IoT Based Patient Health Monitoring System using ESP32 Web Server

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 พ.ย. 2024

ความคิดเห็น • 291

  • @ayiemeyzingengineer4376
    @ayiemeyzingengineer4376 3 ปีที่แล้ว +7

    sir I'm a Biomedical Engineer and currently working in a private hospital, this will surely help monitor out patient wirelessly wor without contact with covid 19, it will lessen also the exposure of our frontliners.

  • @creativeelectronicchannel7647
    @creativeelectronicchannel7647 2 ปีที่แล้ว +3

    I make this project but not showing pulse max30100 sensor values how to rectify that problem

  • @adalarasu1779
    @adalarasu1779 3 ปีที่แล้ว

    Wonderful video...
    Awesome explanation...
    Greetings to you to reach heights...
    I like your efforts 💯👏👏👏

  • @curlytales5811
    @curlytales5811 ปีที่แล้ว +2

    Room temperature and humidity is not showing..
    Also If I connect the DS18B20 sensor and pulse oximeter is not showing the data parallel..If I connect one, the other one is not working..
    Kindly help resolve this issue

  • @gateaspirant2025
    @gateaspirant2025 7 หลายเดือนก่อน +1

    🎯 Key Takeaways for quick navigation:
    00:00 *🌐 Overview of IoT Patient Health Monitoring System*
    Introduction to building an IoT-based patient health monitoring system using ESP32.
    Interfacing sensors like pulse oximeter, humidity sensor, and temperature sensor with ESP32.
    Displaying parameters such as blood oxygen, heart rate, body temperature, room temperature, and humidity on a web browser.
    01:39 *🔌 Circuit Diagram and Sensor Interfacing*
    Detailed explanation of the circuit diagram for interfacing sensors with ESP32.
    Connection instructions for sensors like DS18B20, MAX30100, DHT11 to ESP32 GPIO pins.
    Importance of using dedicated PCBs for sensor interfacing to simplify the process.
    04:23 *📡 Programming and Web Server Setup*
    Explanation of the program code for sensor data collection and web server setup.
    Defining variables for sensor readings such as temperature, humidity, BPM, SPO2, and body temperature.
    Establishing a local web server connection and displaying sensor data through HTML on web and mobile browsers.
    06:34 *📱 Monitoring Sensor Data on Web and Mobile*
    Steps to monitor sensor data on a web server by accessing the ESP32 IP address.
    Demonstrating real-time monitoring of room temperature, humidity, heart rate, blood oxygen, and body temperature on web and mobile interfaces.
    Highlighting the accessibility and convenience of monitoring health parameters remotely through IoT technology.
    Made with HARPA AI

  • @pink_panther5166
    @pink_panther5166 2 ปีที่แล้ว +1

    Hi, can we buy this whole product being assembled and programmed? If possible, please let me know asap. Thank you!

  • @anantkushagra297
    @anantkushagra297 3 ปีที่แล้ว +2

    Amazing work sir, but not getting the readings of spo2 showing 0 only

    • @abdullahrahat1578
      @abdullahrahat1578 2 ปีที่แล้ว

      Have you solved this issue?

    • @anantkushagra297
      @anantkushagra297 2 ปีที่แล้ว

      @@abdullahrahat1578 yess

    • @abdullahrahat1578
      @abdullahrahat1578 2 ปีที่แล้ว

      @@anantkushagra297 can you please tell how to ?

    • @anantkushagra297
      @anantkushagra297 2 ปีที่แล้ว

      @@abdullahrahat1578 check 2 things
      First Sensor if you are using MAX30100 sensor you have to remove its 3 internal resistor to make that work..
      If you done that and still it's not working check the baud rate

    • @abdullahrahat1578
      @abdullahrahat1578 2 ปีที่แล้ว

      @@anantkushagra297 thanks bro

  • @reginaaprilia1805
    @reginaaprilia1805 4 ปีที่แล้ว +5

    Hello sir i wanna ask to you, i use max30100 and ds18b20 with nodemcu but the result of max30100 is zero, when i compile max30100 only the result is right. Why when i combine with ds18b20 the result is zero sir?

