That Gameboy with the SP screen can go to up 200 bucks, it's very in demand if it the screen mod is done properly, if the screen is still good it might be good to refurbish it on a non-lit model. You can also make a console mod with video out with just the PCB part.
Batman Returns is the best movie ever made. I cannot back that up with any cogent argument, but I can prove I believe that to be true with the following true story. Gateway computers made something called the Destination. The computer cost $7500 and came with an entire Harmon Kardon surround sound stereo with a receiver as speakers. It also came with a 900Mhz wireless keyboard and trackball remote called a "Field Mouse" which never worked. The monitor was a 32 inch Mitsubishi 800x600 CRT. It originally came with a Pentium Pro 200, because the Pentium II was late coming out, but I eventually got a Pentium II. Mine also had a DVD Rom drive, but lacked the horsepower to play my one DVD, "Batman Returns". So I had to buy an additional $300 Hollywood MP4 decoder card, to play it. So I spent almost $8000 in 1997 dollars to watch the DVD of "Batman Returns", that's how good that movie is.
I did! That was the issue! Also it appears the person bought the voltage booster for the AGS-101, rather than the booster for the AGS-101 LCD in a GBA.
@@BenHeckHacks Sweet! You only have to solder that one wire on that radapter to get the 101 screen to work on the GBA. The case cutting is the annoying part IMO but you got that sorted out already hahaha.
the Gameboy Advanced SP AGS 101 has a backlit screen (unlike the first Version the SP AGS 001 with just LED front ligt). It is a very common mod to build a AGS 101 lit screen in a normal style Advanced model.
Hey Ben, a common fault on the first GBAs was the fuse. I bridged it with a cable and worked for me. Then I replaced with a new one. i.postimg.cc/NBTdTNNZ/GBA-1.jpg
I am glad you are into the Arduboy. I still have a dream of reverse engineering a Gameboy Pocket (with actual chips, not FPGA) clone with a sweet OLED screen like that. My skill level is... pretty far from that. Maybe you could give it a shot, but it sounds like you've got a pretty gnarly backlog already.
I did the same mod to my Silver GBA 10 years ago was extremely simple mod when the GBA board works, there's even a conversion cable you can get that has an adjustable brightness switch.
@@BenHeckHacks Also, you should try to consolize a TI - calculator, so it converts the LCD signal to NTSC. And then make a wireless key pad for it. So you can do math on your TV! and/or play TI-calculator games on a TV.
Fyi, using batteries out of vapes (and other disposable electronics) can be problematic because they don't have the little protection boards that off-the-shelf rechargeable Li-Po/Li-On batteries have. With a good charging circuit, it can be safe, but with some of the cheaper charging ICs, not so much, becauss they rely on the battery's protection circuit. On the plus side, if you have an exhausted battery, you can save the little protection board from it and then use it on these cells. And yeah, as others have said, those kitted out gameboys sell for $150 or more due to the artificial boom right now. And that screen is actually more sought after than the modern IPS mods since it was made for the original GBA SP.
Second that. I've seen it several times and keep thinking I will see some redeeming qualities that I've missed before, but nope. But then, every one of the Alien movies leaves me bored as well...
Bladerunner 2049 isn't much better, either. But again, it's not the fault of the cast. They do a great job and the visuals are really good, but the story just sucks.
Sorry, it just isn't. It's literally nostalgia bait. It's not absolute garbage like the new Star Wars movies, but it's pretty much a cash-grab. Kudos on you for enjoying it though :)
Don't feel too bad about not liking blade runner. its mostly loved for its setting and style. the movie has huge story problems like the completely unbelievable love story. the classic movie that i can't stand is 2001 space odyssey. its just an extremely boring and slow paced movie with an impossibly simple and basic storyline that has no deeper meaning. that movie was only ever popular because it melted everyone's brains with how unique the effects were. well, now every movie released every year has effects that blow odyssey out of the water. its like watching the original matrix movie now. its just an ok action movie because the special effects it pioneered are almost boring now
Doesn't think Bladerunner is good and thinks the 2016 ghost busters isn't bad. Wow say it isn't so. Never thought I'd disagree so strongly with Ben. 2016 GB is utter trash. And The original Blade runner is a masterpiece.
