There is a saying "Great minds think alike" the MAN SKRS is the one I have ordered! Because like you I want to map the push button to engine braking. I will be fitting mine to a Thrustmaster TH8A shifter.
@@TheClumsyGeekGaming true, but just look at the people in-game every evening, 40.000 ETS2, Raceroom 600, ACC 3000 and non of them is using a manual shifter I bet. Really strange. I thought about a shifter as well. I'm currently more interested in trucking than racing. It's more relaxing :) But a shifter with shifter knob is quit expensive.
So i got this device the screws i had came witb it did not match ??! What exactly size do i need for them to fit 🤔 i cant figure this out for nothing plesse selmeome tell me what size i need thsnk you it came with three of them idk why i need them
Lol that moment when you wanted to switch to range and you were heading for the Logitech button 😂😂 I’m sure that’s going to happen for a while. Regardless the shifter looks beautiful. And also in yesterday’s stream when I said that I’m using the ZF 16 speed layout, it actually turns out I’m using the ZF 16 but with the Eaton fuller mod. I’m used to it now but when I did try the regular pattern it was very confusing for me. Anyway, I’m blabbering, it was a nice presentation of the shifter, maybe I’ll buy one during the summer.
There's almost no differecne between a ZF 16 and an Eaton 18. There's no crawler gear on the ZF and reverse is located at the bottom, not the top. What's confusing about it? xDD
I just bought a skrs simu shifter.......why when i configure it.....my wheel steering configuration change?????.......the direction appears turned all to the left.....and when i turn to the right..the tyres only arrive to the central position....i can't turn to rhe right........PLEASE HELP ME
@@limitededition3295 just one. The typical usb port (not type c). More details you'll probably get from the store itself when you contact almar. Good luck!
HOLD UP THE PHONE (as Jim from "Jim's knows better" show would say). YOU DIDN'T TOLD US THE MOST IMPORTANT THING. HOW WAS YOUR MICHAŁKI (those polish candies you had there)?
Clumsy that was a fast repley. Ps the other csio hkrs shifter would of takeing a lot longer to shift and did not look as nice as then almar hkrs shifter
Haha yeah just happened to look at my phone. I heard people who ordered from csio haven't gotten theirs even after 6 mos, and there is zero communication.
It depends on what shifter layout you choose in the controls settings in-game. Iirc if you choose ZF/scania/volvo (ets2) or Eaton fuller (ats) you'll get the L and H indications.
Hi! You mentioned in the SCS forum, that you shipped it to Singapore; I'd like to ship it to Germany, but I do not feel comfortable translating each sentence on the page via Google-Translate, so my question is who did you actually order the shifter, on the website itself or via E-Mail / Phone? My experience in online-shopping is quite limited, I only know amazon ;-) Regards and thanks for the video!
Yup! Shipped to singapore. I bought it from ebay. I remember messaging him first and asking some questions. You could probably do the same so you will feel better if he can deliver what you need or not. Good luck!
how much does it cost in £? and is it leather? is it compatible with the thrustmaster shifter? can i order one with a plain plate? can you give me a link please?
Link should be in the video description 👍. It'll be better if you ask the seller directly. I might give some inaccurate info. I believe it's compatible with thrustmaster.
It's not really worth it honestly. You can make one yourself for 1/3 of the price. A genuine gear knob doesn't cost more than €30. From there the only thing you need is a USB joystick panel that you can buy from Aliexpress or any other site for like €5. All you have to do is solder the wires of the range and the splitter in gear knob to the wires that you'll connect into the USB panel. Then you have to find a way to mount the knob onto your shifter. There are a good couple of videos about this as well as a topic on the SCS forums. All in all requires a bit of thinkering and work, but it's not difficult and it costs very little money compared to what the SKRS guy sells them for.
It really depends. If your a DIY guy, you're right, you're probably better of building it yourself. If you're like me on the other hand, with zero DIY skills, save yourself the hassle and frustration. Just go buy and be happy, earn back that cost, instead.
@@TheClumsyGeekGaming I don't know. It's really low effort and doesn't too much skill but fair enough. Btw do you remember the guy called "f4ntom"? That's me :D
@Vince Hoffman sadly not, if they did i would have gotten that one instead of the MAN TGA one, since im a massive DAF fan. the company does make other interesting things, like a parking brake lever, turn signal levers, and button boxes with a ignition key, and american style trailer and truck brake push/pull buttons. pphalmar . PL is their official website, if you use the google chrome translate page funtion you can find your way around and check out which things they make.
