Brian Demers I turned off the volume and followed along replacing my battery at the same time. It was very easy to watch and follow. I can't imagine what you are not able to understand.
Seriously dude. Thank you do much for this video. I was having difficulty because the battery was slightly out of place. I was afraid I would have to purchase a new one even though I am still on a plan. All I needed to do was open it up and reconnect some things. Again thank you so much. You saved me money and time. Absolute hero.
Very helpful! Stopped using my Galaxy Tab 4 because it doesn't hold a charge very well. And, I just ordered the batter for it that comes with a set of tools! Although I have a PC workstation I built and a MacBook Pro, getting the use of the Galaxy Tab 4 back into my tech quiver is something I've been needing for a while.
Thanks a lot for super clear no nonsense video.Fixed mine. Important,when taking cover off, do it as you do, slide the flat edge along and it will pop up avoiding cosmetic case gouges. I used fine flat screwdriver, and a thin kitchen knife to pop off the connecter cable connectors inside.
vastly better than the totally crap printed and badly shot instructions that came with my replacement battery. if I had seen this video first, I would not have spent hours cracking the slate open and buggering up the seams in the process. and gotten the ribbon cables connected right, THE FIRST TIME. THANK YOU!
Worked a treat to replace my TAB 4's swollen battery. Only things to add from my experience is the back cover was harder to get off than it looked in the video and I had a couple of extra bits of tape holding the cables down which needed taking off before opening the cable clamps. Great helping video. Thankyou.
thank you for the video tutorial...I would like to add 1 thing: it is a better idea to use a plastic safe tool or device other than a metal pry tool to unclip the battery plug. As I unclipped it from underneath as shown, I saw a very small spark. Thankfully no damage, but it doesn't take much to ruin electronics. Just a small tip... thanks again.
Great video! Took me about 20 mins.. Bought my battery kit and tools from A1 parts Quebec, Canada, but there was no instructions so this was very helpful
I just did my daughter's... didn't even need to unplug those ribbon wires.. unplugged it, took screws out.. popped it loose and slid it out the side... 10 minutes done.. thanks for the video.. it gave me the courage to try
Great video. Well done, thanks! I'd add a note that, on mine at least, the back is pretty tough to get started separating - it's a tight precision fit! Had to be patient and keep working at it with a very thin tool. I also had to use a small tip tool (my little Philips tip) to press down the sides of the battery connector till they clipped into place. Just pressing the connector down with my thumb would not lock the edges. cheers jt 😎
THE VERY FIRST THING TO DO.. is to remove sim &/or sd card. The outter edge of the sd card broke-off as I was snapping the back on afterwards. My bad- should´ve thought of it myself. Very good dyi video. -Cheers!
Fixing a screen on similar 7.0 thanks for the case crack video. Really wish you took it to glass repair as no one has yet. I'll be winging this thanks again for the important first step!!
Thanks for the video mate. Simple enough to follow and enough good information to get the job done. For anyone wanting to have a creak at this, I'd previously never attempted anything like this before and have limited tech knowledge. A few things I noted. A bit of common sense, moving past the fear of wrecking your tablet, that is probably not working right anyway otherwise you wouldn't be here, and patience got me over the line. I struggled getting the piece of crap plastic tool in place to get the back off. I broke the end off it. I used my fingernail to open the case far enough to get what was left of the tool in place. I used a blade to get the edge of the green tape up, slowly, being careful not to damage the ribbons. I did not put the green tape back on. When I lifted the locking tab things on the ribbons, I thought I had to pull the ribbons up to get them out. Turns out they just slide out not up. Getting the battery out of the chassis, I found I moved around all the corners trying to get one to click loose because I didn't want to force anything. Maybe I could have used more force but I'm a noob and wasn't sure. Once I clicked one up the rest were easier. Removing the battery lead was as the video showed. I initially looked for another lock thing that I had to lift but couldn't find one so turned the battery over and pryed the plug out. Putting the new battery back in was easy. The power plug from the new battery just pressed on, the same way it came off. The ribbons slide back in to where they came from and the locking tab thing that I lifted to get them out just presses down, evenly and gently, to hold them in place. I used the plastic piece of crap too to make sure it went down evenly. Put the screws back in and it really is that simple. Before I put the back back on, I powered mine up to check it first. It was fine, no information or anything lost. I powered it down and fully charged it with the back off. I wanted to see if the new generic battery got overly hot or went bang or puffed up or something before putting the back on. It was all good and literally saved my tablet. Couldn't have,or rather, wouldn't have, done it without this video.