It took me until 2020 and the events for me to make it all the way through Bladerunner. I fell asleep everytime after repeated attempts. I love the world they built, they just spend so long building it I just don't care anymore.
"Ben! You're so stupid." Sorry, I don't quite know exactly how the little pressure sensor works either, but I couldn't stand up the offer. Big Clive has taken a few vapes apart, but I'm afraid I can't remember if he's gone into detail on the pressure sensors or if he's found data sheets. What I can remember, though, is that they are indeed some kind of pressure sensors and no microphones. They are just conveniently packaged in the same can as those little mic thingies.
I have seen a video where the sensor from a disposable e-cig/vape was used for 'click' input on an accessibility mouse project where blowing into it operates click. The video said it was PWM which would make me think it's a metallic flap, maybe with a little spring, it it vibrates against a contact when air is drawn over or through it.
having watched Big Clive take apart several of these e-cigs, i know that the data sheet on that chip is readily available and it is a custom chip for the e-cig industry.
@@BenHeckHacks Without going to review the video from Clive what I remember is it is a pressure sensor, led driver, and MOSFET all in one chip. the electret microphone form factor just seems to have fit the application for the e-cig size/shape.
Never liked Batman Returns, I prefer Batman 1989 much more. Returns is just ugly and dour and has too much of that Tim Burton whim which can be cool, but doesn't really work for Batman to me (not that any other Batman movie did anything closer to what I would want). Best Catwoman yet, though. Ghostbusters 2... Ehh..? Now Blade Runner I enjoy. I think it has too much of that 50s nostalgia many 80s movies had, which is kind of a problem, and I feel like it *wants* to have a more expansive world, kind of like 2049 had, but it is too confined and claustrophobic. And OMG, screw alternate cuts. Just give me one version of the story.
I should have added, I'm a HUGE Batman 1989 fan. I bought an Xbox One S just so I could watch the 4K HDR Blu-Ray when WB finally remastered it (cheapest HDR BDR player at the time) But the 2nd movie? Blah.
Force awakens is nostalgia bait slathered over a terrible film. followed by two worse films. Disney makes awful movies now. And is an all around garbage company.
Hope you do make a video on the afterburner. I have two GBAs that were given the AB treatment along with the stealth chip for brightness control in 200...1 maybe 2? I've been thinking about converting one to a newer lit IPS screen, but I am terrified to see what they look like inside. I will say the AB chews through batteries faster than Bud through skintatnium.
'Android 6 that's pretty old' meanwhile i have used a phone that ran android 7 for few years now and have another phone running 4.4 and a tablet running 4.0.1
Isn't that a standard condenser mic element? Possibly with built in logic since it had three prongs exposed instead of two (and the whole chip inside).
@@BenHeckHacks just hope that Bud doesn't lock you out if the workshop when he wears that helmet....then looks into the camera and says "man, humans can be so needy" :)
I do not know why that person wanted to use a Gameboy Advance SP screen on a Gameboy Advance they sell IPS LCD mods for the Gameboy Advance and it is a lot easier to install and are relatively inexpensive to install.
It was a different era of GBA modding. After the front light Afterburner mod but before new (3rd party) lcd kits were being sold. Take an AGS101 SP and mod that into a GBA. Then clone ags101 panels started popping up. And then the last few years we have had many great new ways to mod the gba.
From what I just read, for some reads like the chip is for charge controlling the battery to prevent overcharge? At the least controls atomization and LED when vaping use. Possibly turns battery off when vape pen is empty and control LED to color based on charge status and vaping use if rechargeable. The sensor reads like is possibly just an air flow sensor. Flow or no flow... On/Off or maybe a change in scale to trigger.