@Vince Hoffman ik herinner me nog goed dat ik voor de eerste keer meeging op de DAF95 ATI 360 van mijn vader. een tijd geleden, sinds dien een fan van DAF. en ja je ziet ze hier inderdaad veel, DAF vrachtwagens. maar dat is wel logisch aangezien DAF een Nederlands merk is. en het is inderdaad jammer dat ETS de kleine vrachtwagen modellen niet in het spel heeft, ook jammer dat er geen bakwagens zijn.
Nice unboxing . I like how explained the buttons . Nice video . BTW u started to continue the ride with daf. So next episode where will u start😁. I thought u will test this man shifter with man truck but u didn't :(. Also I forgot to ask . Can we use 16 to 18 speed shifts in this shifter because there are trucks like kamaz, maz, Ural and many more that use these gear boxes . So plz let me know👍👍
Haha thanks! Yeah it takes too long to configure a new MAN truck, and I'm liking the DAF too much currently lol. Yes it should work, as long as the layout also uses the traditional H-shifter pattern + range/splitter.
Clumsy For what transmission? I drive truck for a living and I have never seen that shifter but all the trucks I've driven have Eaton fuller transmissions. So that might be why, either way I don't like that shifter. I'd be pissed if that was in my truck lol
Clumsy the CSIO technologies SKRS is a proper shifter. That's the same as in every rig I have driven from the 70s to now. No I'm not that old I've just driven a lot of different trucks
It's from a MAN truck. European so probably why it has a very different layout. Csio unfortunately is not sustainable. People have been waiting more than 6 months for their shifter to arrive, with zero communication from the seller.
Clumsy Ah I see lol Was in the hospital yesterday and wasn't able to have my volume on, now all makes sense lol. To bad about csio, been wanting to try out a truck simulator but want to get a shifter first. Guess I'll keep searching. Thank you.
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Hi, got the same model just before the lockdown and it's a treat. Awesome products.
Great to hear! I'm still using it to this day.
Hey, how long did it take for you to recieve the shifter?
Polish skrs is good! :D
Definitely agree!
0:38 Tubers from Wawel [ Wawel is a castle or a confectionery company from Kraków ] ☺️
Oh cool! Haha thanks for the info. Good thing we have Polish friends here. :D
Yeees 😀
Finally the long waited for, shifter is here... Nice! Now trucking will be more interesting than before.
Haha yes! I'm sure it will help a lot. 👍😊
There is a saying "Great minds think alike" the MAN SKRS is the one I have ordered! Because like you I want to map the push button to engine braking. I will be fitting mine to a Thrustmaster TH8A shifter.
Great to hear man. Enjoy!
I also got one. But I ordered the Scania 12+2 Gear Shifter
Nice enjoy!
Thank you. Very nice video. I was looking for it and I found what I was looking for. I didn't know why you used it splitter
the side button is used as clutch in real MAN trucks
Yes, interesting setup isn't it. 👍
kind of strange that Fanatec does not have something like this in there portfolio, they have a proper H pattern shifter but nothing for truckers
Yeah, I guess they cater more to the racing than the trucking community.
@@TheClumsyGeekGaming true, but just look at the people in-game every evening, 40.000 ETS2, Raceroom 600, ACC 3000 and non of them is using a manual shifter I bet. Really strange. I thought about a shifter as well. I'm currently more interested in trucking than racing. It's more relaxing :) But a shifter with shifter knob is quit expensive.
So i got this device the screws i had came witb it did not match ??! What exactly size do i need for them to fit 🤔 i cant figure this out for nothing plesse selmeome tell me what size i need thsnk you it came with three of them idk why i need them
Lol that moment when you wanted to switch to range and you were heading for the Logitech button 😂😂 I’m sure that’s going to happen for a while. Regardless the shifter looks beautiful. And also in yesterday’s stream when I said that I’m using the ZF 16 speed layout, it actually turns out I’m using the ZF 16 but with the Eaton fuller mod. I’m used to it now but when I did try the regular pattern it was very confusing for me. Anyway, I’m blabbering, it was a nice presentation of the shifter, maybe I’ll buy one during the summer.
Rohan rx just a matter of seconds . Buy it now itself . Don't wait for summer ;)
Haha yeah old habits die hard. It's going to be a lot more dangerous now that I've mapped the parking brake to the old range button 😅
There's almost no differecne between a ZF 16 and an Eaton 18. There's no crawler gear on the ZF and reverse is located at the bottom, not the top. What's confusing about it? xDD
I just bought a skrs simu shifter.......why when i configure it.....my wheel steering configuration change?????.......the direction appears turned all to the left.....and when i turn to the right..the tyres only arrive to the central position....i can't turn to rhe right........PLEASE HELP ME
Grats! Hmm try reconfiguring your wheel. Maybe there's a conflict with the calibration. Try getting in touch with the seller for more expert support.
