Thank you bro, this saved my gtx 1060 3gb for the next few months until my intel b580 arrives. Budget gaming is the way to go, I love these kinds of optimizations.
Hey, I just want to say thank you; it works on my old ROG (i7 7700 + GTX 1050 4GB). I think the game must be version 1491.50; before, I was on 1311.23, and it didn't launch at all. However, after patching, it does work. On a note, I played on cracked version. I was using version 3.1, after looked version 3.1.2 doesn't feel right for me because there are too many glitches. Although version 3.1 also had some glitches for me, they weren't bothersome to me. I get 45-60+ FPS on low settings using ultra performance mode in a 1600x900 windowed resolution. This is better than two years ago when I try this game and only got a maximum of 30 FPS, if I remember correctly. I'm giving this game another chance because RDR 1 was recently released, and it has native FSR 3 support. I'm wondering if there’s any similiar workaround for RDR 2, and I found your videos-thank you once again! If i dont mind asking, is there a similiar mod for Days Gone? I think it was a good game, but doesn't optimize for my end 😅
@@gtx1660super6gb Is it the same version as you linked in the description? And how about the installation process, is it similar as in the videos? And if it was similar, is it applicable to another game that doesn't natively support FSR 3? Sorry if i was too much asking🙏
@@Mr19021998 if its support DLSS/FSR natively, you can use this mod.it doesn't have to support FSR3. it will work, but ui/hud flickering can be only fixed by mod makers. most of UE games are fine. but different engines need some extra care.
Maybe i found the problem, 2 upscalers are not working together (Optiscaler + RDR2Upscaler in mods folder), my game always crashed when i pressed insert. Then i renamed mods folder to mods.old. Now it is working, i use the files from RDR2_FSR_3.1.2_FG.zip. If you extracted both zip files you have a mods folder, rename it and pressing insert key wont crash the game anymore.
doesnt work with my gtx 1660s my rdr2 wont launch and keep force closed, i think that is crashed with other mod that i installed but i only instal mod extreme grass and nothing more, maybe there is any fix?
Bro there is a nvidia feature that people use to reduce the input lag caused by fsr3 while keeping fg on, don’t know if it is reflex or what.Do you know about it?
I had read some comments and I had the same problem with a black screen, especially when I was using the dxgi.dll file and I got the black screen and game wasn't launching...
1. is your game version 1491.50? 2. is it the legit game or the free one? 3. did you installed any other upscaling or reshade mods before installing this mod? 4. what is your GPU? 5. Are You Running the game in DX12 Mode?
1. My game is older than that version; 2. It's free one like in your video guide about install fsr 3.1.2 mod; 3. No, I haven't installed any another mod before your comment about fixing my problem; 4. My gpu is the AMD Radeon RX560X; 5. I don't know.
@gtx1660super6gb Dude I entered by accident, then I uninstalled and deleted the mods, I verified the integrity of the game files, I can access my online account with a clean installation.
I did everything, but when i run the game, it shows a black screen but i can hear game's sound and also Arthur's talking, can you help me i have gtx 1650
i found on nexus mod it's says if u have amd gpu this mod can give you dlls instead of fsr 2.0 it's nvngx_dlss where to put that file in the main folder of rdr2 and start the game i will have dlls and i can use it right ?
@@gtx1660super6gb thanks for the video guide now i successfully installed the mod..but can help me to fix weird graphics on athur when turning mouse fast..
@@KabuteGaming reinstalling the game, gonna try it again...edit reinstalled it, doesn't work. Still no option to select DLSS/FSR3 option and the game is broken once in it. Oh well
![How To Rob Trains & NO BOUNTY! The PERFECT Robbery - Red Dead Redemption 2 Easy Money [RDR2]](http://i.ytimg.com/vi/_UANnDH1oh0/mqdefault.jpg)
![RDR 2 FSR 3 Frame Generation Mod [Hud Fix] #reddeadredemption2 #rdr2](http://i.ytimg.com/vi/bVNjKcgMWHg/mqdefault.jpg)
Thank you bro, this saved my gtx 1060 3gb for the next few months until my intel b580 arrives. Budget gaming is the way to go, I love these kinds of optimizations.
Thank you for this! Easy to setup, you earned a sub!
Thanks for the sub!
Thank you brother I will try this later wanted to play this masterpiece once again!!
need some help, i dont have the mod file, where to find?
Hi, good evening, I did all the steps in FSR 3.1.2 but unfortunately, when I press the insert key, the mod's HUD is not appearing.
set this OverlayMenu=auto value to true in the nvngx.ini file and see.
same
@@gtx1660super6gb i tried it too but not worked i get ghosting flickering on aurthor and game crashes when i open overlay by insert key...
Dude, I did all the steps in the video and when I opened the game I got a black screen. I have the rockstar version
Same happened to me. I as well followed all the steps
Hey, I just want to say thank you; it works on my old ROG (i7 7700 + GTX 1050 4GB). I think the game must be version 1491.50; before, I was on 1311.23, and it didn't launch at all. However, after patching, it does work. On a note, I played on cracked version.