There’s no combustion taking place, it’s the vaporization of propylene glycol and vegetable glycerin. Both of which are water soluble food grade substances, approved by our friends at the FDA (who may very well be the biggest hypocrites of all time). This is why vaping is immensely less harmful than inhaling the smoke of burning plant matter in order to get your fix of nicotine (which by the way is the least harmful chemical in a cigarette, and that fact is the whole premise of alternative nicotine delivery).
This may be different with CBD or THC cartridges. (delta-8 (and delta-10) THC cartridges are often sold at CBD shops too.) While it shouldn't produce smoke, it doesn't have glycol or glycerin listed in the ingredients. Delta-8 THC is a synthetic THC made by reacting CDB with another substance in a specific, controlled, manner. A vape cartridge with this in it usually contains something like: "Hemp derived delta-8 THC, terpenes,
Read once that the big anti-vape ad campaign is really about wanting people to smoke for real because there's FAR more tax incentives for the states that way.
@@zenithparsec Yeah , THC carts are oil based. As far as the THC carts you buy from a drug dealer, who knows what's in it. The dumb politicians almost always classify nicotine vaping right alongside this. It's just ignorance and/or corruption.
New ghostbusters wipes out any movie past 1st one. Basicall 2 and 2016 dont exist in Afterlife universe. Yeah some fan crap but story wise it takes place decades after 1 MAYBE 2
From Wikipedia... The word soder comes from the Midde Engish word soudur, via Od French soduree and souder, from the Atin soidare, meaning "to make soid". (Every days a schoo day)
Your kitchen looks like my office, -vaping oil. I am constantly trying to clear enough desk to type lol Your Arnie voice is great. I think he'd be an awesome father in law!
Watching these Ben's rough teardown videos I imagine him freaked out performing a corpse autopsy, removing the liver and putting it in a fridge as a spare liver (only to see it devoured by Bud).
That Gameboy with the SP screen can go to up 200 bucks, it's very in demand if it the screen mod is done properly, if the screen is still good it might be good to refurbish it on a non-lit model. You can also make a console mod with video out with just the PCB part.
Batman Returns is the best movie ever made. I cannot back that up with any cogent argument, but I can prove I believe that to be true with the following true story. Gateway computers made something called the Destination. The computer cost $7500 and came with an entire Harmon Kardon surround sound stereo with a receiver as speakers. It also came with a 900Mhz wireless keyboard and trackball remote called a "Field Mouse" which never worked. The monitor was a 32 inch Mitsubishi 800x600 CRT. It originally came with a Pentium Pro 200, because the Pentium II was late coming out, but I eventually got a Pentium II. Mine also had a DVD Rom drive, but lacked the horsepower to play my one DVD, "Batman Returns".
So I had to buy an additional $300 Hollywood MP4 decoder card, to play it. So I spent almost $8000 in 1997 dollars to watch the DVD of "Batman Returns", that's how good that movie is.
wait you watched dvd's in 1997?? how. And you had a dvd drive in you pc... wtf
@@goeland4585 Actually it was a year or so later, when I got the Hollywood card.
Have you checked the fuse on that GBA? F1 next to the battery terminals.
I did! That was the issue! Also it appears the person bought the voltage booster for the AGS-101, rather than the booster for the AGS-101 LCD in a GBA.
@@BenHeckHacks Sweet! You only have to solder that one wire on that radapter to get the 101 screen to work on the GBA. The case cutting is the annoying part IMO but you got that sorted out already hahaha.
@@DavP0w Yup. He had separated the backlight flex layer from the other layer. I re-soldered it and the "one red wire" mod worked.
My wife and I always crack up at you singing to Bud 😂
the Gameboy Advanced SP AGS 101 has a backlit screen (unlike the first Version the SP AGS 001 with just LED front ligt). It is a very common mod to build a AGS 101 lit screen in a normal style Advanced model.
Don't forget the Scottish, Welsh & Irish pronounce the L and it is Aluminium!
