Pentair SUPERFLO® VS (VST) Variable Speed Pump Operating and Programming
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- The Pentair SuperFlo VS Variable Speed pump is very easy to program and set up. Pentair has gone to great lengths to make this pump as user friendly as possible. The programming that I show is based on the pump not being connected to an automated system like the IntelliTouch or EasyTouch, for that set-up you will need an External Control Wiring Kit.
I think most consumers will be using this pump as a stand alone and the video will cover the programming of the pump. The Control panel as been simplified for easy set-up so the first thing you will need to do once the power is on to the pump is set the clock. Simply press the “Display” button for 3 seconds and then use the “+” or “-” to set the clock to a 12 hour or 24 hour time format. Then hit the
“+” or “-” to scroll the time up and down. Hit “Display” again to lock in the time you set.
The pump comes with a pre-set default programmed run time:
SPEED 1 runs for 2 hours at 3000 RPM
SPEED 2 runs for 10 hours at 1400 RPM
SPEED 3 runs for 2 hours at 2200 RPM
You can just use the default run time or simply program one of your own. One thing to note and it is important: the pump will not run at all unless you hit the “Start, Stop” button. You will see a green LED light once the pump is turned on by hitting the “Start, Stop” button. Just remember that after initial set-up.
Also not that each SPEED button must have a program run time. If you only want to run 2 speeds, simply set one of the three SPEED buttons to 0 RPM. Just use the “-” button until the RPM zeros out on that button. IT doesn't matter if that SPEED has a run duration, at 0 RPM it will not engage.
To enter a Custom Schedule make sure the “Start/Stop” button is not illuminated. Now you can program each button by pressing it once. For example:
Hit SPEED 1 “1” button, the LED will blink - now use the “+” and “-” button to set the RPM. Press the button “1” again and now you can set the start time of SPEED 1. Use the “+” and “-”
Press “1” button again and now you can set the run duration - use the “+” and “-” button to set the run duration.
You would simple repeat this process for SPEED 2, SPEED 3 and the “Quick Clean” button.
The “Quick Clean” button is used as a “Time Out” button found on other Variable Speed pumps. By hitting this button you override any program set time and if the pump is off, it will turn on. You can set the “Quick Clean” button to any speed and duration but I recommend 3450 RPM for 3 hours. This is a good button to press when you add chemicals to your pool or when you want to use your attached spa. The 3450 RPM is the pumps full 1 ½ HP speed.
I also touch on using the FlowVis Flow Meter to set your pumps run time specifically for one cycle of water. Using a flow meter like the FlowVis will allow you to set your pumps run time exactly in
FlowVis® Flow Meter Retrofit Kit Installation Guide: • FlowVis® Flow Meter Re... order to maximize your energy savings. Without a flow meter you are really just guessing when you set your Variable Speed pump. So I highly recommend installing one when you purchase the pump.
Related Videos:
SUPERFLO® VS Variable Speed Pump - Overview & Features: • Pentair SUPERFLO® VS V...
SUPERFLO® VS Variable Speed Pump: Plumbing in the Pump: • How to Install a Penta...
SUPERFLO® VS Variable Speed Pump Wiring and Electrical:
• How to Wire a Pentair ...
FlowVis® Flow Meter - H2flow Review & Overview: • FlowVis® Flow Meter - ...
FlowVis® Flow Meter - Plumbing in the Complete Valve: • FlowVis® Flow Meter - ...
FlowVis Flow Meter to Set Your Pool Pump Run Time: • Using a FlowVis Flow M...
This video was extremely helpful!...I just got this pump installed and I didn't know how to program it..this saves alot of money! Thanks
So my 10 year old AO smith pump went out the other day and I needed a variable speed pump immediately because my pool was very green. I went to pool stores etc and no one could help me for about two weeks, so I went online, purchased the Pentair Superflo vs. The pump arrived two days later from Amazon (free shipping). I installed the new pump with new plumbing and electrical in two days. TOTAL COST of Pump/Plumbing & Electrical was $769. This was a $500 savings. I would not have done it without David's tips on installation. KUDOS TO DAVID!!!
Your very welcome. Thanks for the great feedback! 👍
😅t
I installed one of these at my house earlier today. Your video made programming a snap, thank you!
Thanks for the great feedback. It is a really good pump. 👍👍
Installed this pump along with the Flowvis. Surprisingly using your settings I'm getting 50 GPM at program 1 and 20 GPM at program 2 with the Skimmer and Kreepy on. With the Main Drain and Skimmer it's much more GPM and 95 GPM in the Quick Clean mode.
