Nice to see the Pace coming back together. So satisfying to feel no backlash and know you will have a reliable lathe to do your work. Thanks very much for sharing.
After watching one of your videos last winter, I bought a can of that CRC SP-350. Since I wasn't going to be using my mill and lathe for a few months over the summer, I wanted to spray them both down with it. Here a couple of weeks ago I went to clean them both off and put them back into service--that stuff is GREAT! It was still well-coated on all parts I had applied it to several months ago, and cleaned off easily with WD-40. Definitely made a believer out of me!
Thanx Adom , I've been jonesing for this next episode! I watch other TH-camrs and I must say that your close ups and camera work in general are outstanding. While watching others contend I find myself saying " Abom would have shown a fine close up right here ". Thanx , I've learned a lot watching you .Merry Christmas.
I have been following this very closely because I have a 16 inch American Pacemaker with the compound taken apart too. I am about ready to go put it together now! Thanks Adam, you are an inspiration.
As an absolute amateur in regard to working on industrial machinery, I recently completed the teardown/reassembly of a Bridgeport style mill... and I am so glad to see a number of the techniques in this video that I used in the process of completing my project. It helps me feel better that I (more or less accidentally) got it done right. 🙂
Adam, I think I’ve watched all your videos from working with motion industries to you first getting your home shop set up. From day one it’s been a pleasure watching you work. Top notch work without shortcuts as always. I appreciate a true American machinist !
So glad to see you working on the Pacemaker, Adam. I’ve been going back and enjoying all the great videos and memories related to the big Pacemakers, even to those first pictures on PM. What a fun history to go back and discover. (And it reveals what a hack I am for the way I’m impatiently going through my South Bend 14-1/2😊)
Machinery is a wonderful invention. Once it is all together the user has very little understanding of the internals. A few dials and away you go. It is very educational to see the mechanism from the engineer's point of view. Good job, Adam! Anyway, thanks for sharing! Stay healthy!
Adam, this rebuild has been a great project to watch and learn - I like that the final assembly is like a surgical procedure: super clean and precise. Nice!
Adam, I'm always amazed watching your videos..I really like watching machining on the old machine. I was worried about you getting into CNC stuff but that is going to be cool to... keep up the amazing video's
So much pleasure seeing this come together. It is obviously working smooth as glass with no lash. I love seeing how clever the engineers were who designed this cross slide.The set screw engaging the gib, which allows fine adjustments to the tightness of the slide, is wonderful.
I love precision machinery! There's an inherent beauty to precise things and this cross slide has that in spades! Wonderful piece of superbly designed tooling! Thanks for sharing! :)
thanks for sharing. took a few tries to get the proper time allotted to watch this weeks video. great fit and can only be done with experience and knowledge, always showing and talking us through it. thanks for your time.
I do believe the bearings should be double shielded, double sealed. The are open at bottom and are subject to contamination. Double sealed bearings are lubricated for ever in the type of use where little or slow rotation is the work.
Thanks for continually bringing us the best content, Adam. The American Pacemaker looks beautiful with each little piece you restore on that proud machine. I can’t wait to see what the new year brings as you move into working more and more with the latest CNC machines and the old-timers. Whatever it is, I’m here for it. Take care of yourself and Abby, and I hope you and your family have the best holidays. Much love from South Texas.
Hi Adam. We hear you are in for a huge storm. We hope you all are OK and your new shop roof is snow proof. All the best for a happy and peaceful Christmas. Bill B - UK.
I really enjoyed this video, much more like the ones you used to do from which I learned so much. Thank you. The only thing I would have done differently, me being a tad OCD hobby machinist, would have been to nickel electroplate the handwheel to stop it corroding from sweat in use, but I understand you're doing it for a job, unlike myself, so your time isn't free.
I'm refurbishing a big ass cool lookin vice right now, I'm busting all the rust and then I'm gonna paint it dark green. So stoked. I feel like I'm a big boy machine shop guy now 😎
Love the fixing up old stuff videos, must confess hadn't watched in a while because shiny, brand new stuff is so, well...boring? Like others I gotta throw in my "if it were me" comment, just to make conversation. Filler and paint would have been a must-do for me, same process as your vise restoration from a couple of years back. No easy direct tapered roller exchange for the 6201 dimensions, but a little side load won't kill those deep groove ball bearings in thrust for a long, long time. I forgot about the logo, at at a distance it looked like a lathe vise jaw print on the nut but it had been a while since watching the video where you made it and put your logo on. One question: Is there no lateral adjustment for the leadscrew nut? How does it compensate for lateral wear in the gibs over time? I think I would have wanted to machine the nut hole in the cross slide base to make it slotted and make the nut square so it had a few thousandths lateral movement. Float the nut in the slot and check for the thread binding at either end of the slide travel and when happy that it found the center of the screw up/down/left/right, cinch it down with a set screw from the front. I see a hole already drilled through the front of the cross slide base to lock in the nut.