MRE Steve has had botulism 2 or 3 times I think.
Hey Ben, a common fault on the first GBAs was the fuse.
I bridged it with a cable and worked for me.
Then I replaced with a new one.
i.postimg.cc/NBTdTNNZ/GBA-1.jpg
I am glad you are into the Arduboy. I still have a dream of reverse engineering a Gameboy Pocket (with actual chips, not FPGA) clone with a sweet OLED screen like that. My skill level is... pretty far from that. Maybe you could give it a shot, but it sounds like you've got a pretty gnarly backlog already.
You can just drop an IPS display into a Gameboy Pocket. The kits are really popular right now.
Only a zombie cat would enjoy the taste of that pale rotting flesh.
I haven't finished the vid yet (lunch break ending), but is one of the fuses on the GBA blown?
+1, common problem
a new movie idea - The Goatbusters - they try to fight goats
Goat czar the Goat czarian
Hah I was thinking recently I should label all of my stuff with the contact info of someone that would understand it for when I die
I did the same mod to my Silver GBA 10 years ago was extremely simple mod when the GBA board works, there's even a conversion cable you can get that has an adjustable brightness switch.
CBD is weed minus the fun.
"I didn't take your balls....it was the humane society." LMFAO
Well shoot. I was hoping you'd do this whole video in your Elsa Schneider voice. :(
Ghost busters fighting the goat, I would watch, even with female cast.
Somebody starting to become fancy in repairs...is it even worth it to repair compared to Halcyon...?
Shame they never released the original cut of ghostbusters 2 it sounded so much better
It's GameBoy Advance, not "advanced" I can never forgive you. I can't believe you've done this.
Also, off topic, I bought my first broken TI calculator and fixed it last week.
"I was the chosen one! I had the high ground, or something...."
@@BenHeckHacks Also, you should try to consolize a TI - calculator, so it converts the LCD signal to NTSC. And then make a wireless key pad for it. So you can do math on your TV! and/or play TI-calculator games on a TV.
@@hypurban This sort of exists... there's adapters to run a TI onto an overheard projector for classroom demos.
Don't get me started on British pronunciation. Things like they somehow can't see the similarity between school and schedule...
You can say Schnapps can't you?
There's a whole /ɜdʲ/ and it's two syllables long. It's not hard to tell the difference!
I'm in the same boat with Bladerunner. I mean, I understand why it's popular, but I too feel it's pretty overrated.
Make an nes controller with the sensor!
So the brain power comes from the German side, not the Irish.
Fyi, using batteries out of vapes (and other disposable electronics) can be problematic because they don't have the little protection boards that off-the-shelf rechargeable Li-Po/Li-On batteries have.
With a good charging circuit, it can be safe, but with some of the cheaper charging ICs, not so much, becauss they rely on the battery's protection circuit.
On the plus side, if you have an exhausted battery, you can save the little protection board from it and then use it on these cells.
And yeah, as others have said, those kitted out gameboys sell for $150 or more due to the artificial boom right now. And that screen is actually more sought after than the modern IPS mods since it was made for the original GBA SP.
its hemp ben heck not nicotine
29:53 ben heck I love you
whens the get high with ben episode
Ben heck smoking some weed CBD lol Ben Go see Ghostbusters afterlife you’ll be surprised
Ghostbusters 2016 was bad all around. The writing, acting and story telling was bad AF.
It's OK, Ben, Blade Runner is terrible and you don't have to pretend it's not.
Take it back...
Second that. I've seen it several times and keep thinking I will see some redeeming qualities that I've missed before, but nope.
But then, every one of the Alien movies leaves me bored as well...
Bladerunner 2049 isn't much better, either.
But again, it's not the fault of the cast. They do a great job and the visuals are really good, but the story just sucks.
@@awo1fman I catch you say shit like that irl u gon catch these hands.
Jk. I love blade runner but god I don’t get the Alien franchise.
