My husband and I just replaced our Hayward S310T2 sand filter after watching your video. Thank you so much for posting this!! The install went off without a hitch.
Thank you Baby Jesus. Needed to confirm the connection method to the Filter, and you showed it perfectly. *IMPORTANT* Do NOT let the Primer DRY. Apply glue, while the primer is still wet. :)
🎯 Key Takeaways for quick navigation: 00:00 *🚧 Filter Assembly and Preparation* - Assemble the filter starting with the pressure gauge and ensuring the drain cap is secure. - Fill the tank with water, install the pipe and lateral assembly, and pour sand while protecting the laterals. - Ensure the central pipe is centered, lubricate the valve O-ring, and connect the multi-port control valve. 02:27 *🏗️ Connecting the Filter Components* - Rotate the laterals, add the sand shield, pour sand carefully, and level it without lifting the pipe. - Secure the valve with a clamp, connect the pump port, and create connections between the filter and pump ports. - Connect the return port, waste port, and tighten the multi-port valve flange clamp. 06:00 *🌊 Operating the Sand Filter* - Start the filter initially in the filter setting, backwash after a couple of hours, and rinse the pump. - Monitor the pressure gauge reading for the clean sand filter pressure. - Follow the proper steps for backwashing the filter and maintaining its operation. Made with HARPA AI
Absolutely right, primer doesn't only clean, it softens the PVC to assure a proper fit. Also using the proper glue is recommended (Christy's Red Hot Pool Pro) Aloha back to you braddah!
I thought that using elbows instead of bending a flex hose would create more water resistance and pressure. Was it just me because I would prefer pipe, elbows and unions..
You'd want to check with your local building codes to see if it is required. Many municipalities require that the equipment be bolted down in order to pass the final inspection on new builds. Most people prefer to bolt them down so they are not easily stolen, damaged in a strong wind storm, and to keep them from rattling.
I'm having trouble mounting the filter head to the sand barrel. the big clamp (with the two screw's) doesn't want to grab both the head and barrel . it seems like the channel on the clamp is too narrow. going Crazy. Any help out there !!!!!!
I always fill the filter with water half way before putting the sand it that way sand flows better and doesn't runt he risk of breaking anything. I also put 50 lbs of Pea gravel in the bottom first that helps with flow.
Inyo Pools I sure like sand filters I never understood why anyone would want a cartridge filter that has to be cleaned where I can turn a lever and water my plants for 5 minutes once every couple of months. I remember growing up my dad went with a DE filter we always had to refill it when we backwashed.
+kell490 Sand is so much easier over the lifetime of a pool; change the sand every 3-5 years, backwash whenever needed and you're done. Cartridge filters do have a better filtering capability15-20 microns to a sand filter's 40 microns. But most swimmers cannot tell the difference in water quality
Inyo Pools Sand filter is so nice my neighbors trees blow bunch of junk in 1 day I filter then I backwash the junk on to my lawn just before I run the lawn mower suck it up into that. My buddy has a cartridge filter combing hair and junk out of that what a chore plus the housing may leak after you it back together. I don't know why anyone would want something different I think those other filters are just something someone came up with to make money off of. Since I put in my new larger sand filter my pool is super clean drop little clarifier in. Glad you are not one of those guys that try to push cartridge filters. I had 1 pool contractor tell me how they cleaned %50 better.
I have a old 1 speed 3 hp 1996 challenger and the motor need replacement . Is it wise to buy a 2 speed motor to replace the one speed motor for energy saving when I just want to circulate my chemicals in the water???? BTW. I have an 8 jet spa and when valved off the spa has one separate jet that acts as a pool a overflow water fall while the pool is in valved for circulation and skimming. I also have a return separately valved for my polaris pressure side cleaner that i run as needed . In this 15000 gallon pool with a 10 person spa.
I'd highly recommend that you downsize to a 1hp variable speed motor/pump setup. 3hp is wasting money in electricity for that small of a pool. The challenger pump is also a dated design.
+Sara Davis Waste ports normally do not require unions. In a standard installation, the blue vinyl waste hose would be fitted directly to the multiport valve. To be honest, the line set-up in the video with a hard pipe extension on the waste line is a not overly common.
So when attaching the pipes to your valve on top of the filter no thread dope Or teflon tape is needed to prevent leaks? I have to replace my valve ( over tightened and cracked) and someone told me put blue block on the threads.
We're not pond professionals, but it is my understanding that a sand filter can be used. However, it is not the ideal choice. The problem is that a pool sand filter traps very small elements in order to keep a pool crystal clear. A pond is a lot more messy and the sand filter will fill up quick. This means it may need to be backwashed daily.