    • @adreesghaleb3416
      @adreesghaleb3416 4 ปีที่แล้ว

      like me 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

    • @reginaaprilia1805
      @reginaaprilia1805 4 ปีที่แล้ว +1

      @@adreesghaleb3416 you can change the sensor with GY-MAX30100 purple colour

    • @jaigopalkarnani97
      @jaigopalkarnani97 4 ปีที่แล้ว

      @@reginaaprilia1805 does it work using gy max30100 ?

    • @reginaaprilia1805
      @reginaaprilia1805 4 ปีที่แล้ว

      @@jaigopalkarnani97 yes it work, i change my sensor with GY-MAX30100

    • @jaigopalkarnani97
      @jaigopalkarnani97 4 ปีที่แล้ว

      @@reginaaprilia1805is it work with combination of ds18b20 ? Please send me the purchase link of it

  • @Akash-hc5zs
    @Akash-hc5zs 2 ปีที่แล้ว +2

    sir can u tell me how to make circuit diagram. means which software ur using to make circuit diagram. please tell me sir....

  • @RGPinger
    @RGPinger 4 ปีที่แล้ว +2

    next time use Intel 8 core CPU for connecting 3 sensors. This can handle attiny.. or ESP8266-01.

    • @pietervansambeeck5466
      @pietervansambeeck5466 4 ปีที่แล้ว

      it would be a lot quicker, but who cares, it is a demo, esp1, arduino mega, esp32, all can be use, just what you have at home in stock for testing.
      little bit rewriting the code and it work, I made one based on this video on a esp8266 now.
      took ma 3 days, as I don't know anything about arduino or coding, but google is a great help.
      only thing I want to know, how to change the icons now.

    • @Ankit-mq6em
      @Ankit-mq6em 4 ปีที่แล้ว

      @@pietervansambeeck5466 bro my oximeter sensor light not running and no result of oximeter sensor whyyyy?I'm using esp32 ,I directly checked my pulse oximeter by connecting
      Gnd to gnd
      Vcc to 3.3
      D21 to slc and d22 to sda but light not running whyyyy?

  • @truptipatil8895
    @truptipatil8895 3 ปีที่แล้ว +4

    Sir I tried this project but the pulse oximeter and body temperature sensor are not working at the same time. Please help me

    • @eeez476
      @eeez476 ปีที่แล้ว

      have you solved this

  • @TeesaPatel-e1z
    @TeesaPatel-e1z 3 หลายเดือนก่อน

    Yee hum. Direct mobile se kar sakte hai kyaa....???

  • @voiceoftruth1O1
    @voiceoftruth1O1 4 ปีที่แล้ว +2

    Sir. We love your tutorial. Thanks

  • @SanthoshKumar-ln2or
    @SanthoshKumar-ln2or 3 ปีที่แล้ว

    We check only patient health and what purpose of room and temperature and groom humidity

  • @celinelim2548
    @celinelim2548 ปีที่แล้ว +3

    Can anyone help me? I connected as the video shown but only temperature sensor shows value, but the MAX30100 keep showing 0 as the result. I try the oximeter separately, it can run but when I add in the temperature sensor, the reading of oximeter will not be shown. Any solution?

    • @geats654
      @geats654 ปีที่แล้ว +1

      same as me I put sensor begin();
      setwaitforconversion(false); to pass the sensor

    • @geats654
      @geats654 ปีที่แล้ว +1

      Max30100 and ds18b20 seem to be problem if their integrate with each other

    • @seniorita9
      @seniorita9 5 หลายเดือนก่อน

      @@geats654 where did you put it in the code
      does it works?

  • @saahilwrites8816
    @saahilwrites8816 ปีที่แล้ว +1

    Sir I want to do exactly same work but without connecting the sensors directly with the Arduino or esp32.
    Like wanna make sensors wearable for the patient so he don't need to go to sensors by himself everytime.
    Your response will be highly appreciated!

    • @jayavarshini2847
      @jayavarshini2847 8 หลายเดือนก่อน

      hey did you finish it?

    • @saahilwrites8816
      @saahilwrites8816 8 หลายเดือนก่อน

      @@jayavarshini2847 no I wasn't able to find required wireless sensors.

  • @esmaelkaronjr.6346
    @esmaelkaronjr.6346 2 ปีที่แล้ว

    Excellent video Sir! Is there any way the result data will be refreshed automatically? You're response is highly appreciated. Thanks!!

    • @HowtoElectronics
      @HowtoElectronics  2 ปีที่แล้ว +1

      You need AJAX webserver. You can implement it in the code.