Questions for u where is best to buy from ebay or can u tell where I can get it plz? Thanks
Thank you!
First again :-) and congrats on the new shifter
Thanks man!
Do i need to map gears like 6 speed or like on the plate on top beacause i dont know
You can map it any way you like. You can copy what's on the plate or go with something completely different.
@@TheClumsyGeekGaming also how many usb ports i need and what type
@@limitededition3295 just one. The typical usb port (not type c). More details you'll probably get from the store itself when you contact almar. Good luck!
133€ for a 2 knobs handle? Crazy xD
20-30€ ok, but 133? This world is really at the end^^
8:45 broooo stephen hawking pulling up make way make way
HOLD UP THE PHONE (as Jim from "Jim's knows better" show would say). YOU DIDN'T TOLD US THE MOST IMPORTANT THING. HOW WAS YOUR MICHAŁKI (those polish candies you had there)?
Lol awesome! I'll definitely buy more next time I'm there.
It's here people!
Yesssssss!
Ja jestem z polski 😊😊😀
welcome!
you are the best
8:45 they see me rollin´ they hatin´ hahaha
😅
small button is a clutch
Indeed
5 day shipping is pretty fast for any skrs shifter.
Indeed. I was pleasantly surprised. Plus, the tracking was very accurate. Timestamps for each activity and location were clearly indicated.
Clumsy that was a fast repley. Ps the other csio hkrs shifter would of takeing a lot longer to shift and did not look as nice as then almar hkrs shifter
Haha yeah just happened to look at my phone. I heard people who ordered from csio haven't gotten theirs even after 6 mos, and there is zero communication.
It's really nice video
Nice one bro congrats
How do you use the boot with it? My boot is ripped and i want to replace it. Any help is appreciated
What do you mean boot? If that comes with the product, you can try getting in touch with the seller for support. I'm sure he has some useful tips.
How do you get the display to say low and high gear?
It depends on what shifter layout you choose in the controls settings in-game. Iirc if you choose ZF/scania/volvo (ets2) or Eaton fuller (ats) you'll get the L and H indications.
Is this shifter compatible to the Thrustmaster shifter?
I believe so, but I suggest checking the page itself and consulting with the seller.
Hi! You mentioned in the SCS forum, that you shipped it to Singapore; I'd like to ship it to Germany, but I do not feel comfortable translating each sentence on the page via Google-Translate, so my question is who did you actually order the shifter, on the website itself or via E-Mail / Phone? My experience in online-shopping is quite limited, I only know amazon ;-)
Regards and thanks for the video!
Yup! Shipped to singapore. I bought it from ebay. I remember messaging him first and asking some questions. You could probably do the same so you will feel better if he can deliver what you need or not. Good luck!
@@TheClumsyGeekGaming Thank you!
Can you add a package with sound or a link to the sound
Sound of what? The music? abstractionmusic.com
@@TheClumsyGeekGaming openpipe daf
Ah. Check out the mods list bit.ly/ClumsyMods
link from map ??? its very realistic
You can check the mods list link in video description. Actually I can't remember if there's a link here, so let me give it to you: bit.ly/ClumsyMods
how much does it cost in £? and is it leather? is it compatible with the thrustmaster shifter? can i order one with a plain plate? can you give me a link please?
Link should be in the video description 👍. It'll be better if you ask the seller directly. I might give some inaccurate info. I believe it's compatible with thrustmaster.
ok thank you
I must have G27/g29 shifter?
iTheDarkWolf Thrustmaster works too
Anyone know if they will do a right hand drive version?
Hmm have not heard anything about it.
Clumsy cheers. Just for us Brits who drive on the wrong side of the road lol 😂
totally understand lol.
it is right handed you mean left handed
Right hand drive version meansthe shifter is on the left 👍
can the plate be changeable?
I don't think so. You can get shifters from other trucks, though (scania, volvo).
If anyone is thinking about dropping the $ on this, I did, and I received it all the way from Poland to Illinois, US in...THREE DAYS!!!
Pedal/wheel/shifter-cam incoming? :)
Not sustainable, unfortunately. I had a tripod and cam blocking my view from the monitor the entire time, and I had to sit a very awkward position 😂
8:46 Need for Speed :D
😅
They see me rollin....
Is this still worth it, or there are better alternatives?
I have a G27 too.
Still worth it imo. Good luck!
@@TheClumsyGeekGaming Nice, thanks.