The Flowvis really takes the guessing out of how long you should run your pump for a full cycle 👍
Thanks for the update! The FlowVis is essential. Now you will really be saving on your energy bill. 🤑
Thank you so much! It’s surprising that the manual doesn’t explain the programming process very clearly, so your demonstration was super helpful.
Thanks for the video- I was able to reprogram 2 pumps after someone installed them and set the filter to run 24hrs at 3450rpm and the Infloor pump for 16hrs at 3150rpm. I had to work fast as more than 6 mosquitoes were trying to get my legs!
LOL - 😆
I appreciate your videos I'm just starting a pool route next week it is new to me. I have been spraying Lawns for 15 years and now im moving to pools
Good move. Pool Service is loads of fun ;).
Thank you for putting the pool pump setup instruction. I just wanted you to know that how much I appreciate it.
Thank you very much! I do have a pool guy, but he does not come for several days and we are just recovering from hurricane Ian and the power wiped out the programming. It’s all set to go. Thanks to you.!
Stay safe!
Thankyou you saved me 3 times now from power outages I really appreciate your video cheers mate!!!👍👍💪
It Has To Be Reprogrammed After Power Outages? The Power Grid In Florida Is Shaky at Best and We Are In The US LIGHTNING ⚡️ Capital Here In Tampa Bay...
Seems Like More To Go Wrong In This Florida Heat 🔥 The Motor Will Still Wear Out, Is It Easily Replaceable/Serviceable With That Mounting and Motor Controller Or... YOUandMeRealty.com
I use this video every year when opening the pool. I leave it on Lee setting all fall and winter the program for late spring and summer fun.
I was about to say the same thing. Please don't delete this video 😂. For the past 5 years this my to go to
Excellent video which help me to instruct my technician how to set up the RPM and time according to my pool size. He was going to set it up for longer hours that my size pool didn't need. Your video help a lot. Thanks.
Thank you. This was very helpful and concise. Pentair should put a link to you video in the user guide :>)
Every time the pool company gets a new cleaner they tell me my Superflow VS pump is broken and I have to show them your video. Thanks!
I appreciate your videos I'm just starting a pool route next week it is new to me I burn been spraying Lawns for 15 years and now im moving to pools
thank you for this, just bought this pump for the energy savings and your video made programming a snap.
Hi David, thanks you have the best instructies video on youtube! Greetings from the Netherlands!
Thx for another informative video David. When I need to sharpen my knowledge I turn to your videos 👍
Thanks Bill! 👍
Thanks , your videos helped me install my new Pentair VS!
Thankyou you saved me a lot of time and frustration!!!👍👍💪
Again it's been a long time but thank you for the videos
Very helpful. Thanks for creating this content and your other great videos.
Thanks. I needed something easy to follow. I appreciate it.
Thankyou very much saved me big time on your videos!!!👍👍💪
Thank you for video. Very informative, made it easy for me to configure.
I noticed after I turn it back on that it says, "Prime" flashing, and it's a lower speed than what was set.
This was every helpful thank you you saved me money and waste of time
Good video easy to follow steps and clear. Thank you for the help.
hugely helpful thank you
Just bought this pump. Thanks for the setup info.
Nice. It is a great pump. 👍
Great video, I don't use a pool guy ever since I went to salt. So they would have charged me to come out to reprogram my pool pump. Had a power outage for a few days during a storm and pump lost its memory somehow. So this video is perfect exactly what I needed. Thank you!
Very very helpful! Thank you so much!
Great video💪🏼
Excellent explaining
Thanks David very helpful.
So after using quick clean to vacuum will it default back to options 1 2 or 3 depending on schedule, automatically?
yes
Thanks, just picked up a green clean with this pump👍
Thank you very much for the easy-to-follow instructions. I live in So California. Right now the pump is set at Speed 1(3000) for 2 hours, Speed 2 (1650) for 8 hours & zero for Speed 3. Should I make some adjustments in view of the hot weather?
Yes, Increase speed one by 4 hours to run it 6 hrs at 2800 RPM
@@SPL You recommend running it for 14 hours a day in summer in California (100 degree temps)? Just had one installed yesterday.
How do you backwash the pool when the pump is shut down?
Thank you so much for your prompt advice!
Your videos are super helpful. I bought a house with the Pentair system. I’m learning how to use it thanks to you.
Question. I understand how to set the system but what changes should I make for the weather. How long should I run the filter and at what speed for 90 degree weather and what speed for 70 degree weather?