Couldn't agree more. It's one of the ultimate cinematic examples of style over substance
Man be careful what you stick in your mouth. From this stick you might get lip cancer.😬😬
It's okay, the solder fumes will kill the cancer cells (maybe) 😀
Ghostbusters: Afterlife is worth watching Ben, take it from someone who return to the movie theatres after 21 months just to see it.
Sorry, it just isn't. It's literally nostalgia bait. It's not absolute garbage like the new Star Wars movies, but it's pretty much a cash-grab.
Kudos on you for enjoying it though :)
That newer nexus is a 2012. Using one to say this. Custom firmware still strong
23:28 "That's not NFC, is it? Not on a tablet like this." Cable to antenna stamped NFC_VFC_INPAQ.
2:33 One of the great joys of recycling vape batteries.. that, and sometimes the cells will smell like piña colada or whatever flavor it is heh
You build controllers for people with only one conventially functional hand.
That's heroic when nobody else does it.
This. Ben Heck is one Heck of a guy. Get it? Ben?
Big Clive has a video on vapes like that, in his video he explains it's a pressure sensor.
Keep up the great work Ben.
Big Clive also has a whole lot of videos on eating MREs.
Please tell me that's a mic... OMG I'm going to have so much fun messing with the conspiracy theorists.
"Like, it links directly to the ATF and the Feds, man!"
Don't feel too bad about not liking blade runner. its mostly loved for its setting and style. the movie has huge story problems like the completely unbelievable love story. the classic movie that i can't stand is 2001 space odyssey. its just an extremely boring and slow paced movie with an impossibly simple and basic storyline that has no deeper meaning. that movie was only ever popular because it melted everyone's brains with how unique the effects were. well, now every movie released every year has effects that blow odyssey out of the water. its like watching the original matrix movie now. its just an ok action movie because the special effects it pioneered are almost boring now
"what is this, some kind of a tube?" I lost my shit haha
What no Wall-e, reference with all this talk of trash?
Doesn't think Bladerunner is good and thinks the 2016 ghost busters isn't bad. Wow say it isn't so. Never thought I'd disagree so strongly with Ben. 2016 GB is utter trash. And The original Blade runner is a masterpiece.
I think Ben is just talking crap to be controversial and edgy. Then again there is no accounting for taste if that's how he really feels.
Doesn't like Blade Runner, Batman Returns, or Ghostbusters 2.
Ghostbusters 2016 "not that bad."
"…trying to find the goat…" say the subtitles.
It took me until 2020 and the events for me to make it all the way through Bladerunner.
I fell asleep everytime after repeated attempts. I love the world they built, they just spend so long building it I just don't care anymore.
Bud is the star of the show.
"Ben! You're so stupid."
Sorry, I don't quite know exactly how the little pressure sensor works either, but I couldn't stand up the offer. Big Clive has taken a few vapes apart, but I'm afraid I can't remember if he's gone into detail on the pressure sensors or if he's found data sheets. What I can remember, though, is that they are indeed some kind of pressure sensors and no microphones. They are just conveniently packaged in the same can as those little mic thingies.
This, the diaphragm migh actually just act as a switch.
I have seen a video where the sensor from a disposable e-cig/vape was used for 'click' input on an accessibility mouse project where blowing into it operates click.
The video said it was PWM which would make me think it's a metallic flap, maybe with a little spring, it it vibrates against a contact when air is drawn over or through it.
Anyone else cringed when he started cutting at the battery?
Nexus 7 has Qi charging and NFC.
Send the GBA to Eliot Cole. If anyone can fix it I'd put my money on him.
Just chuck the SP screen out and go get a modern drop in IPS screen instead. Way better.
Solder, because sod is another word for dirt and soder is just more of the same.
( Them: You Sod Me: Well you soder )
23:39 it IS an NFC sensor. I use the same tablet for writing NFC disks.