    • @esmaelkaronjr.6346
      @esmaelkaronjr.6346 2 ปีที่แล้ว

      @@HowtoElectronics thank you brother, will work on that, and maybe you can make some videos about it if you have some time.

  • @marfatiadhruv3712
    @marfatiadhruv3712 2 ปีที่แล้ว

    One Query Sir
    If we want to run this ckt without connecting laptop, then how we can run it.
    Please give suggestions for this Sir
    &
    Thanks for giving knowledge.

  • @geats654
    @geats654 ปีที่แล้ว +2

    Sir the coding your provide very well but when i try to compile using arduino IDE error at #include no such file or directory but i have add zip library that you give how to solve it

    • @seethalathevik2052
      @seethalathevik2052 ปีที่แล้ว

      How you resolved it latter can ypu tell me

    • @gaminggenshinimpact6256
      @gaminggenshinimpact6256 ปีที่แล้ว +1

      Max30100 and ds18b20 cannot integrate together....there issue but never people solve this issue anyone solve this issue please give me the code

    • @NirajThere
      @NirajThere 11 หลายเดือนก่อน

      Same error , how did you solve this ?

    • @NirajThere
      @NirajThere 11 หลายเดือนก่อน

      ​@@gaminggenshinimpact6256please tell if you solved this.

  • @BrunoSouza-ob9rb
    @BrunoSouza-ob9rb ปีที่แล้ว

    NIce project ! Could you please tell me how to change the icon properties ?

  • @yogeshitaliya473
    @yogeshitaliya473 4 ปีที่แล้ว +1

    After long time

  • @adrianhp6549
    @adrianhp6549 7 หลายเดือนก่อน

    Can the ds18b20 sensor be used to measure body temperature???

  • @SanthoshKumar-ln2or
    @SanthoshKumar-ln2or 3 ปีที่แล้ว

    What is the use humidity sensor and what purpose to measure a room temperature plz tell

  • @zuhaibchoudhary4635
    @zuhaibchoudhary4635 3 ปีที่แล้ว

    i have also read your post exactly everyone is getting same error kindly tell how to solve it as i can clearly see you have soldered and extra wire on the pulse oximeter

  • @-Munisekhar
    @-Munisekhar 3 ปีที่แล้ว +1

    What is estimation cost of the project sir ?

  • @tomantony6495
    @tomantony6495 2 ปีที่แล้ว

    Can I use Bluetooth module and what changes are make

  • @SUDHARSSHINI56BME
    @SUDHARSSHINI56BME 13 วันที่ผ่านมา

    How to doo soldering in pluse oximeter

  • @Mirlan_Jussambayev
    @Mirlan_Jussambayev 3 ปีที่แล้ว

    Hello! Why it does not show a value of less than 93%? The person had a value of 76% of SpO2. But MAX30100 showed 94-96%.However, BPM matched the true value.

    • @rahul_yadav7362
      @rahul_yadav7362 10 หลายเดือนก่อน

      Was your project running smoothly. When temperature sensor is connected then Spo2 and Bpm reads zero. Guide me through this

  • @pietervansambeeck5466
    @pietervansambeeck5466 4 ปีที่แล้ว +1

    can you please explain how you create the icons in the web page, I don't know anything about creating web pages, but I want to reuse some part of your code for an other project with different icons.
    this project is very nice, I also created one for myself.
    keep going on, as I like to learn more.

  • @ghalibatiya875
    @ghalibatiya875 4 ปีที่แล้ว +1

    Is it posdible to add blood presure sensor to the device and how?

  • @juanangeldragon528
    @juanangeldragon528 4 ปีที่แล้ว +2

    Thanks for sharing your valuable knowledge friend, I have a question if I wanted to integrate an image in the local server, what options do I have, should I add an SD reader?

    • @HowtoElectronics
      @HowtoElectronics  4 ปีที่แล้ว +2

      Learn about SPIFFS. You can upload image to ESP32 memory.

    • @juanangeldragon528
      @juanangeldragon528 4 ปีที่แล้ว

      @@HowtoElectronics Thanks friend, it will really be useful to me

  • @nooruddinsuleman8378
    @nooruddinsuleman8378 7 หลายเดือนก่อน

    Total cost

  • @55_saiteja_ece_c_srkr67
    @55_saiteja_ece_c_srkr67 2 หลายเดือนก่อน

    sir,the same experiment done with esp8266 also...