It's not really worth it honestly. You can make one yourself for 1/3 of the price.
A genuine gear knob doesn't cost more than €30. From there the only thing you need is a USB joystick panel that you can buy from Aliexpress or any other site for like €5.
All you have to do is solder the wires of the range and the splitter in gear knob to the wires that you'll connect into the USB panel. Then you have to find a way to mount the knob onto your shifter. There are a good couple of videos about this as well as a topic on the SCS forums.
All in all requires a bit of thinkering and work, but it's not difficult and it costs very little money compared to what the SKRS guy sells them for.
It really depends. If your a DIY guy, you're right, you're probably better of building it yourself. If you're like me on the other hand, with zero DIY skills, save yourself the hassle and frustration. Just go buy and be happy, earn back that cost, instead.
@@TheClumsyGeekGaming I don't know. It's really low effort and doesn't too much skill but fair enough.
Btw do you remember the guy called "f4ntom"? That's me :D
Where are you from?
I live in Singapore.
they also make Scania and Volvo model :D
@Vince Hoffman sadly not, if they did i would have gotten that one instead of the MAN TGA one, since im a massive DAF fan.
the company does make other interesting things, like a parking brake lever, turn signal levers, and button boxes with a ignition key, and american style trailer and truck brake push/pull buttons.
pphalmar . PL
is their official website, if you use the google chrome translate page funtion you can find your way around and check out which things they make.
@Vince Hoffman ik herinner me nog goed dat ik voor de eerste keer meeging op de DAF95 ATI 360 van mijn vader. een tijd geleden, sinds dien een fan van DAF.
en ja je ziet ze hier inderdaad veel, DAF vrachtwagens. maar dat is wel logisch aangezien DAF een Nederlands merk is.
en het is inderdaad jammer dat ETS de kleine vrachtwagen modellen niet in het spel heeft, ook jammer dat er geen bakwagens zijn.
I do miss stream on you tube but twitch amd your tube are not so friendly together
yeah too bad. if ever twitch works out for you, more than welcome to join back in.
This Is really Good but Sadly I have Logitech Driving Force Gt..Gr8 investment..✌️
It is! Oh not sure if it's compatible with that. Page says it's for g25, g27, g29, and g920.
Clumsy No it won't be bcoz The Gear shifter on DrivingFGt only has up and down.. movements Thats why sadly..🙂
Nice unboxing . I like how explained the buttons . Nice video . BTW u started to continue the ride with daf. So next episode where will u start😁. I thought u will test this man shifter with man truck but u didn't :(. Also I forgot to ask . Can we use 16 to 18 speed shifts in this shifter because there are trucks like kamaz, maz, Ural and many more that use these gear boxes . So plz let me know👍👍
Haha thanks! Yeah it takes too long to configure a new MAN truck, and I'm liking the DAF too much currently lol. Yes it should work, as long as the layout also uses the traditional H-shifter pattern + range/splitter.
Clumsy OK thanks
hi can you give me a link to your sound mod? That daf truck sound is very nice!
It's by the legendary kriechbaum 😊 daf xf open pipe sound 10.0. Here's the mods list I use: goo.gl/pVmKYf
thank you, nice sound :) nice shifter... :)
My pleasure. Enjoy!
second btw how can i get southern region map download is broken
Download is ok, just get from the scs forum / promods.net link in the mods list. Sometimes servers are just busy.
Clumsy well oke thx i will retry it
Give me that daf mod and sound
It probably doesn't work by now, but you can check the mods list link in the video description. If not there, it should be in one of my recent vids.
@@TheClumsyGeekGaming ah ok, ty
Orginal product
www.ebay.pl/sch/befereture/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&LH_PrefLoc=0
Twitch wore but i can not comment on twitch live stream
Why not? You can't sign up?
Splitters to far down
It's from a real truck, though. 😅
Clumsy For what transmission? I drive truck for a living and I have never seen that shifter but all the trucks I've driven have Eaton fuller transmissions. So that might be why, either way I don't like that shifter. I'd be pissed if that was in my truck lol
Clumsy the CSIO technologies SKRS is a proper shifter. That's the same as in every rig I have driven from the 70s to now. No I'm not that old I've just driven a lot of different trucks
It's from a MAN truck. European so probably why it has a very different layout. Csio unfortunately is not sustainable. People have been waiting more than 6 months for their shifter to arrive, with zero communication from the seller.
Clumsy Ah I see lol Was in the hospital yesterday and wasn't able to have my volume on, now all makes sense lol. To bad about csio, been wanting to try out a truck simulator but want to get a shifter first. Guess I'll keep searching. Thank you.
okurwa