@@Inyopools Do you sell a product that will bypass excess pressure around the filter? E.g. 2" pipe with an adjustment spring that collapses as pressure builds, eventually bypassing pressure over the threshold?
Have you ever heard of people putting pebbles the size of pees for the first 6 inches then coarse sand about 4.75mm for the next 6 inches then medium sand 2.0 mm for the last 6 inches in your pool filter? Does this have any benefits?
where is best place to buy sand filter and pump for a pool like this....we have a 22,000 gallon pool - inground what is best size sand filter for a pool this size?
Brad Ellender A pool that size should likely have a sand filter of 24" or wider. Remember it is best to oversize a filter to minimize need for cleaning and maintenance. We can ship you a sand filter of your choice. Review this link for our selection of sand filters: www.inyopools.com/search_sand_filters.aspx
Riyadh Master The filter only needs to be replaced if your current filter is broken or old. Generally, the sand should be replaced every 5-7 years, or according to need.
My husband and I just replaced our Hayward S310T2 sand filter after watching your video. Thank you so much for posting this!! The install went off without a hitch.
Awesome!
So details,thank you for all information I need to build the said sand filter tank
Glad to help
Thank you Baby Jesus. Needed to confirm the connection method to the Filter, and you showed it perfectly. *IMPORTANT* Do NOT let the Primer DRY. Apply glue, while the primer is still wet. :)
Just bought a replacement filter and this video is incredibly helpful.
Thank you!
Best video on the internet!
Thanks, to install new sand filter
Great video helped me alot!
Is it ok to fill the tank with water after the sand is added.. then do the backwash?
Excellent video. All the information needed, and nothing you don't. Perfect!
I appreciate that!
Awesome video. Thanks guys.
Good explanation
Thank you from Czech rep. ;)
Excellent video! Thanks so much
19KILO104 Thank you for watching! Glad to help.
🎯 Key Takeaways for quick navigation:
00:00 *🚧 Filter Assembly and Preparation*
- Assemble the filter starting with the pressure gauge and ensuring the drain cap is secure.
- Fill the tank with water, install the pipe and lateral assembly, and pour sand while protecting the laterals.
- Ensure the central pipe is centered, lubricate the valve O-ring, and connect the multi-port control valve.
02:27 *🏗️ Connecting the Filter Components*
- Rotate the laterals, add the sand shield, pour sand carefully, and level it without lifting the pipe.
- Secure the valve with a clamp, connect the pump port, and create connections between the filter and pump ports.
- Connect the return port, waste port, and tighten the multi-port valve flange clamp.
06:00 *🌊 Operating the Sand Filter*
- Start the filter initially in the filter setting, backwash after a couple of hours, and rinse the pump.
- Monitor the pressure gauge reading for the clean sand filter pressure.
- Follow the proper steps for backwashing the filter and maintaining its operation.
Made with HARPA AI
No sealant?
Great video! Thanks!
Juan Su Thank you
I get this is old, but why is the union from the link different from the one used in the video?
was there a rubber gasket on the top pump when you put it in?
Critical Mistake: “Let primer dry”. The primer has to be wet for the PVC glue to be effective. You’re welcome. Aloha!
Absolutely right, primer doesn't only clean, it softens the PVC to assure a proper fit. Also using the proper glue is recommended (Christy's Red Hot Pool Pro) Aloha back to you braddah!
¡Muy excelente!. ¡Muchas gracias!
Such a great video thank you
I thought that using elbows instead of bending a flex hose would create more water resistance and pressure. Was it just me because I would prefer pipe, elbows and unions..
So the filter just sits on the ground? You don't have to anchor it down or anything?
You'd want to check with your local building codes to see if it is required. Many municipalities require that the equipment be bolted down in order to pass the final inspection on new builds. Most people prefer to bolt them down so they are not easily stolen, damaged in a strong wind storm, and to keep them from rattling.
Is this a 2 inch pipe?
I'm having trouble mounting the filter head to the sand barrel. the big clamp (with the two screw's) doesn't want to grab both the head and barrel . it seems like the channel on the clamp is too narrow.
going Crazy. Any help out there !!!!!!
Did you get it to work? Having this issue now
I always fill the filter with water half way before putting the sand it that way sand flows better and doesn't runt he risk of breaking anything. I also put 50 lbs of Pea gravel in the bottom first that helps with flow.
kell490 both very good ideas when filling your tank. The water does a great job of diffusing the force of sand to prevent broken laterals.
