I have some rather nasty looking brake fluid in my clutch actuator reservoir, how do I reliably empty it and bleed it without redoing the master cylinder?
just had the gearbox out fiat 595 and had to disconnect the clutch line on the mta actuator ,all back together and wont select a gear just clunking ,how to bleed the system or is a scan tool needed to repressurise it
I have tried to manually bleed the system on my Corsa D 1.2 easytronic clutch but there is still no drive. Would you recommend a diagnostic bleed using TECH2? Is it then necessary to re learn 'Touchpoint Adaptation' then do the 'Learn Gearbox Parameters'??
Hi I have a fiat ducato 2013 with a comfort matic gear gear box. I can't find any instructions on changing the clutch fluid can you help please. Ps I am an x AAman of 17 years . Can you expell the mith that it must be fun at the dealership.
Hi, I replaced the brushes and carried out the bleeding, the car ran well for a week, now the error is P2789 clutch A learning at the limit. What can it be??
hello! thank you for your video! i just got my tcu back from repair from you.. i have mounted it now. i wonder witch DOT i should use on the break fluid thank you
About to refit and bleed after using your repair service. Once fit and bled correctly, will I need to clear the previous fault code or will the ‘F’ disappear. My fault code was P1607. Btw great service quick turnaround turn. Thanks guys
Hi. Thank you for the great feedback! If the steps in this video don't fix your problem and you suspect the easytronic gearbox may be at fault, then please feel free to contact our technical support team at info@ecutesting.com and they will be happy to assist you further. Thanks
Can you help me I did same Procedere now my Corsa Easytronic in Position A dont move I put Acelaterter but it just jumps. As soon i put Position R Reverse Gear. Engine stoppt Immediately. Can you help thanks
Hi. Those fault codes indicate that there could be a problem with the voltage to the clutch actuator, or the feed from the clutch actuator to the gear selector. This could be caused by damage to the wiring looms so we would recommend checking these looms for continuity and for any signs of damage. If these checks don't identify the problem, then it could be a problem with the gear selector or clutch actuator themselves. If this is the case then you are welcome to send these units into us for testing and a potential re-build.
Hello pal do you repair any of the easytronic components ie electronic clutch actuators? because my daughters corsa is showing an F on dashboard and it wont start
Hi. Yes we do remanufacture Easytronic clutch actuators for the Vauxhall Corsa. Follow this link: www.ecutesting.com/product-catalogue/vauxhall/corsa/ecu-transmission-combined-clutch-actuator/ and select the part number which matches the part number of your unit for pricing and instructions of how to send your unit into us. If you don't see your unit's part number on our website please contact our technical support team via email at info@ecutesting.com with the following details. Your vehicle's make, model and year of manufacture, the symptoms of the fault, any results of a diagnostic scan i.e fault codes, and any attempted fixes already carried out. Thanks.
Hi we have a Opel Corsa D 1.2 Easytronic 2008 and we have the problem with the F symbol. Car is not staring. What software is best to use to read the codes and which software is used when you want to do bleeding with the diagnostics? And if we send the clutchactuator and you fix the clutch. Is it then install bleed and ride. Or is there need of programming? Car is worth maybe 2k and workshops are askin 800 to fix this but i find it not worth it. So i would like to try it myself. Thank you in advance.
Hi. These are common symptoms of the clutch actuator failing, and we would recommend using tech 2 diagnostics to read fault codes and bleed the system, however you can bleed it manually following the instructions in the video above. If you send your unit into us all you will need to do is re-fit and bleed it as all prior programming is retained during our re-build procedure. Follow this link to find out more information: www.ecutesting.com/common-faults/vauxhall/corsa-12-easytronic-clutchgearbox-actuator/ If you have any further questions feel free to contact our technical support team at info@ecutesting.com. Cheers.