I would cut the run time exactly in half from Winter and Summer to make things easy. Glad you found my videos helpful! 👍
Thanks for the video!
I have a salt system pool and just had this pump installed on friday. The tech set it at Set1 2200 rpm for 6hours (12am-6AM), set 2 is 2700 RPM for 14 hours(6AM-8P) nd set 3 is set for 3000RPM (8PM-12PM). Is it me or does this seem like the system would be using more electric than doing me good? They did say that the Pentair should really be running for 24 hours a day rather than powering off for so many hours a day Please advise if i should manually adjust the RPM's.
also wanted to add my pool is 10,000 gallons
Would set it for 8-10 hours at 1800 RPM. Then 6 hours at 2200 RPM.
You the BEST!!!!
Made that simple thank you
Great instruction and clear details. What does the "External Control Only" feature do? Does it ignore this schedule you programmed? Can the pump run the schedule and receive an override from an external controller?
It is an option if you have an automated system connected to your pool equipment. The Automated system like a Pentair Easy Touch will override the pump panel and you would run it from the Easy Touch.
Does anyone know what happens if a signal for speed 2 is being sent and another signal is sent for speed 3? Will the most recent signal win or will it give an error code? When signal for speed 3 drops, does it resume speed 2 from the signal which has stayed on?
@@SPL my "ext.control only" is lit up, how do i turn it off ? i cant operate the pump with it on, its seems
David i have a goldline hayward controller board inside the house for my single stage pool pump as a timer which allows me to turn the pump on and off as needed. i am thinking about changing my pump to this pentair superflo pump but i am confused how would i be able to integrate the control with my existing controller? any advise? ill appreciate it
It would be best to go with a Hayward VS pump so that the communication is flawless. The Superflo VS was primarily designed as a stand alond pump without automation. Even connected to Pentair automation it is limited. The Hayward Super Pump VS 700 230/115V (Expert Line) Item # SP2670020VSP. This VS pump is comparable to the Pentair Superflo VS. It is only sold at retail pool outlets and not online. They come with a 3-year warranty. If your going for the Superflo because your pool equipment is 115V you can also get the straight 115V model: Super Pump VS 700 115V (Expert Line)
Item # SP2670010VSP
Hey man just wanted to thank you for taking the time and putting in the effort to making all these video's for the community! They have been EXTREMELY helpful and very informative! You have taught me a lot! Quick question though! I just got my pool re-plastered! Went with Midnight Blue pebble bottom, do you have any video's on how to/what to do with a fresh water fill? Thanks in advance! +1! Subscribed!
I do have some start up videos. You plaster co. should do that for you.
Acid Start Up for White & Colored
Plaster Pools Step by Step - Part one of two:
th-cam.com/video/spbT1KZYpcQ/w-d-xo.html
Acid Start up -How to bringing the pH
and TA up - Part two of two: th-cam.com/video/CaHMwyNA5-w/w-d-xo.html
Very helpful thank you
Thank you. Big help.
Great help thank you
I have this exact setup. But I put the flow vision after the filter. Also why do you need to have the high rpms for 3 hrs? Why can't you just leave it on low rpms all day?
You can leave it on low all day but this pool has an automatic cleaner and it needs some run time on high speed to operate. Also, just on low speed all day you will notice that the pool gets pretty dirty unless it is screened in. The skimmer works best when running on a higher speed for a couple of hours a day.
Oh ok. If the pool cleaner runs with a Booster pump would you still need high rpms?
Yes, the booster pump needs the VS pump to be at around 1800 RPM to move the pressure cleaner effectively.
Is there a specific reason why you choose 40 and 15 gpm? Sorry for the trouble
Not really. I like a good flow during high speed so the surface gets skimmed. You can set the high speed lower if you like. I wouldn't set the low speed much lower.
Thank you so much
I have programmed my pump but it is not running the program. The start button is on but the display just reads 0. Any thoughts?
Thanks for this. Is there a maximum RPM that should be used during the longest part of the day? I have a small pool (4500gallon), but my heater needs a higher water pressure to run. Wondering what the max is without burning out the motor.
Max is 3450 RPM and it won't damage the motor.
Thank you sir
I just had this pump installed and am having trouble trying to start it several hours after it ran cycle to heat a built in Jacuzzi. Hos do I start the pump running manually?
Thank you
Thanks!
