For a person that thought he knew everything i did not know about the flat spot for hitch clip rotation. Excellent tip as usual keep up the great work!
You are the best mower poster on TH-cam, articulate and clear explanations. I can't tell you how much I appreciate your vids, thanks for all of your hard work putting these together and especially sharing your knowledge.
Great video brother. I'm a veteran who really enjoys simple and direct instructions. Your explanations were outstanding. You should have been a soldier. We need men who can train well and keep our young men squared away.
Thank you for being clear & concise. I have an old GT6000 with a 50" deck, so yes more pulleys, arms, etc. My belt came off before completing my first mow this season & needed a refresher & a boost of inspiration to get back out there & pull the deck off. Once I get my first mow completed, I usually replace my blades. Again, taking the deck off. The deck weighs half of what I do, so kind of a bugger to muscle around. Lol. Great video & I appreciate your VERY helpful tips throughout.😊
very good video its has been over a year since i took off my deck and needed a refresher course Thank You again and I watch all your videos thumbs up again
This was a GREAT video!! My father and I found this very helpful and we are going to replace our belt this evening armed with your knowledge good sir! Please make more videos!! 👍 thanks again!
Thanks man... been looking everywhere as to how the control rod for the blades works. Your explanation in the middle of the video was perfect. My attachment engagement levar is extremely difficult to press forward. I just put a new belt on and everything is good. Now that I know how the tension is applied I can give it a once over again.
Fantastic video, the way you explain the mechanism by which everything operates e.g. how the blade engage rod provides tension adjustment to the belt helped me understand and therefore troubleshoot much better than any other video I have seen. Most other guys are like yeah pull out these pins and throw the belt on good luck. Yours is top notch. Keep it up.
The piece you see at 3:50 I believe you called an idler pully rod. (the up and down portion with the paddle and hole in the top is broken on my lawn mower. Where can I find that? It is almost the same model as you have in this video, except my starter and gears are on the right side next to the seat instead of the floor.
Great detailed video for replacing belt. I have this lawnmower and need to raise the deck, cuts to low in highest setting (6), do you have a video to explain process to get deck up, seems it doesn't allow the front to go up, just the rear. Thanks again.
Thanks for the video-- do you know the belt size for the transmission? 1/2" by 95 is what I measured, but its stretched and damaged.. bought used with no info!
I do Marine repair for a living and your video is excellent and very well thought out . The one thing I would recommend to everybody when you pull your deck is flip it over and check the blades . If they are worn or have huge nicks in them its easier to replace the blades while you got the deck out . I had to put in a standard black V belt in my deck because nobody in Elko nv has them I couldnt even order one and Homo Depot decided to eliminate half their mower parts and no long carry the belt for my deck they used to carry. Before there was two full long racks of belts now its down to half that and most of parts they had are gone. Had to go Ebarf and order the belt but I lucked out and got two for 30 plus tax free ship. Can you do a video on adjusting the tension? My pivot is threaded for my tension rod and you have to take it off to adjust the tension how can you get proper tension when you have to remove the pivot everytime? if they had just took the pivot and slid it on the rod with no threads with two jam nuts you could adjust it on the mower with the rod in place. Makes no sense 🤔
Those spring clips aren't high-grade, unbendable spring steel. They are slightly malleable. You can bite them with some pliers and make them tight again. That one didn't open up because of age, wear, etc. It opened up because someone brute-forced it off last time they worked on it. Anyhow, really, REALLY thorough video. Well-done.
Hello , Is it possible to change the Blade Belt without taking the deck out? I am 74 and working on this in the yard so it's a little hard to pull the Deck out. If you see this soon please let me know. Thanks, Larry
I know your busy but i have aQ do i need to change the rod on top of deck mower that i changed from a42 in. Deck to a38 in. Deck should it be changed. The belt is tight i think it should be less tension but idk could you tell meoh maybe youjust told me
I have a similar mower , wish I would have seen this before changing my belt. I did manage to change it without dropping the blades. Any hacks for a muffler on this model? I cant find the right size.
Mine comes out the left side, goes forward to the front and the round muffler aims downward at the end of the exhaust pipe. It's all one unit and a replacement is over $100! I went to a machine shop with the entire assembly and a screw on 12hp muffler from Lowe's. They made me an exhaust pipe assembly (cutting up the original one) with a threaded pipe aiming downward to accept my $7.00 muffler replacement. They charged me $20.00! Beats $100!