just recently stripped, cleaned and re-assembled a small hobby mill that i got from my uncle, it has tapered gibs on the slides and I immedietly spotted the missing screw when you reinstalled the gib lol
Awesome job!! I wonder - you already went way in there and basically made it better than new! Any reason why you didn't try to make an adjustable nut (backlash adjustment)?? Of course as it is there is no backlash, but eventually it will develop...
G'day Adam... great video on the slide assembly, & the extra modification you had to do on the Lead Screw Nut. + I like the snug fit you gave it. I would have thought you might have adjusted the gib friction slide before assembly of the lead screw to get a finer gib adjustment. But each one to their own. Overall great video. Have a Great Christmas to You &Yours & a Very Prosperous New Year
Putting things back to OEM always makes the manual correct. My experience rebuilding count less industrial machines, we liked to use the xxxx 2RS bearings. They are sealed (rubber seal) on both (2) sides and do not need to be lubricated. One less failure point.
Compound Angles are still my hardest challenges. I'm studying and learning techniques... But I'm still frustrated. I wish there was a course that teaches this specific skill.
I am just glad you are going to fix the lathe and maybe use it. I don't know what you're planning for the shop with all the CNC machines and manual machines. You're running outta room to put much more into the shop. I for one am ready to see the chips fly and parts being made.
Imagine being the guy who worked with the machine for his worklife, seeing the love it gets by getting rebuild to continue to serve the next 80 years.
The machining world is lucky to have guys like you willing to put the time and effort into bringing these old machines back into service
I enjoy your videos, I not only learn new things but you have a terrific speaking voice, so it's a relaxing break in the day. Thanks Adam!
Organization is paramount to a proper working environment! Love your shop brother, Great Job!
As a guy who loves to take old stuff apart and put it back together better than new, this video series is a pleasure to watch.
I spy a new machine, still in the crate right by the rollup door! Merry Christmas Adam, Abby, and everyone!
4 lost lieutenants.
@@tankerboysabot Yes, but you always fail to mention they all found themselves and became Generals.😜
@@Bob_Adkinsor one lieutenant pointing north. 😂
Nice to see the Pace coming back together. So satisfying to feel no backlash and know you will have a reliable lathe to do your work. Thanks very much for sharing.
Nice to see the old lathe getting the love, new shop looks great !
Fantastic to see the Pacemaker Coming back together! Can't wait to see how the ABom puts it through its paces and makes it earn its keep!
The close-ups of installing those last three oilers were on the money! More of that style of photography would be awesome!
After watching one of your videos last winter, I bought a can of that CRC SP-350. Since I wasn't going to be using my mill and lathe for a few months over the summer, I wanted to spray them both down with it. Here a couple of weeks ago I went to clean them both off and put them back into service--that stuff is GREAT! It was still well-coated on all parts I had applied it to several months ago, and cleaned off easily with WD-40. Definitely made a believer out of me!
Thanx Adom , I've been jonesing for this next episode!
I watch other TH-camrs and I must say that your close ups and camera work in general are outstanding.
While watching others contend I find myself saying " Abom would have shown a fine close up right here ".
Thanx , I've learned a lot watching you .Merry Christmas.
I have been following this very closely because I have a 16 inch American Pacemaker with the compound taken apart too. I am about ready to go put it together now! Thanks Adam, you are an inspiration.
Nice, Looks good Adam. Looking forward to seeing the installation and testing.
Thanks for sharing.
"All i want for Christmas is to see some chips fly of the American Pacemaker" Merry Christmas to you and yours!!
Love videos like this. Thank you
As an absolute amateur in regard to working on industrial machinery, I recently completed the teardown/reassembly of a Bridgeport style mill... and I am so glad to see a number of the techniques in this video that I used in the process of completing my project. It helps me feel better that I (more or less accidentally) got it done right. 🙂
Great video Adam. Nobody does it better than you, thanks.
Incredible work Adam. You wouldn't find such sterile conditions in an operating theatre. Your attention to detail is second to none.
Looks really good Adam, you're happy is what really counts. Cheers Blessings. 🙏
Adam, I think I’ve watched all your videos from working with motion industries to you first getting your home shop set up. From day one it’s been a pleasure watching you work. Top notch work without shortcuts as always. I appreciate a true American machinist !