While power is off holding power button + volume up + home button will bring device into recovery mode. Just make sure if you hard reset and wipe it, it will basicaly reset to factory default and remove any firmware updates meaning if you say have upgraded to 5.0 it will down grade it to what ever it was initaly installed with. Might fix some booting problems , never had to try this but might work Just a thought.
I still use my metal iSeasemo Ultra Thin Steel Pry Tool! I'm just sure to get beneath the screen and pry up the entire LCD assembly. Metal Pry Tools can do alot of unnecessary damage if you do not proceed carefully. You are wise to mention this. I can't get nothing done with those elcheapo plastic safe pry tools. Waste of time. You want mine you can have them.
Great video, but you only covered 1/2 the job. There were a few hitches putting it back together, which would have made it nice if you had shown how you put the new battery in. Do you put the old tape on (mine wouldn't stick so I used some Scotch tape) and which way the 3 wire clamps are pushed down.
Is it important to put that green tape back on? I replaced the battery in my husband’s Tab 4 but forgot to tape the stuff back. Is it insulating or something? Thanks - great instructions and the Tab works great!
Looks easy to change the battery. I just bought one off ebay cheap and the battery dies within a couple of hours use and takes hours to charge. Just need to buy a genuine battery and not a fake.
What are the dimensions of the battery? I may want to order on Batteries Plus. After you have taken the screws, there are those gray "snap" tabs; you seem to just run the tool under the tabs- it it that easy? Thanks for the confidence.
Will this help to reboot the system, to unplug the battery and the plug everything back in? I have a black screen and have already tried unpluging the LCD cable and plugged it back in. Just wondering if this process with help.
So I have the same tablet and so part of the battery is like puffed up not much do and it’s not the one that has te trash picture is the one next to it/stuck to (the one with the little bar code)
I'm having trouble finding the battery for model #CE0168 - galaxy tab 4 10 inch screen. If I let my battery get below 70%, it takes 2 days to charge it. It has always been like this, so I thought replacing the battery would be a good idea - I just can't find one. There's plenty for the tab 3 - would that work?
MY TABLET IS STUCK ON THE DEAD ANDROID PAGE - "NO COMMAND" WILL NOT RESPOND TO FACTORY RESET/WIPE OR SNYOTHER CHOICE. PUT IN FREEZER OVER NIGHT CUZ IT WOULD NOT TURN OFF. AM THAWING IT OUT SO I CAN GET BATTREY OUT. IF I TAKE BATTERT OUT & BACK IN SHOILD I CHAGE IT FIRST OR TURN IT ON TO SEE IF IT WILL NOT GO BSCK TO THE DEAD ANDROID SCREEN? IT STARTED WHEN I WAS RESTARTING MY TABLET & IT CAME TOTHE PAGE I NEVER SEEN BEFORE. PLEASE HELP IF POSSIBE... IF IT DOESNT WORK ITS DEAD RIGHT? SAMSUNG SAID TOO OLD TO HELP/ GET PARTS. THANKS!
Thanks for the video, but this seemed like sparing the good parts of a broken tablet rather than replacing the battery as the title suggests. In my case, my tab's battery lies about being 100% full, but as soon as I unplug it, it drains to 0 in matter of minutes or even seconds. I have tried different cables, but no difference whatsoever!
Ron B Yeah, I have 2 and one of them is discharging very quickly. Not quite as fast as you, but much faster than the other tablet with the same games and things. Probably 2-3 times as fast.
You could check local small computer shops. Try wandering through a dollar store or pottery/craft store and you might find something that will work for literally $1. When doing pottery you'll often use hardwood tools to carve designs or letters out of the clay before firing. If you don't have an assortment of "computer tools", you can buy something like a VisionTek 12 Piece Computer Toolkit which includes a pry tool. Very handy, smaller insulated set of tools that will last you a lifetime of electronics repairs (home, mobile, automotive). Tiger Direct for example carries that particular tool kit.
In a world full of lame, poorly shot instructional videos that dont really show anything useful, this was PERFECT...thank you. Nicely done
Brian Demers I turned off the volume and followed along replacing my battery at the same time. It was very easy to watch and follow. I can't imagine what you are not able to understand.