Inyo Pools I sure like sand filters I never understood why anyone would want a cartridge filter that has to be cleaned where I can turn a lever and water my plants for 5 minutes once every couple of months. I remember growing up my dad went with a DE filter we always had to refill it when we backwashed.
+kell490 Sand is so much easier over the lifetime of a pool; change the sand every 3-5 years, backwash whenever needed and you're done. Cartridge filters do have a better filtering capability15-20 microns to a sand filter's 40 microns. But most swimmers cannot tell the difference in water quality
Inyo Pools Sand filter is so nice my neighbors trees blow bunch of junk in 1 day I filter then I backwash the junk on to my lawn just before I run the lawn mower suck it up into that. My buddy has a cartridge filter combing hair and junk out of that what a chore plus the housing may leak after you it back together. I don't know why anyone would want something different I think those other filters are just something someone came up with to make money off of. Since I put in my new larger sand filter my pool is super clean drop little clarifier in. Glad you are not one of those guys that try to push cartridge filters. I had 1 pool contractor tell me how they cleaned %50 better.
I have a old 1 speed 3 hp 1996 challenger and the motor need replacement . Is it wise to buy a 2 speed motor to replace the one speed motor for energy saving when I just want to circulate my chemicals in the water???? BTW. I have an 8 jet spa and when valved off the spa has one separate jet that acts as a pool a overflow water fall while the pool is in valved for circulation and skimming. I also have a return separately valved for my polaris pressure side cleaner that i run as needed . In this 15000 gallon pool with a 10 person spa.
I'd highly recommend that you downsize to a 1hp variable speed motor/pump setup. 3hp is wasting money in electricity for that small of a pool. The challenger pump is also a dated design.
Damn, how about that bass drop in the intro..........
so this pumps take sand and salt or only salt or only sand?
asr 01 This filter uses sand to sift your water, but you can use a salt chlorinate generator to chlorinate your water.
in Step 18...why do you not install a union there too?
+Sara Davis Waste ports normally do not require unions. In a standard installation, the blue vinyl waste hose would be fitted directly to the multiport valve. To be honest, the line set-up in the video with a hard pipe extension on the waste line is a not overly common.
So when attaching the pipes to your valve on top of the filter no thread dope
Or teflon tape is needed to prevent leaks? I have to replace my valve ( over tightened and cracked) and someone told me put blue block on the threads.
I suggest using a couple turns of teflon tape to keep threads securely in place.
Can you use a sand filter for a pond or will bacterial growth plug it up?
We're not pond professionals, but it is my understanding that a sand filter can be used. However, it is not the ideal choice. The problem is that a pool sand filter traps very small elements in order to keep a pool crystal clear. A pond is a lot more messy and the sand filter will fill up quick. This means it may need to be backwashed daily.
@@Inyopools Do you sell a product that will bypass excess pressure around the filter?
E.g. 2" pipe with an adjustment spring that collapses as pressure builds, eventually bypassing pressure over the threshold?
Have you ever heard of people putting pebbles the size of pees for the first 6 inches then coarse sand about 4.75mm for the next 6 inches then medium sand 2.0 mm for the last 6 inches in your pool filter? Does this have any benefits?
Great video! One question. How do you prime the pump?
We cover how to prime a pump on the following link: th-cam.com/video/aC1KGJ3Qoh8/w-d-xo.html
wow
where is best place to buy sand filter and pump for a pool like this....we have a 22,000 gallon pool - inground
what is best size sand filter for a pool this size?
Brad Ellender A pool that size should likely have a sand filter of 24" or wider. Remember it is best to oversize a filter to minimize need for cleaning and maintenance.
We can ship you a sand filter of your choice. Review this link for our selection of sand filters: www.inyopools.com/search_sand_filters.aspx
What size PVC is that?
This video is a few years old, but I believe it was 1.5" PVC.
What is the pipe type that you are using?
And was it bought at Lowes, Home Depot, or somewhere else?
how much pressure does this sand filter requires for allowing the water to flow through it?
+Diwakar Dey manufacturers do not list a minimum flow rate but the further you dip under a filter's design flow rate the better the filtration.
+Inyo Pools hey can u help me to join or can find any company, who can use my water purification method ???!
No more than 40psi. For most pool filters.
I have to do same every year?for3years since I got a swimming pool never do😱😱
Riyadh Master The filter only needs to be replaced if your current filter is broken or old. Generally, the sand should be replaced every 5-7 years, or according to need.
What size Union did you use? Also what name and part number?
The unions can be basic 1.5 or 2-inch unions that you find at a plumbing store, or the filter may well come with a set.
Obama
the guy installing this is clearly and alcoholic....those hand shakes.....