You sir are a legend, thank you! Both my seat covers on my A3 fell off randomly within one week. I followed your instructions and now the seats are back in business!
Steven, Thanks for your video. I was about to spend $200 for a new seatback when I saw your video. I finished the repair on my C6 A6 this weekend. I did have to order new clips. I mangled the clips badly taking them out and broke two putting the seat cover back in. If you need clips, it is best to order the clips online. The dealer wanted $10 each for the clips. I ordered them from a VW dealer for $1.89 each. The cost of 10 clips and postage was less than 3 clips from the dealer. lol I tried some epoxy first as I had it in the house. The epoxy did not hold at all. It never seemed to get hard. Perhaps, I did not mix it well enough. I used Gorilla Superglue on my second attempt. That did a lot better. Hopefully, it will hold.
@@ruliz3 That is not good. I don't think that you can buy that piece separately. You would likely need to buy the complete "Seat Back Panel". If you can get the panel in the correct color, it is likely to be close to $300.
Many thanks - A6 2010 and A3 2008. Very common problem. I tried Tesa tape but now I know how the plastic bracket slides off I'm sure I can make a better job this time.
Excellent video, thank you. I have buyers coming to see my A3 and the back of my drivers seat just fell off 😒 I've now cleaned, sanded, and super glued it, now I'm waiting for it to set.
Brilliant ! I looked forever for a way to fix my seat back from coming off. This worked perfectly ! I was unable to fine Sica glue so I used Gorilla Super Glue Precise Gel. 24 hours in clamps did the trick. Couldn't be happier !
Successfully reattached the seat backs of my 2008 A6 following this video. Needed to purchase the pliers he used to remove the clamps. Thanks very much! ... R
Thanks for the video. How did you fix the issue in right seat? I'm having the same problem. The mechanism in the bottom is detached. Did you manage to fix it?
I have fixed mine multiple times and thought I was good to go and then when you sit in the seat and put back pressure on them it pops right off again 😔😔😔
Thank you
You sir are a legend, thank you! Both my seat covers on my A3 fell off randomly within one week. I followed your instructions and now the seats are back in business!
this defect is a very common defect on audi vehicles
Steven,
Thanks for your video. I was about to spend $200 for a new seatback when I saw your video. I finished the repair on my C6 A6 this weekend. I did have to order new clips. I mangled the clips badly taking them out and broke two putting the seat cover back in.
If you need clips, it is best to order the clips online. The dealer wanted $10 each for the clips. I ordered them from a VW dealer for $1.89 each. The cost of 10 clips and postage was less than 3 clips from the dealer. lol
I tried some epoxy first as I had it in the house. The epoxy did not hold at all. It never seemed to get hard. Perhaps, I did not mix it well enough. I used Gorilla Superglue on my second attempt. That did a lot better. Hopefully, it will hold.
@@vocalone23 It was a VW dealer in Wisconsin. The website is www.myvwpart.com/. The part number for the clips is 8Z0867276
I have the same vehicle and I seemed to have lost that black plastic bar at the top 😭
@@ruliz3 That is not good. I don't think that you can buy that piece separately. You would likely need to buy the complete "Seat Back Panel". If you can get the panel in the correct color, it is likely to be close to $300.
@@bobh1572 that’s what I thought 😭
Many thanks - A6 2010 and A3 2008. Very common problem. I tried Tesa tape but now I know how the plastic bracket slides off I'm sure I can make a better job this time.
Great video. My helpless nephew is having this problem, I'll straighten him out. Thank You.
Excellent video, thank you. I have buyers coming to see my A3 and the back of my drivers seat just fell off 😒 I've now cleaned, sanded, and super glued it, now I'm waiting for it to set.
Thanks for the video. I paid a upholstery shop to do this last year but it came apart within a couple of weeks. I'll try this next.
Brilliant ! I looked forever for a way to fix my seat back from coming off. This worked perfectly ! I was unable to fine Sica glue so I used Gorilla Super Glue Precise Gel. 24 hours in clamps did the trick. Couldn't be happier !
Successfully reattached the seat backs of my 2008 A6 following this video. Needed to purchase the pliers he used to remove the clamps. Thanks very much! ... R
This worked like a charm, thank you so much.
Thanks for sharing I have the same problem in my A6 C6 Avant 2.0tdi
thanks for sharing, I'm trying araldite on the Q7 seat backs,
a small wire brush on a drill quickly cleaned up the old glue.
Thanks for this video, it was very informative and helpful!
Thanks a lot you are a real Hero for this Video !
God bless you sir for this video!
Same problem audi a3 2009. Great video. Thank you.
Good job
Thanks for the video. How did you fix the issue in right seat? I'm having the same problem. The mechanism in the bottom is detached. Did you manage to fix it?
Good work
Same issue on my B7 a4 from 2008 smh need to fix it soon
I ve same problem.. Well done... I give it another attempt..
Thank you Assaf, great vedio, if you please give the the Glue F-40 exact name.
congratulations bro
How did you fix the broken piece on the Lombard support adjuster?
Did you find the solution?
Same issue as my 2009 A3
I’d need another black bar. For some reason. I only had one black bar in my car. Do you know where I can find one?
Same here! Did you ever find one? Don’t know what they’re called
Thank you ❤❤🎉
Grazie molto chiaro!
Thanks
smh I never knew the clips slide out wow I used to try to go under the seat to match the clips to blast piece... pain in the ass job fr
How long did they hold?
What one was the best adhesive/glue?
Silver door panel trim pieces are nice. 👍 US did not get.
Hi, holds till today
it stills holds to this day!
Hi, i have exactly the same issue on an A6 did your solution work/last?
I'm happy to say it works till today :)
I'm happy to say it works till today:)
What is the name of that black plastic called. I lost mine
Where is the motor for backrest adjustment located?
From which year is your car?
did you use the same metal clips or did you buy new ones? if new where can I get them from?
Hi, I reused the original clips.
Especially the driver side ..Audi must improve on that Maan...poor setup
I need help
Tnx🙋
I have fixed mine multiple times and thought I was good to go and then when you sit in the seat and put back pressure on them it pops right off again 😔😔😔
These seats have a terrible design. I want my VW CC seats again ☹
Luxurious shit!
cheap plastic crap audi uses. I have this issue on my Audi 07 A3