What would be the speed the pump needs to run order to use the heater? I have a RayPack new heater. I understand a certain speed is needed for the heater to work. I haven't used it yet (heater), just had the pump installed a few days ago. Thanks for any advice.
I beleive the lowest RPM for that heater model is 1800 RPM. I prefer to run it at 2800 RMP or even the full 3450 RPM for a short time to heat up the pool or spa.
Thanks for your response. I asked the pool company, they say 28K RPM would be okay. It is raining today in DC, will give it a try by the weekend. But second question would be: what would be the benefit of a variable pump if the heater needs a specific RPM in order to run properly? Thanks again.
Thanks. From your reply I guess that the whole idea of a 'variable pump' looses its meaning, right? I.e. a specific speed is needed for the heater to run.
David how many gallons is that pool you just set up with those run speeds?
About 17K Gallons
Perfect... solved my problem today..!!! However.. What does ALARM mean on the pump which I saw today and shut off the power to reboot. ???
Just means pump lost prime. Usually air in the pump basket area causes this
i read that to turn the "external control only" light off, i should hold the start/stop button until it turns off.....but ive done this and.....NADA, still lit up, pls help
I set the time and adjustments I wanted. It didn't start at 10am as I programmed by itself. Do I must hit start at 10am every morning for it to run on my settings
?
No. If the pump is on and you hit start after programming it should run at that time. Check the AM/PM as I have set it wrong myself.
Another Excellent informative video Thanks! Anyone deal with this pump That has harsh winters? wondering how the electronics fair sitting in freezing cold weather for 6 months a year. (winterized of course).
Hi is there anyway to contact you I have a couple questions about running this pump when weekly shocking my pool
like watching your vids they have help me out!
but I need your help.. I have this customer with a star rite super max.. The problem he is having is that all led lights are on (solid) but nothing showings on the screen. And it wont turn on. First time I see this.. can you help
Maybe screen is dead. Pretty expensive part.
thank you
I have Lights and screen works as well, But It will not turn on at all,..It was working flawless at bed time last night
Stupid questions from a new pool owner here (21,000 gal vinyl):
-would programming the time matter if pump is attached to Intermatic timer since it will cut the power at certain time anyway?
-when it first cranks up, it goes to prime, then speed 1 (let's say set for 2 hrs), then speed 2 (X how many hours)?
-follow up to question 2, how long should I run the pump for each speed for a day? I heard it depends on the season/temp.
TIA
Take off the intermatic on/off trippers and leave that on. That will solve the first issue of it turning off the VS pump. For your size pool I would set it on low speed for 12 hours in the Summer- 1700 RPM and then a medium speed of 2300 RPM for about 4-5 hours each day. That sounds like a long time but the energy use is about 2 hours of a standard pump.
Thank you for this. Quick question though? If we want the pool to be heated with this pump doesn’t it have to run at 3000 RPM or above?
It doesn't need to but it will take longer to heat on a lower RPM
Perfect
My pump doesn't turn on automatically. I will have to hit the program 1 button so it can start. Do I have to have the power to the pump on 24/7? I have my control panel set up to give power to the pump at the time a programmed to start. Any help will be appreciated.
Keep power to the pump 24/7. That is likely the issue.
@@SPL Fixed the issue once I hit the start button. I had pushed the stop button once and left it like that thinking it will start the next day. The pump doesn't need power 24/7. Thanks
I service the Pool at the Days Inn Motel,..It has been running flawless for about a week also just installed about a week ago,..This morning it isnt working at all,..I have lights but it will not turn on at all,..I tried the hard reset by holding the 1,2,3, and Clean at the same time for 4 seconds and still nothing,..Please Help we closed pool until fixed
Any error codes?
I sure would like to know the answer to a couple very basic question about this pump. Are you still available?
Yes, they still sell this but in the new upgraded version.
Any concerns running the pump at night? Trying to be energy efficient We are on time of use so 8pm is optimal.
No issues with running this pump at night.
so cool
Can this be controlled via a smartphone or Alexa?
Great video! Is it possible to program this pump with an app? The Pentair Home app doesn't list the VST as an available pump to add.
I don't think it is compatible at this point.
is there anything I need to do to this pump if I drained my pool in preparation for getting a new liner later this season? I had leaks all over my stairs on my vinyl liner from my dogs claws so im going to replace the liner. I drained the pool in the meantime but there is still some water inside the sight glass of the pump and it's starting to turn greenish. Should I have drained that water out before storing for a couple months not in use?
Would say a good dosing of chlorine once filled will cure everything.