If you smoke CBD long & hard enough you'll get stoned off it but it's more about calming down & mild pain relief
You need to cut away some of the plastic in the front panel so the screen fits, the cable adapts it for the gba
This stuff gained value largely due to The Retro Future repopularising the console with modS and mod showcases.
@@SlavTiger and hardware mods coming out for loads of handheld consoles
having watched Big Clive take apart several of these e-cigs, i know that the data sheet on that chip is readily available and it is a custom chip for the e-cig industry.
Big Clive is awesome!
So its pressure? Yeah it had markings but no results.
@@BenHeckHacks Without going to review the video from Clive what I remember is it is a pressure sensor, led driver, and MOSFET all in one chip. the electret microphone form factor just seems to have fit the application for the e-cig size/shape.
th-cam.com/video/eWxwoJgvZIA/w-d-xo.html
Those Gameboy's have fuses on the PCB, might have gotten blown accidentally.
Talks about building a game about mining garbage... while mining garbage.
Never liked Batman Returns, I prefer Batman 1989 much more. Returns is just ugly and dour and has too much of that Tim Burton whim which can be cool, but doesn't really work for Batman to me (not that any other Batman movie did anything closer to what I would want). Best Catwoman yet, though.
Ghostbusters 2... Ehh..?
Now Blade Runner I enjoy. I think it has too much of that 50s nostalgia many 80s movies had, which is kind of a problem, and I feel like it *wants* to have a more expansive world, kind of like 2049 had, but it is too confined and claustrophobic. And OMG, screw alternate cuts. Just give me one version of the story.
I should have added, I'm a HUGE Batman 1989 fan. I bought an Xbox One S just so I could watch the 4K HDR Blu-Ray when WB finally remastered it (cheapest HDR BDR player at the time) But the 2nd movie? Blah.
Force awakens is nostalgia bait slathered over a terrible film. followed by two worse films. Disney makes awful movies now. And is an all around garbage company.
Bud is the King of the Castle!!!
I watched the new Ghostbusters movie and I liked it - the nostalgia didn't get annoying until the very end of the film.
With that leonardo, will the device behave like a game controller if you plug it into a PC?
Wow, caught up on your projects? Someone's been making good use of NNN.
Hey I vape reefer while I watch your videos, you vaping to make them is just the circle of life 🤣
Would love to see a disposable vape pen turned into a covert listening bug.
Hope you do make a video on the afterburner. I have two GBAs that were given the AB treatment along with the stealth chip for brightness control in 200...1 maybe 2? I've been thinking about converting one to a newer lit IPS screen, but I am terrified to see what they look like inside. I will say the AB chews through batteries faster than Bud through skintatnium.
'Android 6 that's pretty old' meanwhile i have used a phone that ran android 7 for few years now and have another phone running 4.4 and a tablet running 4.0.1
23:29 that's the wireless charging coil.
Isn't that a standard condenser mic element? Possibly with built in logic since it had three prongs exposed instead of two (and the whole chip inside).
Ben can you come and hang out in Australia sometime?
Not these days I'm afraid.
@@BenHeckHacks aw C'mon! Our wild animals will only kill you a little bit? Plus you can taste our fine stereotyped cuisine of Tim tams and Vegemite!
Well that's an idea, turn portable game devices into non portable tv/projector output and DC input.
Awesome! I can’t sleep anyway!!! More madness of Heck👌🏻💯
"Why am I even doing this?" It's ok bud. I ask myself the same thing every day 😅
Your vape pin is spying on you.
"You took my balls..."
I find that the best way to start the day is to succumb to laughing uncontrollably.
Thanks Ben! :)
"Where are my testicles Summer?"
@@BenHeckHacks just hope that Bud doesn't lock you out if the workshop when he wears that helmet....then looks into the camera and says "man, humans can be so needy" :)
"Did you lose any weight yet?"
*licks tummy*
:D
your captain planet melody sounded like captain scarlet
You gave Bud the chance of aiding you willingly, but he has elected the way of... PAGAN!