  • @mcjovendeluna1077
    @mcjovendeluna1077 2 ปีที่แล้ว +1

    what simulator software did you use for the circuit diagram and connections?

  • @AtulKamble-hg2hn
    @AtulKamble-hg2hn 3 ปีที่แล้ว

    What is the overall cost of this project??

  • @zimba4725
    @zimba4725 หลายเดือนก่อน

    What are the libraries i want to install before run the code? I am getting many compilation errors

  • @shivangnidehariya3698
    @shivangnidehariya3698 4 ปีที่แล้ว +1

    Sir
    Im making this one for my clg project.... Sir please let me know how I can make this overall circuit in pcb instead of Breadboard... How to order pcb that u made for this particular project..
    Sir please guide me in making this project...

  • @_r.code_
    @_r.code_ 6 หลายเดือนก่อน

    What to connect in gpio 19? Please speak clearly. Pronunciation is not understandable at all

  • @willifountain2988
    @willifountain2988 4 ปีที่แล้ว +1

    which is the webserver library used ?
    please respond

  • @electronic7979
    @electronic7979 4 ปีที่แล้ว +2

    Nice project

  • @chatlaashwini5196
    @chatlaashwini5196 6 หลายเดือนก่อน

    Sir it shows some error while dumping in the esp 32

  • @nasiruzzamannasir187
    @nasiruzzamannasir187 3 ปีที่แล้ว

    in serial monitor show the garbage valu...do you have any solution on that...?????????

  • @reginaaprilia1805
    @reginaaprilia1805 4 ปีที่แล้ว +1

    Hello, I have a problem, I put a resistor pulling 4.7k on the scl and sda, but the result is zero, can you help me? And sometimes the LED lights on the max30100 don't light up, what is it?

    • @HowtoElectronics
      @HowtoElectronics  4 ปีที่แล้ว

      Problem is with the MAX30100 Module. Please check the module first. Follow the method of fixing the issue.

    • @reginaaprilia1805
      @reginaaprilia1805 4 ปีที่แล้ว

      @@HowtoElectronics yes of course sir, I have followed the method of your website but the results are zero for a long time. I tried other sensors but the results were the same. I am using nodemcu, where is the int port nodemcu connected to?

    • @HowtoElectronics
      @HowtoElectronics  4 ปีที่แล้ว +1

      Connect to GPIO16.

    • @reginaaprilia1805
      @reginaaprilia1805 4 ปีที่แล้ว

      @@HowtoElectronics thank you sir🙏🏻

    • @Ankit-mq6em
      @Ankit-mq6em 4 ปีที่แล้ว

      @@reginaaprilia1805 hello please help me I'm using esp32 but my sensor light not running ,no result nothing.
      I directly checked my sensor by connecting with esp32 but light not running ,is it se sensor fault or it is not compatible with esp32??

  • @bharathkummara1227
    @bharathkummara1227 3 ปีที่แล้ว

    Is there any solution to get those Results to gmail instead of using chrome and IP Adress

  • @liveurlyfchannel9641
    @liveurlyfchannel9641 ปีที่แล้ว

    hi,is that possible to add body fall detection and ecg?

  • @rubelislam3001
    @rubelislam3001 5 หลายเดือนก่อน

    facing problem uploading code; error message is: Error compiling for board ESP32 Dev Module."
    Please Help.............

  • @kaushikm6362
    @kaushikm6362 3 ปีที่แล้ว

    Please help me I buy all items for this and i connected circuit well but still the Arduino ide shows error 🙏🙏🙏.

  • @imhamzasajjad
    @imhamzasajjad 4 ปีที่แล้ว

    That looks very nice and to the point video and all the details in link below include secure code and explanation. let's try this and make something interesting.
    I have a question can How can I use only one sensor like DTH11 for this just temperature beacuse right now I have fewer sensors. Guide me about this.

    • @HowtoElectronics
      @HowtoElectronics  4 ปีที่แล้ว +1

      Check one of my post in website article. ESP32 SHT31 WEbserver. This will help you.

    • @imhamzasajjad
      @imhamzasajjad 4 ปีที่แล้ว

      @@HowtoElectronics thanks a lot

  • @The_introvert.
    @The_introvert. 28 วันที่ผ่านมา

    what about the schematic file

  • @anmolkrishnan
    @anmolkrishnan 3 ปีที่แล้ว

    Hi I am getting this error code how to fix this can you help me
    exit status 1
    Error compiling for board DOIT ESP32 DEVKIT V1.