I have the same system that you are programming. Is there a way for the pump to stay off a certain amount of hours during the day? And how do I program the pump for a 30000 gallon pool. Like how should i run it.
For that size pool the builder should have put a 3 hp Inteliflo VS on it. Would run this at 3100 RPM for 14 hours and then 2100 RPM for 7 hours.
You show a graphic at 5:25 with a 14,000-gallon pool and a program that filtrates/circulates 14,400 gallons per day... I have seen videos claiming that pool owners should run the pump for double the size of the water since the water isn't just lining up by the skimmer to be filtered. True or False? Is, therefore, programming the pump for daily filtration equal to 1 times the size of the pool adequate?
There are those who believe this. I will have to look into it more myself but this last year or so I have heard the same thing.
When I touch the superflo vs pump start and any button on that black pad I get electrocuted is this serious or can I continue to use plastic gloves when touching it?
Probably not grounded correctly. There should be a copper bonding wire attached to the pump.
@@SPL when I turn off the breakers and the time clock I still get electrocuted. This pump doesn't have a heater what should I attach the bonding wire too?
Great Video, I followed your programming advice. However when I turn on the pump the RPM doesn't read what I set it at. Any thoughts on what I'm doing wrong. The pump seems to run fine. I don't see the watt light ever light up in any mode. When you go through the programming part does it automatically delete the previous program that was turning on the pump ect. Thanks in advance.
The best thing you can do is to call Pentair Tech support while you are out there by the pump. That way you can tell them what is on the screen at them moment. It is hard do troubleshoot it if you are not directly at the pump. Expect a long hold time unless you call early AM - 800-831-7133
question-after pool company installed Superflo VST on 6/13/22 we had reverse flow when we would clean the filter basket of the new pump. Tech added closing multiport (which we have never had to touch for 14 years unless backwashing) we set pump for 12 hours at 3k. Sunday 6/26/22 (13. days after installation of new pump) our system exploded. Pool co claims no responsibility. Others think foul play-we know because of security cameras-there was no foul play. All our valves were opened. Any thoughts on the reverse flow causing a build up in pressure enough to explode pipes? I hav tons of pictures and video-tomorrow the system will be taken apart and pipes will be replaced to try to uncover the mystery.
Maybe the inlet and outlet were plumbed wrong. That is all I can think of.
hi i wrote from indonesia, i just built a swimming pool size: 53ft x 9 x 5 deep = 16'200 gallon.
my size pipe are all 1,5 inch.
here they sell the intelliflo vs or superflo vs.
the filter here are ta60,ta100 or sd80.
i'm little bit confused on which is it the best pump and of course filter i have to buy.
please help me. hope to hear you soon
Hi Everyone my Pentair Pump is locked into exteririor control only how can I set it back to controling from the display?
I live in north bay of San Francisco. I want to maximize the lower electricity rates during the overnight hours. Is it ok to have highest rpm’s running overnight, then lower rpm’s during the day? Just wondering if higher rpm’s need to be during hotter sunny part of the daytime? Thanks
That should work on fine. At 1800 RPM during the day that will be enough to keep the water moving.
This video is great! I have a 12k gallon pool. I live in AZ, for the heat should I be running 12 hours per day or is that overkill? Also is speed 1: 3000rpm for 3 hours then speed 2: 2000rpm for 6 hours then speed 3: 1400rpm for 3 hours ok?
I would set it to run for 12 hours at 1800 RPM (165 watts per hour) and then 4 hours at 2400 RPM as long as you don't have a cleaner. This will give you maximum energy savings. If you have a cleaner set it for 2600 RPM for 3 hours. This is roughly equivalent energy wise as 2 hours of run time on a 1.5 hp standard speed pump. So you can imagine the energy savings.
@@SPL Thank you. I forgot to mention I'm on a utility package. I save by not running during 3pm to 6pm Monday-Friday. What would you suggest in that case?
I have a rebel vaccum as well and the pool is probably actually closer to 10k gallons. I just bought this house so I'm learning lol.
In general, is this your common schedule for most pools? 3 hour morning high run followed by 8 hour slow run? Thanks
8-10 hours on a low speed like 1800 RPM and then 4-5 hours at 2400-2600 RPM. Depending on the pool size. But nothing on high speed at all really.
Your Vedic is very helpful! The screen recently doesn’t show, that makes me unable to adjust it and program it! Any tips?
Check the wire inside to see if it has come loose. Easy to do. Just unscrew the screen and you will see the wires under it.
@@SPL thank you so much for your quick reply! I’ll try this and hope it works.
