Thanks much for this video. My WaterBoss WB93 was not going into recharge on its own so I decided to clean and re-grease all the moving parts. I marked everything with a Sharpie as I took it apart but I forgot to mark the position of the cam with the letters and numbers on it! I put it together but it didn't work. I found your video and saw how the cam was positioned and re-positioned mine to match. Put it all together one more time and it worked! Thank you for the close-up of that part.
Hi @juanito. It's been a few months now since I took it apart and I really don't remember much other than when I took it apart, I didn't take pictures or mark anything so that I would know how it went back together. When it came time to put it together, I realized that the cam probably had to be in a certain position to work correctly. I tried it a few different ways and nothing worked so when I found this video, I put the cam in sort of the same position as he shows it and it worked! I felt very lucky. I hope this helps. @@Juanito0318
I'm sure anyone at WaterBoss cringed when they heard the words 'impact driver' but sometimes it is necessary to REMOVE a stubborn screw, and of course we wouldn't use it to tighten screws into plastic. Good video! I learned quite a bit about my ProPlus 380.
Mine , the water doesn’t stop draining and I turn into bypass to stop the water draining . I tried to clicked the bottom it doesn’t works nothing shows . So I don’t know what going on anymore .
Thanks much for this video. My WaterBoss WB93 was not going into recharge on its own so I decided to clean and re-grease all the moving parts. I marked everything with a Sharpie as I took it apart but I forgot to mark the position of the cam with the letters and numbers on it! I put it together but it didn't work. I found your video and saw how the cam was positioned and re-positioned mine to match. Put it all together one more time and it worked! Thank you for the close-up of that part.
Could you explain that a little more for me please
Hi @juanito. It's been a few months now since I took it apart and I really don't remember much other than when I took it apart, I didn't take pictures or mark anything so that I would know how it went back together. When it came time to put it together, I realized that the cam probably had to be in a certain position to work correctly. I tried it a few different ways and nothing worked so when I found this video, I put the cam in sort of the same position as he shows it and it worked! I felt very lucky. I hope this helps.
@@Juanito0318
I'm sure anyone at WaterBoss cringed when they heard the words 'impact driver' but sometimes it is necessary to REMOVE a stubborn screw, and of course we wouldn't use it to tighten screws into plastic. Good video! I learned quite a bit about my ProPlus 380.
Very helpful, thanks for sharing!
cheers to the best Lite frothy hah! Great explanation and even provided a difficulty scale: two or three coldies, that’s an easy job!
Show please, how to disassemble and clean the injector
My unit will not remove the water in step 2. It just fills brine tank and stays there.
Mine , the water doesn’t stop draining and I turn into bypass to stop the water draining . I tried to clicked the bottom it doesn’t works nothing shows . So I don’t know what going on anymore .
“Hey honey he’s drinking a beer too!”
Donde puedo comprar piezas de este aparato
Gracias
Where do U get that assembly for the the water boss softener please
Called water boss!
How do I get my to stop flashing e2