  • @harshvaishnav3992
    @harshvaishnav3992 3 ปีที่แล้ว +1

    Hello,
    in my case its showing me the error Initializing pulse oximeter..FAILED
    can you please help me

    • @arunkumar.c6837
      @arunkumar.c6837 3 ปีที่แล้ว

      Did u do the wire soldering in oximeter

    • @johnsonokoli4040
      @johnsonokoli4040 3 ปีที่แล้ว

      I'm getting the same error. We're you able to resolve your?

  • @festusyame8404
    @festusyame8404 11 หลายเดือนก่อน

    Please 🙏 sir I need the code because I didn't see it well

  • @faizabatool1555
    @faizabatool1555 ปีที่แล้ว

    can u please make code with MAX30102 instead o f MAX30100 keeping other sensors same.

  • @raufaykhan7320
    @raufaykhan7320 3 ปีที่แล้ว

    can we monitor multiple patients simultaneously?

  • @وليدمحمد-ح2س
    @وليدمحمد-ح2س 2 ปีที่แล้ว

    What is the number 129.....?

  • @anvesh5377
    @anvesh5377 3 ปีที่แล้ว

    Sir please give me the answer I want to ask few questions, 1.the source code u provided is very good ,and I aslo added libraries to IDE while compiling I showing error at #include
    2.And one more is that u provided DHT11 library is not working,u didn't said about 'port' please tell me how add port

  • @prateekacharya9347
    @prateekacharya9347 2 ปีที่แล้ว

    We are doing this project but except the temperature sensor other sensors are not working.
    Any suggestions please...

    • @nanisangireddi4828
      @nanisangireddi4828 ปีที่แล้ว

      Hlo bro present memu work chestunnamu code run avvadam ledu em ayina suggest chestava

    • @prateekacharya9347
      @prateekacharya9347 ปีที่แล้ว

      Please say in English

  • @clothbazar1125
    @clothbazar1125 2 ปีที่แล้ว

    sir i am getting this message Error compiling for board ESP32 Dev Module.
    what shul i do

  • @MaheshBabu-pg5pd
    @MaheshBabu-pg5pd ปีที่แล้ว

    Bro did u cut the track in max30100

  • @chatoowandhlovu5836
    @chatoowandhlovu5836 3 ปีที่แล้ว

    Hi Sir, how can i get the complete circuit connection diagram to the breadboard.

  • @Andhira.Faldhi
    @Andhira.Faldhi 3 ปีที่แล้ว

    Can anyone explain to me why the serial monitor didnt show anything

  • @hridikaghosh6
    @hridikaghosh6 2 ปีที่แล้ว

    Can you send the full breadboard pic?

  • @ManasaN-v6o
    @ManasaN-v6o 11 หลายเดือนก่อน

    Please can I get the code of this project

  • @razeen_128
    @razeen_128 2 ปีที่แล้ว

    Can u do this with nodemcu plss??

  • @chamothkaveesha4288
    @chamothkaveesha4288 3 ปีที่แล้ว

    Other functions are works but sop2 value and heart rate are showing 0 value what shout i do?

    • @abdullahrahat1578
      @abdullahrahat1578 2 ปีที่แล้ว

      Have you solved this? Please let me know

    • @geats654
      @geats654 ปีที่แล้ว

      Same just like me😢

    • @eeez476
      @eeez476 ปีที่แล้ว

      have u solve this
      @@geats654

  • @sunilkumarm6394
    @sunilkumarm6394 2 ปีที่แล้ว

    sir plz tell me which tool can be code used sir

  • @drakehopkins5931
    @drakehopkins5931 4 ปีที่แล้ว

    didnt you put different IP address on laptop and mobile ? :/
    also how do you design this layout

  • @adamjunior4929
    @adamjunior4929 3 ปีที่แล้ว

    thanks for sharing these content I am so glade

  • @kaushikm6362
    @kaushikm6362 3 ปีที่แล้ว

    @How To Electronics
    please tell me which version of ESP32 board you used in Ardiuno ide software