Hello I have a Ford Fiesta Ecoboost 1.0L 2014 I have the following error codes on our car P090C, Camshaft Position l- Timing over-advanced or system performance bank 1, P0012, P0014, P0015, P0299, P0340
Hi. Based on the fault codes you have listed, we would recommend ruling out a faulty camshaft position sensor before moving onto other diagnosis. If you want to know how to test your cam sensor, check out our video here: th-cam.com/video/FTY11IeWBsk/w-d-xo.htmlsi=cqt_vpc8WhsZcTa7
Hi José. We will need a part number to confirm if we sell the specific ECM you are after. Could you email the part number to info@ecutesting.com and we will be able to help you out. Cheers
@@Bas20005 Hi. The manufacturer recommends using Dot4 brake fluid as the clutch actuator is a hydraulic system, and this fluid is used in these systems. Automatic transmission fluid is a different consistency, and therefore not applicable to this system. Hope this helps!
Hi. We would be happy to re-build your unit and we offer a worldwide service! Fill in our online test form at ecutesting.com, or email our technical support team at info@ecutesting.com with the following details; any fault codes, symptoms of the fault, and the car make and model. Thanks!
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
Hey guys great video
Just a quick one is there a video on the best way to remove one of these prior to the repairs?
I have some rather nasty looking brake fluid in my clutch actuator reservoir, how do I reliably empty it and bleed it without redoing the master cylinder?
just had the gearbox out fiat 595 and had to disconnect the clutch line on the mta actuator ,all back together and wont select a gear just clunking ,how to bleed the system or is a scan tool needed to repressurise it
I have tried to manually bleed the system on my Corsa D 1.2 easytronic clutch but there is still no drive. Would you recommend a diagnostic bleed using TECH2? Is it then necessary to re learn 'Touchpoint Adaptation' then do the 'Learn Gearbox Parameters'??
Hi I have a fiat ducato 2013 with a comfort matic gear gear box. I can't find any instructions on changing the clutch fluid can you help please. Ps I am an x AAman of 17 years . Can you expell the mith that it must be fun at the dealership.
Hi, I replaced the brushes and carried out the bleeding, the car ran well for a week, now the error is P2789 clutch A learning at the limit. What can it be??
Hi, will this work on a Honda equipped with an ishift actuator?
Does this procedure work with i-shift transmission in Honda Jazz.I'd like to try but little sceptical
how much should be the pressure on the gauge!!
hello! thank you for your video! i just got my tcu back from repair from you.. i have mounted it now. i wonder witch DOT i should use on the break fluid thank you
Hi, thank you for using our service! The manufacturer recommends using Dot4 brake fluid.
Excellent demonstration on how to fix this problem. Thanks!
About to refit and bleed after using your repair service. Once fit and bled correctly, will I need to clear the previous fault code or will the ‘F’ disappear. My fault code was P1607. Btw great service quick turnaround turn. Thanks guys
Hi. We will have cleared all codes during our remanufacturing process, so the F should disappear once the unit is re-fitted and bled.
Excellent video, hope this will fix my problem... Thank you
Hi. Thank you for the great feedback! If the steps in this video don't fix your problem and you suspect the easytronic gearbox may be at fault, then please feel free to contact our technical support team at info@ecutesting.com and they will be happy to assist you further. Thanks
Hi thanks for this video :) Can I ask you, please? Is it same on Hyundai iMT (i30 2023). Thank you.
No, this is Clutch actuator specific for Easytronic (Opel/Vauxhall)
Can you help me I did same Procedere now my Corsa Easytronic in Position A dont move I put Acelaterter but it just jumps. As soon i put Position R Reverse Gear. Engine stoppt Immediately.
Can you help thanks
Hi. Are you able to scan the vehicle for any fault codes at all? If you were able to read these it would help us to diagnose the issue. Cheers.
@@Ecutestinglimited yes I did fault Code
P1725 , P1726, P0560
Hi. Those fault codes indicate that there could be a problem with the voltage to the clutch actuator, or the feed from the clutch actuator to the gear selector. This could be caused by damage to the wiring looms so we would recommend checking these looms for continuity and for any signs of damage. If these checks don't identify the problem, then it could be a problem with the gear selector or clutch actuator themselves. If this is the case then you are welcome to send these units into us for testing and a potential re-build.