I would like to see how you replace the blade engagement cable on a Craftsman model #917.2880 31. There are several videos on how to do it but I'd like to see how YOU do it. I do have the cable and am about to try my hand at it. Just curious.
I have a lawn mower like that except it was a craftsman Ferrari model and I’m trying to find the price of the cost to sell it but can’t find it can y’all help me
Hi excellent videos what I would say obviously you’re in a controlled environment but just for people trying to copy what you’re doing is put the key in their pocket so there’s no mishaps with anybody coming in and turn the key
For a person that thought he knew everything i did not know about the flat spot for hitch clip rotation. Excellent tip as usual keep up the great work!
Thanks for watching!
I have watched other youtube channels on repairing this deck, but yours is far much better than the others. Thank you for uploading these videos
To the public I did not post this the way it came I will aplauigise for the way it sounded
You are the best mower poster on TH-cam, articulate and clear explanations. I can't tell you how much I appreciate your vids, thanks for all of your hard work putting these together and especially sharing your knowledge.
Thanks for the kind words Jim!
The guys @ lowes will sell you anything…clueless
Excellent video! You go into much more detail than others, and it is greatly appreciated.
Thank you!! This video helped me immensely! Now I know that that big knob adjusts the deck height. Well done!!!
Great video brother. I'm a veteran who really enjoys simple and direct instructions.
Your explanations were outstanding. You should have been a soldier. We need men who can train well and keep our young men squared away.
Thanks. I have to replace the belt for the first time on the same mower and this is a very big help.
Thank you for being clear & concise. I have an old GT6000 with a 50" deck, so yes more pulleys, arms, etc. My belt came off before completing my first mow this season & needed a refresher & a boost of inspiration to get back out there & pull the deck off. Once I get my first mow completed, I usually replace my blades. Again, taking the deck off. The deck weighs half of what I do, so kind of a bugger to muscle around. Lol. Great video & I appreciate your VERY helpful tips throughout.😊
very good video its has been over a year since i took off my deck and needed a refresher course Thank You again and I watch all your videos thumbs up again
Thanks for watching Robert!
This was a GREAT video!! My father and I found this very helpful and we are going to replace our belt this evening armed with your knowledge good sir! Please make more videos!! 👍 thanks again!
Thanks for watching, glad it helped!
Awesome job. My dad just broke the belt on his craftsman mower so now I know how to fix it. Much appreciated
Woah!!!! I never knew that about the flat/rounded edge for the pins! Thanks dude!
Thanks for watching!
Thanks man... been looking everywhere as to how the control rod for the blades works. Your explanation in the middle of the video was perfect. My attachment engagement levar is extremely difficult to press forward. I just put a new belt on and everything is good. Now that I know how the tension is applied I can give it a once over again.
I had a mower just like that, probably 1994, it was a beast lasted more then 20 years
Thank You’ll for information and advice
Very good job of explaining how to fix it the easy way if there is one
Excellent video,very well explanation and visual. This is the first video I have commented on. Thanks .
Thanks for watching Sal, glad it helped!
Fantastic video, the way you explain the mechanism by which everything operates e.g. how the blade engage rod provides tension adjustment to the belt helped me understand and therefore troubleshoot much better than any other video I have seen. Most other guys are like yeah pull out these pins and throw the belt on good luck. Yours is top notch. Keep it up.
My carb leaks🤔
@@buttliq0ur869 there's a Visine for that
The piece you see at 3:50 I believe you called an idler pully rod. (the up and down portion with the paddle and hole in the top is broken on my lawn mower. Where can I find that? It is almost the same model as you have in this video, except my starter and gears are on the right side next to the seat instead of the floor.
Never knew bout that flip clip! Thanks bro!!
Thanks for watching!
Appreciate you putting this together! Cheers
Almost identical setup to my old murry. Great vid 👍
Thanks for watching!
Great detailed video for replacing belt. I have this lawnmower and need to raise the deck, cuts to low in highest setting (6), do you have a video to explain process to get deck up, seems it doesn't allow the front to go up, just the rear. Thanks again.
Any chance that you have a video on doing the trans drive belt on this model?
really enjoyed this video. very well explained as usual. very easy to understand . thanks EP
Thanks for watching!
Thanks for the video-- do you know the belt size for the transmission? 1/2" by 95 is what I measured, but its stretched and damaged.. bought used with no info!