    • @HowtoElectronics
      @HowtoElectronics  3 ปีที่แล้ว

      Esp32 dev module

    • @kaushikm6362
      @kaushikm6362 3 ปีที่แล้ว

      @@HowtoElectronics bro I also used and followed the same as per the video

    • @kaushikm6362
      @kaushikm6362 3 ปีที่แล้ว

      @@HowtoElectronics error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in initialization
      #define portInputRegister(port) ((volatile uint32_t*)((port)?GPIO_IN1_REG:GPIO_IN_REG))
      ^
      C:\Users\ADMIN\Documents\Arduino\libraries\DHTLib\dht.cpp:116:29: note: in expansion of macro 'portInputRegister'
      volatile uint8_t *PIR = portInputRegister(port);

    • @suveenr6452
      @suveenr6452 3 ปีที่แล้ว

      @@kaushikm6362 did you get the solution for this error

    • @kaushikm6362
      @kaushikm6362 3 ปีที่แล้ว

      @@suveenr6452 still no bro

  • @nikuharisu3371
    @nikuharisu3371 3 ปีที่แล้ว

    Can ESP32 connect to an app?

  • @KibruAyele
    @KibruAyele 3 ปีที่แล้ว

    Hello!
    1/ Is that possible to do this on Proteus instead of EasyEDA?
    2/ Do you help me sharing #MAX30100 and #ESP32 #Libraries for Proteus?
    I can't get these libraries for Proteus, Assist me pls.
    Thank you.

  • @romargarcia3186
    @romargarcia3186 3 ปีที่แล้ว

    I want to make this but i don't have codes, and i don't know how to make a webserver

  • @omkarmirkute4317
    @omkarmirkute4317 3 ปีที่แล้ว +3

    In file included from C:\Users\HP\Documents\Arduino\libraries\DHTLib\dht.h:18:0,
    from C:\Users\HP\Documents\Arduino\libraries\DHTLib\dht.cpp:30:
    C:\Users\HP\Documents\Arduino\libraries\DHTLib\dht.cpp: In member function 'int dht::_readSensor(uint8_t, uint8_t)':
    C:\Users\HP\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\cores\esp32/Arduino.h:106:91: error: cannot convert 'volatile uint32_t* {aka volatile unsigned int*}' to 'volatile uint8_t* {aka volatile unsigned char*}' in initialization
    #define portInputRegister(port) ((volatile uint32_t*)((port)?GPIO_IN1_REG:GPIO_IN_REG))
    ^
    C:\Users\HP\Documents\Arduino\libraries\DHTLib\dht.cpp:116:29: note: in expansion of macro 'portInputRegister'
    volatile uint8_t *PIR = portInputRegister(port);

  • @kaushikm6362
    @kaushikm6362 3 ปีที่แล้ว

    I request you to please give me step by step procedure.

  • @gaminggenshinimpact6256
    @gaminggenshinimpact6256 ปีที่แล้ว

    Sir can i get the full coding in email.....the coding you provide in website has error

  • @johnvincentsuarez5573
    @johnvincentsuarez5573 2 ปีที่แล้ว

    Sir, how can i add lcd monitor to view status?

  • @engsohail3088
    @engsohail3088 3 ปีที่แล้ว +7

    complete project with connection and programming

    • @suveenr6981
      @suveenr6981 3 ปีที่แล้ว

      Can please share the details to me
      at suveenr03@gmail.com
      Also please tell the way to fix max30100

  • @m.r.othman
    @m.r.othman 3 ปีที่แล้ว

    How did you make that web server

  • @dineshkadam9965
    @dineshkadam9965 3 ปีที่แล้ว

    I am getting error Webserver.h no file or directory found

  • @biomeduerm4145
    @biomeduerm4145 3 ปีที่แล้ว

    What type of board is the ESP32 that you chose in the arduino IDE? Thank you sir for the response.

    • @biomeduerm4145
      @biomeduerm4145 3 ปีที่แล้ว +2

      it shows "Error compiling for board ESP32 Dev Module.
      " that's the error that i'm dealing with, thank you for the response sir.

    • @HowtoElectronics
      @HowtoElectronics  3 ปีที่แล้ว

      ESP32 Dev Module

    • @biomeduerm4145
      @biomeduerm4145 3 ปีที่แล้ว

      @@HowtoElectronics thank you sir!

  • @nguyenngocthin8770
    @nguyenngocthin8770 2 ปีที่แล้ว

    Can you show code ? Please !!