Absolutely fascinating, Adam, ...Thank you !
Nice video Adam :) nice to see the labor you put in the restoration of the lathe 😍
So glad to see you working on the Pacemaker, Adam. I’ve been going back and enjoying all the great videos and memories related to the big Pacemakers, even to those first pictures on PM. What a fun history to go back and discover. (And it reveals what a hack I am for the way I’m impatiently going through my South Bend 14-1/2😊)
I can't wait to see some chips flying off of the American Pacemaker!
i love the restoration/rebuild videos, even the general mainenance
Machinery is a wonderful invention. Once it is all together the user has very little understanding of the internals. A few dials and away you go. It is very educational to see the mechanism from the engineer's point of view. Good job, Adam! Anyway, thanks for sharing! Stay healthy!
Nothing like waking up on a Sunday morning to a new Abom vid, cheers and Merry Christmas to you and your family from us here in Australia mate.
Uhh it’s Saturday
@@jacknasty6940 Sunday in Australia!
@@jacknasty6940 We live in the future here in Australia.
Great job, Adam. Your dad and granddad would be proud!
I’m excited to see this on the lathe!
I love to see this back together.🙂
Best ASMR machining video ever made! Very relaxing. Thanks Adam!
Nice. Good thing you installed a belly in the new shop!
Videos just keep getting better. Thanks.
Adam, this rebuild has been a great project to watch and learn - I like that the final assembly is like a surgical procedure: super clean and precise. Nice!
It’s so nice to watch your machines with absolutely no runout whatsoever. Incredible precision.
Really enjoyed this video, seeing all of the parts come together. Anxious to see the next steps.
Adam, I'm always amazed watching your videos..I really like watching machining on the old machine. I was worried about you getting into CNC stuff but that is going to be cool to... keep up the amazing video's
Great job of rebuilding. I hate painting but I have found with my rebuilds that without paint it just isn’t done.
AtThe place where I spent most of my working years at had an American Pacemaker identical to yours. That is a very nice machine.
So much pleasure seeing this come together. It is obviously working smooth as glass with no lash. I love seeing how clever the engineers were who designed this cross slide.The set screw engaging the gib, which allows fine adjustments to the tightness of the slide, is wonderful.
Thanks for the video, happy Christmas to you and Abby and all your families 🎄🎅🏼🥃🥃🥂🍾💝
Excellent video. Thanks Adam.
Nice! I'm looking forward to seeing some chips on the American Pacemaker.
Go to his Facebook and you will see big, blue chips being cut!!
That fettled compound slide with all that TLC will be "as smooth as silk" when assembled.!
LOL at 28:25 or so I thought, man it just started bucketing down outside my window. Then I realized that was your fans or compressor.
Congrats! It's been a long road. Now if Keith can just get them darn helical gears cut the world will be saved. :)
Right!!! C'mon!! Lol
Dude, the background of your videos has made a drastic improvement!
I love precision machinery! There's an inherent beauty to precise things and this cross slide has that in spades!
Wonderful piece of superbly designed tooling!
Thanks for sharing! :)
Fantastic detail and information. I truly appreciate the excellent videos and continued variety of content. Thank you!
Been a long journey, no wonder you were excited to get it re-assrmbled👍👍(and yes, that flaking looks amazing)
So nice to see you getting back to good old school non-computerized all-American lathe maintenance.
Great to see the manual machines, want to see this one cutting metal.
That was great fun!! Thank you Adam!
thanks for sharing. took a few tries to get the proper time allotted to watch this weeks video. great fit and can only be done with experience and knowledge, always showing and talking us through it. thanks for your time.
I do believe the bearings should be double shielded, double sealed. The are open at bottom and are subject to contamination. Double sealed bearings are lubricated for ever in the type of use where little or slow rotation is the work.
I love watching, thank you for all of your time you've put into these videos
Thanks for teaching. I love to learn. And something as simple as improving my use of easy outs can save hours and headaches.
What a gorgeous compound
Flaking came out good Adam... you did a great job... 👍
Thanks for sharing Adam
Gota say I miss the old shop……….so much more homey.
Nice job!!!! Always a pleasure watching your work.
Camerawork always A class. Content always interesting. Merry Christmas to you and the Boss.
Thanks Adam .. all the best to U & Amy .
Abbie ;)
Great careful and thoughtful work.
Merry Christmas
Thanks for continually bringing us the best content, Adam. The American Pacemaker looks beautiful with each little piece you restore on that proud machine. I can’t wait to see what the new year brings as you move into working more and more with the latest CNC machines and the old-timers. Whatever it is, I’m here for it. Take care of yourself and Abby, and I hope you and your family have the best holidays. Much love from South Texas.