So... After in install and program it, I assume I turn on the intermatic timer and remove the Off trippers... right?
Yes. Correct.
Great Video , Thank you ,
How can we rest the programing ?
hold 1-2-3-Quickclean down for 3 seconds all at the same time to factory reset.
I'm looking to purchase a variable speed pump. My pool is 24,000 gallons. Right now I have a 1.5 hp pump that I run from 6:30 am to around 1:00 pm. So it runs about 6.5 hours. How does a variable speed pump save money if you have to run it longer? Is it because you are running it when electricity is cheaper? It makes sense that it would save money because it uses less electricity at lower speeds, but if you have to run it longer, doesn't it use as much electricity?
My Blog post explains it pretty clearly for you. Great question. poolmandave.blogspot.com/2016/10/benefits-of-variable-speed-pump.html
I just had this installed last week. I have it running on the default program. My inground pool is 26,000 gallons. Can I run the pump at high speeds over night? The night before a party, I used to run my old pump with the heater. The next day it would be nice and warm. Im afraid if I leave the default program , the heater will shut off.
Yes, you can do that.
@@SPL How? Do I just increase the speed manually and it will run until the time expires?? I thought there was some type of bypass setting to run it 24-7 if I wanted to.
Hello, I stay in Northern Virginia. We have around a 26000-gallon inground pool. Length 42' and width 18'. My Pentair Intelliflo 3HP motor just went bad on the pool opening. No other Pentair pumps are available apart from this 1.5HP Superflo. We don't have a spa or any water feature, have a booster pump for Polaris. Will this 1.5HP work and if yes, what will be the ideal setting to run 12 hours to cycle all the water? Thanks
It should work fine. 1800 RPM for 14 hours, 2600 RPM for 8 hours
@@SPL Thanks a lot, appreciate it. Just ordered the Superflo pump, Let's hope they actually ship it.
The method shown here for setting the clock does not work on our pump. When I press DISPLAY and hold it the green light never flashes and the display continues to show the wrong time flashing.
Hmm. Maybe try resetting the breaker.
Pump was set up running at 1 speed @3000 for 8hrs Florida Weather what would be your recommendation to maximize savings.
1800 RPM for 14 hours. 2200-2400 RPM for 6 hours.
how do I set or disable the prime speed?
When you turn on the pump it will begin it's default priming at 3450 RPM for 5 minutes. To lower the priming speed, as the pump is in it's 5 minute priming mode simply hit the "-" on the control panel. Keep hitting it until the desired New Prime Speed is displayed. Next time the pump primes it should prime at that speed - say 2800 RPM
Lowering The Prime Speed Below 1700 RPM When The Prime Starts Will Disable It...
#GotPrime? #AskMeHowIKnow
Does this pump control panel have a battery backup? I would hate to reprogram it every time there is a power blip.
Yes, for up to 24 hours.
I only have program 1 on (cleared the other 2 program numbers.) It won't start. After I enter all the desired information 3000rpm, 5A.M. and 3 hour duration, it doesn't turn on at that time. What am I doing wrong?
Could be the clock is not set right. The correct time.
@@SPL Just checked and it is set correctly. After I'm done putting all the settings on program 1, so I have to do anything else?
I figured it out in case anyone else has the issue. This channel did not have an answer, but I do.
Enter whatever you want in the 3 programs. You can't turn any of them off if you wish. Once you're done, start the "Quick Clean" program manually and let it finish. Once that is done, the system will automatically start the next day at your settings. "Quick Clean" forces the programs to start
We just had an older Hayward replaced with this pump. Pump sits about 6 feet higher than pool water level (it's up in a retaining wall bed) -- it seems like the preset speed 2 isn't high enough and causes it to lose prime. Is there a magic number the speed needs to be programmed to or just trial and error? And is there a way to completely override the schedule and have it run on one speed until changed? I need the heat pump to run pretty continuously to get the pool temp up enough to swim in it...
You have to tinker with the run speeds. There is no always on mode but you can program a 23:59 program by just setting the run time to start a 2:00 pm and turn off for 1 minute at 1:59 pm.
@@SPL if the pump shuts off by itself at all I lose prime -- because the pump is higher than pool water level, the water drains back down and I have to refill the hair trap with water to get it primed again. It can't seem to self prime because of this. If I manually turn the motor off I close the suction from the skimmers/drain at the same time -- and only then can I just start the motor back up without adding water. I reprogrammed the speeds and times and just now realized it all went back to the factory presets.