Hello pal do you repair any of the easytronic components ie electronic clutch actuators? because my daughters corsa is showing an F on dashboard and it wont start
Hi. Yes we do remanufacture Easytronic clutch actuators for the Vauxhall Corsa. Follow this link: www.ecutesting.com/product-catalogue/vauxhall/corsa/ecu-transmission-combined-clutch-actuator/ and select the part number which matches the part number of your unit for pricing and instructions of how to send your unit into us. If you don't see your unit's part number on our website please contact our technical support team via email at info@ecutesting.com with the following details. Your vehicle's make, model and year of manufacture, the symptoms of the fault, any results of a diagnostic scan i.e fault codes, and any attempted fixes already carried out. Thanks.
Hello, i have a Opel Corsa 1.2 2001 with Easytronic. What should i use to perform this? DOT 4? thank you!
Hi, apologies for the delayed response. The manufacturer recommends using Dot4 brake fluid as the clutch actuator is a hydraulic system. Thanks
Hi we have a Opel Corsa D 1.2 Easytronic 2008 and we have the problem with the F symbol. Car is not staring.
What software is best to use to read the codes and which software is used when you want to do bleeding with the diagnostics?
And if we send the clutchactuator and you fix the clutch.
Is it then install bleed and ride.
Or is there need of programming?
Car is worth maybe 2k and workshops are askin 800 to fix this but i find it not worth it.
So i would like to try it myself.
Thank you in advance.
Hi. These are common symptoms of the clutch actuator failing, and we would recommend using tech 2 diagnostics to read fault codes and bleed the system, however you can bleed it manually following the instructions in the video above. If you send your unit into us all you will need to do is re-fit and bleed it as all prior programming is retained during our re-build procedure. Follow this link to find out more information: www.ecutesting.com/common-faults/vauxhall/corsa-12-easytronic-clutchgearbox-actuator/
If you have any further questions feel free to contact our technical support team at info@ecutesting.com. Cheers.
Hello I have a Ford Fiesta Ecoboost 1.0L 2014 I have the following error codes on our car P090C, Camshaft Position l- Timing over-advanced or system performance bank 1, P0012, P0014, P0015, P0299, P0340
Hi. Based on the fault codes you have listed, we would recommend ruling out a faulty camshaft position sensor before moving onto other diagnosis. If you want to know how to test your cam sensor, check out our video here: th-cam.com/video/FTY11IeWBsk/w-d-xo.htmlsi=cqt_vpc8WhsZcTa7
❤❤❤❤Great job
You sell ECM´s. I need one. Ford Scape 2012 2.4L. 4cilynder A/T.
Can you help me?
Thankyou.
Hi José. We will need a part number to confirm if we sell the specific ECM you are after. Could you email the part number to info@ecutesting.com and we will be able to help you out. Cheers
Which Brake fluid is this.? Normaly is Gear Fluid or?
Hi. It is Dot4 brake fluid.
@@Ecutestinglimited ok then i buy this, i thought that Automatik gear Fluid. I dont unterstand why Brake fluid?
@@Bas20005 Hi. The manufacturer recommends using Dot4 brake fluid as the clutch actuator is a hydraulic system, and this fluid is used in these systems. Automatic transmission fluid is a different consistency, and therefore not applicable to this system. Hope this helps!
@@Ecutestinglimited ok thanks alot I ll buy DOT 4
I Need Repair my Easytronic problem ( F ) , my car is Opel Corsa C Model 2001 , My location is Tripoli - Libya .
Hi. We would be happy to re-build your unit and we offer a worldwide service! Fill in our online test form at ecutesting.com, or email our technical support team at info@ecutesting.com with the following details; any fault codes, symptoms of the fault, and the car make and model. Thanks!