Love it. Been looking forward to this and getting the Pacemaker running. Nice job on that pin alignment...first time baby! 👍
i like the new shop, but really like that your making vidoes more like the ones you used to
Hi Adam. We hear you are in for a huge storm. We hope you all are OK and your new shop roof is snow proof. All the best for a happy and peaceful Christmas. Bill B - UK.
He’ll probably be ok given he is in Florida.
Would like to wish you and yours a VERRY MERRY CHRISTMAS
Hi Adam, thank you for bringing us along on these very interesting projects. Happy Holidays to you and Abbie.
Adam,
Amazon has quite a few brass ball oilers for sale. I am surprised you didn't look there.
Yeaaaaa! Here's hoping the American Pacemaker runs for another 80 years.
I really enjoyed this video, much more like the ones you used to do from which I learned so much. Thank you.
The only thing I would have done differently, me being a tad OCD hobby machinist, would have been to nickel electroplate the handwheel to stop it corroding from sweat in use, but I understand you're doing it for a job, unlike myself, so your time isn't free.
I wish you and your family Merry Christmas and a Happy New Year.
Love this video. So satisfying.
Yeah, I commented about he width of the nut a couple months ago when you first made it...
There was a reason it was made that way. :)
I'm refurbishing a big ass cool lookin vice right now, I'm busting all the rust and then I'm gonna paint it dark green. So stoked. I feel like I'm a big boy machine shop guy now 😎
The thing I like most about your videos is your meticulous patience for getting things just right.
Bravo Maestro !
Absolutely beautiful machine work. I wish you lived close by me. I would love to get a couple little things made.
Love the fixing up old stuff videos, must confess hadn't watched in a while because shiny, brand new stuff is so, well...boring? Like others I gotta throw in my "if it were me" comment, just to make conversation. Filler and paint would have been a must-do for me, same process as your vise restoration from a couple of years back. No easy direct tapered roller exchange for the 6201 dimensions, but a little side load won't kill those deep groove ball bearings in thrust for a long, long time. I forgot about the logo, at at a distance it looked like a lathe vise jaw print on the nut but it had been a while since watching the video where you made it and put your logo on. One question: Is there no lateral adjustment for the leadscrew nut? How does it compensate for lateral wear in the gibs over time? I think I would have wanted to machine the nut hole in the cross slide base to make it slotted and make the nut square so it had a few thousandths lateral movement. Float the nut in the slot and check for the thread binding at either end of the slide travel and when happy that it found the center of the screw up/down/left/right, cinch it down with a set screw from the front. I see a hole already drilled through the front of the cross slide base to lock in the nut.
just recently stripped, cleaned and re-assembled a small hobby mill that i got from my uncle, it has tapered gibs on the slides and I immedietly spotted the missing screw when you reinstalled the gib lol
ADAM, GREAT JOB, GREAT VIDEO, LOOKS GREAT...LET'S GO TO WORK...
Awesome job!!
I wonder - you already went way in there and basically made it better than new!
Any reason why you didn't try to make an adjustable nut (backlash adjustment)??
Of course as it is there is no backlash, but eventually it will develop...
G'day Adam... great video on the slide assembly, & the extra modification you had to do on the Lead Screw Nut. + I like the snug fit you gave it. I would have thought you might have adjusted the gib friction slide before assembly of the lead screw to get a finer gib adjustment. But each one to their own.
Overall great video.
Have a Great Christmas to You &Yours & a Very Prosperous New Year
Putting things back to OEM always makes the manual correct. My experience rebuilding count less industrial machines, we liked to use the xxxx 2RS bearings. They are sealed (rubber seal) on both (2) sides and do not need to be lubricated. One less failure point.
Looks better than new :-)
Cool project thanks
Ecxelente amigo, muy buen trabajo, te felicito. Saludos desde Colombia.
Enjoyed the video! Nice work 👍
Compound Angles are still my hardest challenges. I'm studying and learning techniques... But I'm still frustrated. I wish there was a course that teaches this specific skill.
Coming along well. Does the roll up door leak water underneath?
I am just glad you are going to fix the lathe and maybe use it. I don't know what you're planning for the shop with all the CNC machines and manual machines.
You're running outta room to put much more into the shop.
I for one am ready to see the chips fly and parts being made.
I think Adam's videos are of the highest quality and best content. I also think it is a shame that only 1 person in 8 gives a thumbs up.
Fantastic Adam!
Nicely done, Adam.
Thanks for sharing 👍
hi looks great but would look better with some grey paint on he cast part. keep on trucking
Beautiful work! We’ll done👍