"When did Bud the Wise abandon reason for MADNESS?"
I do not know why that person wanted to use a Gameboy Advance SP screen on a Gameboy Advance they sell IPS LCD mods for the Gameboy Advance and it is a lot easier to install and are relatively inexpensive to install.
It was a different era of GBA modding. After the front light Afterburner mod but before new (3rd party) lcd kits were being sold. Take an AGS101 SP and mod that into a GBA. Then clone ags101 panels started popping up. And then the last few years we have had many great new ways to mod the gba.
@@EB01 indeed. I'd still say Ben should get rid of the SP screen and get a modern IPS kit if he plans to make something useful out of it
"..IF they made a fourth movie."
Thank you Ben.
Or a fifth
Blade Runner was awesome!
Absolutely one of the most iconic movies of all time but beware of "Blade Runner 2049".😁
@@crazyedo9979 Actually, an Imdb rating of 8.0 says otherwise
Maybe a pressure variable capacitor?
The tapper port looks really clever
is it a tube?
From what I just read, for some reads like the chip is for charge controlling the battery to prevent overcharge? At the least controls atomization and LED when vaping use. Possibly turns battery off when vape pen is empty and control LED to color based on charge status and vaping use if rechargeable. The sensor reads like is possibly just an air flow sensor. Flow or no flow... On/Off or maybe a change in scale to trigger.
Thumbs up cause of bud biting you
There’s no combustion taking place, it’s the vaporization of propylene glycol and vegetable glycerin. Both of which are water soluble food grade substances, approved by our friends at the FDA (who may very well be the biggest hypocrites of all time). This is why vaping is immensely less harmful than inhaling the smoke of burning plant matter in order to get your fix of nicotine (which by the way is the least harmful chemical in a cigarette, and that fact is the whole premise of alternative nicotine delivery).
This may be different with CBD or THC cartridges. (delta-8 (and delta-10) THC cartridges are often sold at CBD shops too.)
While it shouldn't produce smoke, it doesn't have glycol or glycerin listed in the ingredients.
Delta-8 THC is a synthetic THC made by reacting CDB with another substance in a specific, controlled, manner. A vape cartridge with this in it usually contains something like: "Hemp derived delta-8 THC, terpenes,
Read once that the big anti-vape ad campaign is really about wanting people to smoke for real because there's FAR more tax incentives for the states that way.
@@BenHeckHacks Exactly, Ben
@@zenithparsec Yeah , THC carts are oil based. As far as the THC carts you buy from a drug dealer, who knows what's in it. The dumb politicians almost always classify nicotine vaping right alongside this. It's just ignorance and/or corruption.
I still use nexus 7 every day. Great tablet
Watching this on a Nexus 7 🙂
make cheap modded vape pipe. lol
I had a 2013 Nexus 7 in 2013. It mostly survived falling in the bath… is there a modern equivalent?
Ben Heck, you and i are brothers from another mother, Yo.
"Insta-Pot" fucking killed me.
Hey! Instant pots are cool!
i know. it was the 'squirrel' like approach that got the point across.
New ghostbusters wipes out any movie past 1st one. Basicall 2 and 2016 dont exist in Afterlife universe. Yeah some fan crap but story wise it takes place decades after 1 MAYBE 2
From Wikipedia...
The word soder comes from the Midde Engish word soudur, via Od French soduree and souder, from the Atin soidare, meaning "to make soid". (Every days a schoo day)
I finally got my video edited recapping my old se30! Thanks for all the tips and inspiration
For I shall be your companion.... your provider... and... Your MASTER !!! UHHAHAHAHAHAAAaa.......
Your kitchen looks like my office, -vaping oil. I am constantly trying to clear enough desk to type lol
Your Arnie voice is great. I think he'd be an awesome father in law!
Watching these Ben's rough teardown videos I imagine him freaked out performing a corpse autopsy, removing the liver and putting it in a fridge as a spare liver
(only to see it devoured by Bud).