I was using version 3.1, after looked version 3.1.2 doesn't feel right for me because there are too many glitches. Although version 3.1 also had some glitches for me, they weren't bothersome to me. I get 45-60+ FPS on low settings using ultra performance mode in a 1600x900 windowed resolution. This is better than two years ago when I try this game and only got a maximum of 30 FPS, if I remember correctly.
I'm giving this game another chance because RDR 1 was recently released, and it has native FSR 3 support. I'm wondering if there’s any similiar workaround for RDR 2, and I found your videos-thank you once again! If i dont mind asking, is there a similiar mod for Days Gone? I think it was a good game, but doesn't optimize for my end 😅
Unfortunately No. you can use FSR 3.1.2 FG for Days Gone. but the HUD flickering is not fixable. YET. maybe in future 😅
@@gtx1660super6gb Is it the same version as you linked in the description? And how about the installation process, is it similar as in the videos? And if it was similar, is it applicable to another game that doesn't natively support FSR 3? Sorry if i was too much asking🙏
@@Mr19021998 if its support DLSS/FSR natively, you can use this mod.it doesn't have to support FSR3. it will work, but ui/hud flickering can be only fixed by mod makers. most of UE games are fine. but different engines need some extra care.
@@gtx1660super6gb Thanks for the insight, i'll might giving it another chance for Days Gone.
Good video
Thanks
My game is no longer working.
Maybe i found the problem, 2 upscalers are not working together (Optiscaler + RDR2Upscaler in mods folder), my game always crashed when i pressed insert. Then i renamed mods folder to mods.old. Now it is working, i use the files from RDR2_FSR_3.1.2_FG.zip.
If you extracted both zip files you have a mods folder, rename it and pressing insert key wont crash the game anymore.
Thanks for the mod with my gtx 1650 i was getting 40 fps but now im getting 75+
my game not starts
@@Techie-Tales Im using pirated version
@@lordsama3745 у вас версия rdr 2 1436.28?
@ i have vr 1491.50 from fitgirl repack
@ Do I understand correctly that I will not be able to install the mod for build 1436.28?
from 30fps to 45+ fps. at least it's playable now so good enough
How to enable this along with other reshade settings like fakeHDR and saturation adjustments?
I dont think you can use fakehdr. Because mod uses its own hdr settings.
doesnt work with my gtx 1660s my rdr2 wont launch and keep force closed, i think that is crashed with other mod that i installed but i only instal mod extreme grass and nothing more, maybe there is any fix?
3.1 does not makes difference,i have same specs as you(just i7 4790 not s variant)
And 3.1.2 crashes when I press insert key
same here
Bro there is a nvidia feature that people use to reduce the input lag caused by fsr3 while keeping fg on, don’t know if it is reflex or what.Do you know about it?
It's Reflex you can turn it on on the graphics settings below V-sync, but it usually comes enabled by default
@ that’s amazing
Increase fps by fsr 3
And cancel the delay with reflex🔥
Can you help me? Game wont start aftee installing FG 3.1 mod following all RTx cards steps, I have a RTx 3070 ti, I have the razor version of the game
as i remember its meant for a specific gpu, in that case, the gtx 1660, try looking for a fsr directed to the 3070
@@cauaauvesэто никак от этого не зависит, прошлая версия фср 1660 на моей 3070 работала прекрасно.
do you really need frame gen with a powerful gpu like that?
I did the same thing but the dlss function did not appear in the game, my video card is also 1660s
Please can you help me
I have installed the latest version of this game which you recommended me, but now game requires that I activated license for it...
I had read some comments and I had the same problem with a black screen, especially when I was using the dxgi.dll file and I got the black screen and game wasn't launching...
1. is your game version 1491.50?
2. is it the legit game or the free one?
3. did you installed any other upscaling or reshade mods before installing this mod?
4. what is your GPU?
5. Are You Running the game in DX12 Mode?
1. My game is older than that version;
2. It's free one like in your video guide about install fsr 3.1.2 mod;
3. No, I haven't installed any another mod before your comment about fixing my problem;
4. My gpu is the AMD Radeon RX560X;
5. I don't know.
I'm installing the newer version of this game to fix this problem.
Estaría Genial si hicieras un vídeo con la generación de fotogramas para el God Of War Pero no en Ragnarok si pudieras hacerlo porfa
Dude, I installed my game on Rdr2. I did the same as in the original video. I even logged in with RDR and it worked. Is there a risk of ban?
don't use these on online.
@gtx1660super6gb Dude I entered by accident, then I uninstalled and deleted the mods, I verified the integrity of the game files, I can access my online account with a clean installation.