Thx bro i got almost the same cratfman its a damn war machine !!
I do Marine repair for a living and your video is excellent and very well thought out . The one thing I would recommend to everybody when you pull your deck is flip it over and check the blades . If they are worn or have huge nicks in them its easier to replace the blades while you got the deck out . I had to put in a standard black V belt in my deck because nobody in Elko nv has them I couldnt even order one and Homo Depot decided to eliminate half their mower parts and no long carry the belt for my deck they used to carry. Before there was two full long racks of belts now its down to half that and most of parts they had are gone. Had to go Ebarf and order the belt but I lucked out and got two for 30 plus tax free ship. Can you do a video on adjusting the tension? My pivot is threaded for my tension rod and you have to take it off to adjust the tension how can you get proper tension when you have to remove the pivot everytime? if they had just took the pivot and slid it on the rod with no threads with two jam nuts you could adjust it on the mower with the rod in place. Makes no sense 🤔
Thanks for all the good details!
Those spring clips aren't high-grade, unbendable spring steel. They are slightly malleable. You can bite them with some pliers and make them tight again. That one didn't open up because of age, wear, etc. It opened up because someone brute-forced it off last time they worked on it. Anyhow, really, REALLY thorough video. Well-done.
You are very thurali think the best you've helped me plenty of times Thank You Thank You Thank YOU. Stay cool this year lol as cool as you R
Great video, very detailed, to the blades below need to be in a certain position, will they contact each other when rotating?
No, that is what's referred to as "blade timing" and usually only needs to be done if you have a cogged belt
Do you know what is the Carburetor ( number that works for his Craftsman Riding Lawnmower?
Thank you for your time.
Hello , Is it possible to change the Blade Belt without taking the deck out? I am 74 and working on this in the yard so it's a little hard to pull the Deck out. If you see this soon please let me know. Thanks, Larry
I have a craftsman’s I had to take off the deck but the tensioner spring I can’t seem to see where it goes any more
I have the same tractor and my belt slips and or breaks
Thank you for the info
I know your busy but i have aQ do i need to change the rod on top of deck mower that i changed from a42 in. Deck to a38 in. Deck should it be changed. The belt is tight i think it should be less tension but idk could you tell meoh maybe youjust told me
Another great explanation 👍 well done
Thanks for watching!
Good day Jake Boy good video. My bro 18 craftsman would be like this. It has no brake on belt? Thanks
Hard to say, I'd have to see it to know. Thanks for watching!
@@EliminatorPerformance I meant your lawnmower. Thanks. Maybe they did not have it b ack then
What size of belt did you use
Thank you very much.
I have a similar mower , wish I would have seen this before changing my belt. I did manage to change it without dropping the blades.
Any hacks for a muffler on this model? I cant find the right size.
Mine comes out the left side, goes forward to the front and the round muffler aims downward at the end of the exhaust pipe. It's all one unit and a replacement is over $100! I went to a machine shop with the entire assembly and a screw on 12hp muffler from Lowe's. They made me an exhaust pipe assembly (cutting up the original one) with a threaded pipe aiming downward to accept my $7.00 muffler replacement. They charged me $20.00! Beats $100!
Good belt at a great price
You do NOT HAVE TO REMOVE BOTH ENDS OF THE HANGERS ON EACH SIDE!! I know because I have been working of the lawnmowers for about 20 years
How do you replace the drive belt on this mower
I have this lawnmower I have been looking for parts lists and diagrams to get parts for it can anyone help me
I would like to see how you replace the blade engagement cable on a Craftsman model #917.2880 31. There are several videos on how to do it but I'd like to see how YOU do it. I do have the cable and am about to try my hand at it. Just curious.
Thanks again.
Thanks for watching!
What size belt they take
This one is a 1/2"x88"
CANADA!! I got Maple Fever...
I have a lawn mower like that except it was a craftsman Ferrari model and I’m trying to find the price of the cost to sell it but can’t find it can y’all help me
Ask high
Settle low🤫😂😂
Dang, that’s the same exact mower I have but my deck only has 3 pulleys.
That’s the only thing I don’t like is dropping decks and moving them out of way
I can't use a rider that doesn't hack front and rear scalp wheels.
Hi excellent videos what I would say obviously you’re in a controlled environment but just for people trying to copy what you’re doing is put the key in their pocket so there’s no mishaps with anybody coming in and turn the key