Nissan Altima 2013-2016 double din+parking brake bypass+axxes aswc1
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- showing how to install double din, a few things to make installation easier. should work on atlas 2013-2015 maybe 2016 and newer model.Any questions comment and ill get back at y'all. thanks
Nissan Altima 2013-2015 rear view cam: • Nissan Altima 2013-201...
I had to take apart a 2016 Nissan Altima but can't remember how to install the new carpet and wiring
2013 Nissan Altima… Where does that green and yellow wire go I can’t seem to figure out that one wire and I look it up and can’t find anything on it. I think that’s why my steering wheel controls don’t work yet
Can show the Plug an play part ? And what harness did you buy ?
Just watched your video its very helpful. I have a 2014 nissan altima what wire harness did you use
Which wires did you connect the steering wheel control to?
Hey the ground from the car wire harness or the radio wire harness goes to that ground spot?
Help me ! Anyone. I have 2017 nissan altima and I cut the wire that connects to ac control panel 16 pin. 1 brown 3 blue 3 pinks 2 yellow 2black 2 green 1 whitev1 red 1gray . I can't find which wire is witch
Do you have a link to the resistors you used?
How do you get sound from the speaker
My A/C did work..
Until I put the factory raido back in
Hello it’s a good video
Where did you buy the screen touch radio? I want to install it to my Nissan Altima 2014
TheBossHacker Jr it's a double din app radio 4 you can get it on amazon or eBay there's a new app radio the 1300nex also an app radio and it's much cheaper I'm installing one of these on a vehicle I just bought I will post a video and you can decide what to get and thanks man!
was wondering if u have the issue with the steering wheel controls where they work around every other time u turn the car on it’s really odd
Bleu Weisner haven’t had the car for about 2 years man, but the car was always working fine with the steering wheel controls
I could not make my interface work, I bought that same axxess aswc1, My stereo is a Power Acoustik PDN-626B, Maybe this interface is incompatible with this brand because it already configures all the brands and the buttons do not work to change the songs, but the buttons to raise and lower volume and source nothing else.I would appreciate it if you know something about it.
Yeah man most likely it’s because of the brand. I usually only use pioneer and the axxes works great with the radio. So I’m guessing it’s because of that
I have the same setup still cant get to work
What does hooking up the brake wire do? I seen it and just tucked it in lol
Basically so you can use your Bluetooth setting while driving and also to watch videos while driving that’s all. Most radios you tap brake wire to a ground you’re good
Was the original stereo the basic one without the navigation? And can you still use the steering wheel buttons to navigate the screen on the instrument panel?
Jon Simonzi it was one of the basic radios, and yes everything will work the same if install a steering wheel control interface
Man..how did you make that your ground? Were you able to reach your hand behind there so you could tighten from the front? I like that spot, but I can't get my back there.
It’s easy bro just grab it with your finger on one side and grab a wrench to tighten the bolt
Did you retain the factory USB / Aux ports?
No I did not
Where did you hook up the Vehicle Speed Sensor wire to on the steering wheel module? I can’t figure it out on my same year Altima.
There is no sensor. the wires that I tapped come from the steering wheel
@@yungmexican32 thanks buddy!
I have a 17 altima and no one has a wiring harness adapter for it but I found one online but I'm hesitant to buy it and it don't work and not to mention it's gonna cost 45$ I have 5 plugs in the back of factory radio any suggestions
This is the kit I bought, www.amazon.com/Nissan-Altima-2013-2014-Harness-Install/dp/B01ES2XWR8/ref=sr_1_4?ie=UTF8&qid=1509657074&sr=8-4&keywords=2013+Altima+dash+kit
If you want your steering wheel controls to work you gotta get an axxes steering wheel interface.
www.ebay.com/itm/Metra-95-7617GHG-Double-DIN-Dash-Kit-For-Select-2013-Up-Nissan-Altima-Vehicles/302117100763?fits=Year%3A2017%7CModel%3AAltima&epid=1222214786&hash=item4657951cdb:g:dGQAAOSwMVdYDleJ&vxp=mtr
That one is on eBay, you can contact sonicelectronics to get the correct wiring harness
I have the premium audio package and can't find the right harness any suggestions?
What do you mean by premium? Bose system?
ALLDATIM3 LAKERZZ32 A%A
Thank From Indonesia/Australia. Help me put Android in 2015 pulsar
Hey bro do you replacement the dash board too or is the factory dashboard panel same ?
www.ebay.com/itm/332588545158
That’s all you need bro
And what inche is your radio ?
It was a 6.2
So if u buy wiring harness u have to get the axxess aswc-1 with it? And what else
MrJrayshaun70 you don’t have to bro unless you want steering wheel controls to work
Where did you get bypass
U get resistor off amazon to I see one that’s a 10k ohm 1/4
Everything on amazon bro and the axxes aswc comes with resistors and instructions
Im having trouble with the interface recognizing my pioneer avh 601ex. How did you hook up all the other wires you have to ground from the interface? Did you ground them to the chassis like the stereo or did you use the ground from the stereo plug
I tapped everything to the wire coming from the chassis
I finally got it to work but what did you hook up the parking brake wire from the stereo to?
Royal D you have to get a parking wire bypass you can get it on amazon or eBay but try tapping it to chassis first if that works then your good if not then you need a bypass
yungmexican32 i got the bypass but i cant get it to work for some reason
Royal D I think it has a blue wire black and green. Green goes to green long wire on pioneer the blue can go to power amp/antenna and black to chassis.
What is the radio you have here and what is all you used in here
*Mvh-1400nex
*Axxess aswc-1
And a pioneer bypass to play video while driving
Also aftermarket radio harness for Altima 2013
Thanks 🙏🏽 I appreciate that!!. Do you think 🤔 it would work for a 2016 Altima?!
@@Numbins21 pretty sure, look up 2016 Altima radio kit on Amazon
@@Numbins21 it’s your car the s model? That’s what mine was
Where you got than resistor? Online?
incomparable2312 yeah bro couldn’t find them any where else
Please help!!! at the last part after connecting the resistance between the pink and the blue pink wires, other than the green/yellow wire that goes to pin 7..... I have no more wires to connect to pin 8 ... or is it that I have to make an extension from the two with another piece of wire to connect to pin 8 ???
For the steering wheel control module?
@@yungmexican32 yes !
Hi again.. my doubt was because on the devise instructions from the website does not mention the green/yellow /wire. Watching your video again and again, you clearly indicate that other than red, black, pink, and blue/pink... All the rest of the loose wires should be attached together to ground which I finally did.. You did great with your video! Thank you!
That’s not the same for a 16
djgblaze no filters not sure man
This a joying head unit
It's the piooner app radio 4