I really have a very similar specs as you i7 4790 Gtx 1660 but the game is not opening
I did everything, but when i run the game, it shows a black screen but i can hear game's sound and also Arthur's talking, can you help me i have gtx 1650
Same graphics card and same problem with me
Have you compared it with loveless scaling
I dont have mod folder
Have solution?
Bro RDR2_FSR_3.1_FG.zip comes with a virus. This had never happened before with any of your "FSR MOD" Tuto videos. Can you come clear about this?
I also noticed it showing up as that did a Virus total scan and it came up negative. Not sure whats going on with Windows Defender.
if onlly 1 AV flag as a virus, its a false positive.
i found on nexus mod it's says if u have amd gpu this mod can give you dlls instead of fsr 2.0 it's nvngx_dlss where to put that file in the main folder of rdr2 and start the game i will have dlls and i can use it right ?
bro fsr 3 works fine but 3.1.2 shows failed to initialize graphics device rdr2 ERR_GFX_INIT
i have the game on steam which it keeps updating right, will it work? it s on the latest version obiously
please help me, when ipressinsert key the game will crash err_gfx_state and give me your ini file if you can
when i use frame gen on its foggy and random box appearing
I cant see the dlss in settings, im using rx 6600 xt
One Amd user confirmed this worked for his 6700 gpu. It's must be something wrong with your end. Not the mod.
@@gtx1660super6gb I have a 6750XT and also can't get it to work. Doing exactly what you did and/or instructed
Tried all the tutorials but rdr2 doesn't launch at all
my game not starts
Crashes my game when pressing ins
same did u fix?
why my game is not openning
THERE IS A TROJAN IN THE FILE !
where dude?
Modification files always flagged as malware. So if you dont like to take chances, dont.
You can check from virus total
INTEL 520,I56GEN,16GBRAM MEKE OKA GAHNNA PLUVNDA? FSR 3.1.2 Frame Generation Mod EKA DALA FPS KIYAK YAIDA?
inme nvidia dlss setting not appear why
Amd?then which amd gpu?
@@gtx1660super6gb im use nvidia gtx 1050 graphic card
1311.16 game version will work this mod?
Dont know about that.
Brother its works on gtx 960m vulkan
theres a virus in the file
Modification files always flagged as malware. So if you dont like to take chances, dont.
brother can u please use fsr 3.1 in avatar frontiers of pandora
I will make a video.
anybody, help, can i enable fsr 3 native aa with frame gen?
my game not starts
What causes the crash menu when opening?
Any error massages?
@@gtx1660super6gb Crash in the game when opening the menu dlss
is it fix now?
@Jaygk5 no
gtx 1650 showing blank screen
It should work for gtx cards. Even amd card users say this worked for them. Must be something wrong with your end.
Is this compatible with 1080ti?
@@honkhonk1555 it should.
Hello friend, dlss does not appear, I did everything as in the video
Game version?
same, version 1491.50
@@gtx1660super6gbversión 1491.50 steam
yo gng it doesnt show dlss
not working
why i get black screen?
does this mod work with mods installed?
Which mod?
@gtx1660super6gb i have many mods installed like whyem dlc and such
dlss somehow doesnt appear in the graphics settings
Does it work for rdr online too?
I think you can get banned for that so I wouldn't recommend it
bro it is not working i cant see dlss on game settings
try using dx12 instead of vulkan
Does it works in online too?
don't use these on online games !
@@gtx1660super6gbso i have to removr fsr from files then? To plar rdro
i put all file in the folder but when launch just black screen rdr2 fitgirl build 1311.23..can help
Im using 1491.50 version. That could be the problem.
@@gtx1660super6gb thanks for the video guide now i successfully installed the mod..but can help me to fix weird graphics on athur when turning mouse fast..
do mods work with this
Which mod?
@ mods like rampage trainer and more popular mods. Since these fg mods don’t work with mods like those
@@cynz5294 i will try them and let you know.
no it's not working i tried.@@cynz5294
tried it.. doesnt work. shows a black screen and thats it. i use v 1491.50 from fitgirl
Gpu?
@@gtx1660super6gb gtx1650ti
also the computer says the 3.1 version has trojan
@@abhayagastya did you find a fix or did you restore the dlls? i use the same version and it wont start either
@@No-jt5nf I found a different frame generation method from another video... Fps jumped from 30s to the 70s
too many glitches bro
For gta 5 bro
Lol not working at all😂
Lol work got 70 fps
Sadly still not working for AMD. Oh well
I think you meant to say it doesn't work for YOU. It works for all 3 of my AMD GPUs. 7900XT, RX 7600, and RX 6700
@@KabuteGaming reinstalling the game, gonna try it again...edit reinstalled it, doesn't work. Still no option to select DLSS/FSR3 option and the game is broken once in it. Oh well
Does it work with ryzen 3500u (vega 8 gpu) but with 32gigs ram @@KabuteGaming
@@SurajKumar-vi7yy Why dont you try it and let us know?
My 1080 said thanks
discord link please 🙂
it's in the video description.
My game crashes when i press insert