There are instructions on how to reset the counter in the manual. I used these instructions (from a page of a digital manual) from this link (below), which worked for a Lexmark MX711de. +While ultimately they only last so long, you can get more life/better performance from the rollers by cleaning them, and (if necessary) relubricating the moving parts. I've even had an ADF's performance become bad, inspected the roller parts, and found a staple wedged into a roller before. Link: www.manualslib.com/manual/836164/Lexmark-Mx610.html?page=186
![[LIVE] : ONE ลุมพินี 86 | คู่เอก "คมเพชร vs ชาติพยัคฆ์"](http://i.ytimg.com/vi/m3q_dRYDuU8/mqdefault.jpg)
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
I replaced it but it still says “replace maintenance kit” what should I do next?
I'm sure you have it fixed by now, but you have to reset the roller count
There are instructions on how to reset the counter in the manual. I used these instructions (from a page of a digital manual) from this link (below), which worked for a Lexmark MX711de. +While ultimately they only last so long, you can get more life/better performance from the rollers by cleaning them, and (if necessary) relubricating the moving parts. I've even had an ADF's performance become bad, inspected the roller parts, and found a staple wedged into a roller before. Link: www.manualslib.com/manual/836164/Lexmark-Mx610.html?page=186