Janet Gale he Just said that the vid was perfect
Finally a video without music so I can actually listen to what’s happening
Seriously dude. Thank you do much for this video. I was having difficulty because the battery was slightly out of place. I was afraid I would have to purchase a new one even though I am still on a plan. All I needed to do was open it up and reconnect some things. Again thank you so much. You saved me money and time. Absolute hero.
Very helpful! Stopped using my Galaxy Tab 4 because it doesn't hold a charge very well. And, I just ordered the batter for it that comes with a set of tools! Although I have a PC workstation I built and a MacBook Pro, getting the use of the Galaxy Tab 4 back into my tech quiver is something I've been needing for a while.
how about a link to the battery and tool kit?
Thanks in Advance
Yazmin
Thank you very much for sharing this ! I replaced my battery in no time (without breaking anything !)
Very generous of you !
Thanks a lot for super clear no nonsense video.Fixed mine. Important,when taking cover off, do it as you do, slide the flat edge along and it will pop up avoiding cosmetic case gouges. I used fine flat screwdriver, and a thin kitchen knife to pop off the connecter cable connectors inside.
vastly better than the totally crap printed and badly shot instructions that came with my replacement battery. if I had seen this video first, I would not have spent
hours cracking the slate open and buggering up the seams in the process. and gotten the ribbon cables connected right, THE FIRST TIME.
THANK YOU!
Worked a treat to replace my TAB 4's swollen battery. Only things to add from my experience is the back cover was harder to get off than it looked in the video and I had a couple of extra bits of tape holding the cables down which needed taking off before opening the cable clamps. Great helping video. Thankyou.
Thank you, just replaced mine by watching this video😁
Where did you purchase your replacement battery? I have seen some on Amazon. There is a broad range of prices. Thanks for your help?
Excellent tutorial. Exactly what I need to replace my battery. Thanks.
thank you for the video tutorial...I would like to add 1 thing: it is a better idea to use a plastic safe tool or device other than a metal pry tool to unclip the battery plug. As I unclipped it from underneath as shown, I saw a very small spark. Thankfully no damage, but it doesn't take much to ruin electronics. Just a small tip... thanks again.
Great video! Took me about 20 mins.. Bought my battery kit and tools from A1 parts Quebec, Canada, but there was no instructions so this was very helpful
I just did my daughter's... didn't even need to unplug those ribbon wires.. unplugged it, took screws out.. popped it loose and slid it out the side... 10 minutes done.. thanks for the video.. it gave me the courage to try
Alabama
Thank you Sir, you have a great tutorial! I got my Tab 4 open and the battery taken out.
Very nice tutorial. Well explained and concise. Thanks.
Thank you, I couldn't have done it without your help. Your video made the job so easy to do, a change of underwear was a small price to pay.
it works perfectly...thankyou very much....
cant believe i fixed it by my self...thankyouu
Great video. Well done, thanks! I'd add a note that, on mine at least, the back is pretty tough to get started separating - it's a tight precision fit! Had to be patient and keep working at it with a very thin tool. I also had to use a small tip tool (my little Philips tip) to press down the sides of the battery connector till they clipped into place. Just pressing the connector down with my thumb would not lock the edges.
cheers jt 😎
THE VERY FIRST THING TO DO.. is to remove sim &/or sd card. The outter edge of the sd card broke-off as I was snapping the back on afterwards. My bad- should´ve thought of it myself. Very good dyi video. -Cheers!
Great video again..referenced it when putting in new battery and now its like my daughter has a new notebook!!!
Thanks
I used a big push pin to pry the edge, then a thin blade
A bit tricky, but made it
New battery from Amazon $18
Thanks again!
Great video. I followed the instructions and for the first time ever trying something techie..... It worked perfectly. Much appreciated 👍👍👍
Fixing a screen on similar 7.0 thanks for the case crack video. Really wish you took it to glass repair as no one has yet. I'll be winging this thanks again for the important first step!!
Me too 😂
Very usefull and easy to follow. Thank you.
This video helped me remove the back panel and let me reconnect a glitching gfx cable. Thanks!
Thanks for this. Going to try once battery comes in
thank you for the video.. looks pretty easy. I need to do replace the battery in my daughter's.. 2 hours and it's dead
thank you! I just replaced my battery with your clear video.