  • @ankitjangle227
    @ankitjangle227 3 ปีที่แล้ว

    Hello sir I made this project using esp8266 but both the are not working simultaneously

    • @slayingpop965
      @slayingpop965 2 ปีที่แล้ว

      Hey bro did you project was complete can uh help me?

    • @ankitjangle227
      @ankitjangle227 2 ปีที่แล้ว

      @@slayingpop965 used two esp8266 for 2 sensors

    • @slayingpop965
      @slayingpop965 2 ปีที่แล้ว +1

      @@ankitjangle227 oh okay I'm using only 1 esp32 module 😅 Thankyou for replying ☺️✨

  • @truptipatil8895
    @truptipatil8895 3 ปีที่แล้ว

    Sir I have an error in coding of ESP32. Please help me

  • @rikofirmando9055
    @rikofirmando9055 4 ปีที่แล้ว

    Hallo sir i wanna ask u, for 2nd method, how to cut the wiring of max30100? Please tell me thank you sir

    • @rikofirmando9055
      @rikofirmando9055 4 ปีที่แล้ว

      @@HowtoElectronics use method 2nd is it working? Cause i have used 1st method isn't working the result not stable and always zero sir

    • @Ankit-mq6em
      @Ankit-mq6em 4 ปีที่แล้ว

      @@rikofirmando9055 bro help me how to do it plss how to cut and connect

    • @adreesghaleb3416
      @adreesghaleb3416 4 ปีที่แล้ว

      send to me on watsap 009647727638136

  • @pearlpatel8264
    @pearlpatel8264 4 ปีที่แล้ว

    sir i couldn't able to open the gerber file or could make my own pcb so please help

  • @ryukislive9690
    @ryukislive9690 3 ปีที่แล้ว

    code not working If anyone has a working one plz help

  • @BHUNESHBISEN
    @BHUNESHBISEN ปีที่แล้ว

    i am having problem with pox

  • @TravelTales_by_Ujjval
    @TravelTales_by_Ujjval 3 ปีที่แล้ว

    Sir it show incorrect board when I select esp Dev board , so I want to ask you which board I am select for compiling.

    • @kartheek_varma
      @kartheek_varma 3 ปีที่แล้ว

      Did you find bro which board is that for me same problem

  • @syedarief4431
    @syedarief4431 2 ปีที่แล้ว +1

    Hello..can i personal chat u for more information of this video?

  • @raheelsaleem5893
    @raheelsaleem5893 4 ปีที่แล้ว +1

    exit status 1
    Error compiling for board ESP32 Dev Module.
    need to solve this error

  • @zuhaibchoudhary4635
    @zuhaibchoudhary4635 3 ปีที่แล้ว

    Please make this video using max30105 library

  • @rajdgajera2862
    @rajdgajera2862 4 ปีที่แล้ว

    hello i am getting"" warning as library DHTlib claims to run on avr architectura(s) and may be incompatible with your board "" will you please help me here!!

  • @deevandranravindran3158
    @deevandranravindran3158 3 ปีที่แล้ว

    undefined reference to `dht::read11(unsigned char) i got this error , pls help me

  • @MrAlsan
    @MrAlsan 4 ปีที่แล้ว +2

    Awesome video can we use ESP8266 instead of ESP32?

  • @teknasrl1
    @teknasrl1 4 ปีที่แล้ว

    Hello Sir, I am mistaken for the ESP32 Dev Module board, can you help me?

  • @NGUDIVADAJAYAVARDHAN
    @NGUDIVADAJAYAVARDHAN 2 ปีที่แล้ว

    Compiling board error DO IT ESP32 DEV KIT V1

  • @rimpisaikia7416
    @rimpisaikia7416 3 ปีที่แล้ว

    Please upload this project using arduino uno and gsm...please

  • @iamiftekharalam
    @iamiftekharalam 3 ปีที่แล้ว

    can i connect UBIDOTS here? Please guide how

    • @HowtoElectronics
      @HowtoElectronics  3 ปีที่แล้ว

      Yes you can connect with ubidots using mqtt

  • @Sumonms
    @Sumonms 2 ปีที่แล้ว

    Sir how can i host it?

  • @amansinghsolanki7715
    @amansinghsolanki7715 4 ปีที่แล้ว

    Sir, please can you share the code in copy or via pdf format so, we are directly download it.
    Or learn about all the tokens and all the line. Please share in Copy or pdf format