Perfect, right to the point. Thanks for your time for posting this. I wish all helpful videos could be as good.
Thanks for the video mate. Simple enough to follow and enough good information to get the job done. For anyone wanting to have a creak at this, I'd previously never attempted anything like this before and have limited tech knowledge. A few things I noted. A bit of common sense, moving past the fear of wrecking your tablet, that is probably not working right anyway otherwise you wouldn't be here, and patience got me over the line. I struggled getting the piece of crap plastic tool in place to get the back off. I broke the end off it. I used my fingernail to open the case far enough to get what was left of the tool in place. I used a blade to get the edge of the green tape up, slowly, being careful not to damage the ribbons. I did not put the green tape back on. When I lifted the locking tab things on the ribbons, I thought I had to pull the ribbons up to get them out. Turns out they just slide out not up. Getting the battery out of the chassis, I found I moved around all the corners trying to get one to click loose because I didn't want to force anything. Maybe I could have used more force but I'm a noob and wasn't sure. Once I clicked one up the rest were easier. Removing the battery lead was as the video showed. I initially looked for another lock thing that I had to lift but couldn't find one so turned the battery over and pryed the plug out. Putting the new battery back in was easy. The power plug from the new battery just pressed on, the same way it came off. The ribbons slide back in to where they came from and the locking tab thing that I lifted to get them out just presses down, evenly and gently, to hold them in place. I used the plastic piece of crap too to make sure it went down evenly. Put the screws back in and it really is that simple. Before I put the back back on, I powered mine up to check it first. It was fine, no information or anything lost. I powered it down and fully charged it with the back off. I wanted to see if the new generic battery got overly hot or went bang or puffed up or something before putting the back on. It was all good and literally saved my tablet. Couldn't have,or rather, wouldn't have, done it without this video.
ih like you
Great instructional video.. well explained and not rushed. Thank you for the upload
well thank-you very much. now I need to locate a new battery. thx again.
I found batteries on EBay
Thank you. You just saved my tablet.
Nice! This is a good start; need to replace a broken screen. This helps
Thanks, took me 10 minutes and never did anything like that before.
Made it look simple. My go next. Many thanks.
Thank you for the Video
VERY VERY HELPFUL.
While power is off holding power button + volume up + home button will bring device into recovery mode. Just make sure if you hard reset and wipe it, it will basicaly reset to factory default and remove any firmware updates meaning if you say have upgraded to 5.0 it will down grade it to what ever it was initaly installed with. Might fix some booting problems
, never had to try this but might work
Just a thought.
Astro Funk Man thank you
+Astro Funk Man this trick actually seems to be working its downloading...i guess well see
+Astro Funk Man how long is it gonna say downloading dont turn off... its been on same screen for about 10 minutes
you are in wrong mode, please hold power button for 8 secs to reboot at any time
Astro Funk Man
great teacher great tablet 100%
Easy to follow,good video
Wish you had shown putting new battery in, especially the connection. :/
It's Just in reverse it's Just a click connection
Thank you , so useful your explications .
Thx...worked like a charm.
Very nice and safety idea
Thanks you save my Day
Thanks. Great and easy to follow.
I still use my metal iSeasemo Ultra Thin Steel Pry Tool! I'm just sure to get beneath the screen and pry up the entire LCD assembly. Metal Pry Tools can do alot of unnecessary damage if you do not proceed carefully. You are wise to mention this. I can't get nothing done with those elcheapo plastic safe pry tools. Waste of time. You want mine you can have them.
Great video, but you only covered 1/2 the job. There were a few hitches putting it back together, which would have made it nice if you had shown how you put the new battery in. Do you put the old tape on (mine wouldn't stick so I used some Scotch tape) and which way the 3 wire clamps are pushed down.
You've done a REAL good job
Thanks and goog New year 🎆
Is it important to put that green tape back on? I replaced the battery in my husband’s Tab 4 but forgot to tape the stuff back. Is it insulating or something? Thanks - great instructions and the Tab works great!
Great video thank's 👍
Looks easy to change the battery. I just bought one off ebay cheap and the battery dies within a couple of hours use and takes hours to charge. Just need to buy a genuine battery and not a fake.
thanks man, that really helped!
Thanks, but was there anything special about reconnecting the locks?
Super instructions! Thanks!
Thanks a bunch! It worked fantastic.
Excellent video thanks 👍
Thank you! What did you call that long metal tool that you were using?
Great tut. Thank You.
That was easy to do, but thx for the guide
Thanks for the video. Do you know if the tablet can be run via AC only if the battery is taken out?
Great guide video.
You make it look so easy to open. Its a f*&^ing pain!
great job
good job-thanks buddy.
Thanks, it helped me a lot!
What are the dimensions of the battery? I may want to order on Batteries Plus. After you have taken the screws, there are those gray "snap" tabs; you seem to just run the tool under the tabs- it it that easy? Thanks for the confidence.
Just wanted to be sure. Thanks!
Will this help to reboot the system, to unplug the battery and the plug everything back in?
I have a black screen and have already tried unpluging the LCD cable and plugged it back in. Just wondering if this process with help.
Thank you
My tablet has been through hell hope this will work
Thanks.
Thanks mate big help.
I manage to change my tab 4.
Like & subscribe 👍
Please can you make a video of a screen replacement for galaxy tab 4.7.0
very underrated
thank you for share
Can you please inform me of the name of the tools that you used In the video?
Thnx for the tips
Thanks
So I have the same tablet and so part of the battery is like puffed up not much do and it’s not the one that has te trash picture is the one next to it/stuck to (the one with the little bar code)
+Mobile Repairs what tool is it called the one u use to open the tablet
where did you purchase your tools? Looking for source of durable high quality items.
I'm having trouble finding the battery for model #CE0168 - galaxy tab 4 10 inch screen. If I let my battery get below 70%, it takes 2 days to charge it. It has always been like this, so I thought replacing the battery would be a good idea - I just can't find one. There's plenty for the tab 3 - would that work?
MY TABLET IS STUCK ON THE DEAD ANDROID PAGE - "NO COMMAND" WILL NOT RESPOND TO FACTORY RESET/WIPE OR SNYOTHER CHOICE. PUT IN FREEZER OVER NIGHT CUZ IT WOULD NOT TURN OFF. AM THAWING IT OUT SO I CAN GET BATTREY OUT.
IF I TAKE BATTERT OUT & BACK IN SHOILD I CHAGE IT FIRST OR TURN IT ON TO SEE IF IT WILL NOT GO BSCK TO THE DEAD ANDROID SCREEN? IT STARTED WHEN I WAS RESTARTING MY TABLET & IT CAME TOTHE PAGE I NEVER SEEN BEFORE.
PLEASE HELP IF POSSIBE... IF IT DOESNT WORK ITS DEAD RIGHT?
SAMSUNG SAID TOO OLD TO HELP/ GET PARTS.
THANKS!
thnks alot it works
شكرا رحمالله والديك
does any part of this replacement part connect to the recent and back buttons?
thanks bro
i have problem with overheating with my tab 4......do hou have a solution or a video for my problem ??
Thanks, unfortunately my piece of crap prying device just snapped in half when I tried to get the cover off. Guess I'm screwed!
Thanks for the video, but this seemed like sparing the good parts of a broken tablet rather than replacing the battery as the title suggests. In my case, my tab's battery lies about being 100% full, but as soon as I unplug it, it drains to 0 in matter of minutes or even seconds. I have tried different cables, but no difference whatsoever!
Yes me too
Ron B Yeah, I have 2 and one of them is discharging very quickly. Not quite as fast as you, but much faster than the other tablet with the same games and things. Probably 2-3 times as fast.
you need to watch it again if that's what you think
watch what he does then put the new battery back in reverse order. it couldn't be any easier
Great video!
Great Thanks !!!
good thx..
which cable is the LCD cable?
Can i use a screwdriver ?
where can i find one of them pry tools?
You could check local small computer shops. Try wandering through a dollar store or pottery/craft store and you might find something that will work for literally $1. When doing pottery you'll often use hardwood tools to carve designs or letters out of the clay before firing.
If you don't have an assortment of "computer tools", you can buy something like a VisionTek 12 Piece Computer Toolkit which includes a pry tool. Very handy, smaller insulated set of tools that will last you a lifetime of electronics repairs (home, mobile, automotive). Tiger Direct for example carries that particular tool kit.
My tab is not getting onn when I press power button it get beeped but didn't get opened .what I should do??
How to insert second sim in samsung galaxy tab 4