Homder Stud Finder Sensor Wall Scanner Review, Versatile stud finder with active live wire warning

Homder Stud Finder Sensor Wall Scanner Review, Versatile stud finder with active live wire warning
✅ Amazon Shop Link: www.amazon.com...
✅ International Shop Link: s.click.aliexp...
Disclosure: Links contain affiliates. When you buy through one of our links we will receive a commission. This is at no cost to you. Thank you for supporting and allowing us to continue to bring you valuable content.

[@myalways5052]

Just bought a dienmern stud finder on amazon, searched for a tutorial on that one and this was the second result. Minus the case, it's pretty much identical, the 5 modes and little icons, same LCD screen and same working function.
I was holding the calibration button the entire time 😂 learned what I needed to know, should now be able to install my TV Bracket/mount
Perfect little tutorial, thank you!

[@MsMary-mg3ho]

This was exactly what I was looking for - it worked just fine when I used the 1" mode. Thank you!

[@zackhill209]

You're welcome!

[@jennifer17032]

Thank you SO much for this tutorial!

[@Waybear]

Had to switch to 1.5" to make it work, thanks for the tutorial!

[@zackhill209]

You're welcome!

[@dougmanor1988]

Just got my $16 TH550 from Amazon and it appears to work just fine.It is just like yours but it has the 2 buttons on the face and the calibration button on the side.One face button is for on and off and the other is for the mode.Mine doesn't pick up much on the 1/2" either,you have to switch it to 1".

[@mrlonslo6472]

Appreciate the tutorial 👊🏾🙏🏿

[@zackhill209]

You bet

[@IamTheGreatCornholioo]

What if you start calibrating where the wires are?

[@rfishy9]

thank you, can you tell me if this device works on plaster wall also ?

[@CrisostomoIbarra1989]

Thank you Sir!!!!!

[@Lunal0v]

So I noticed the red light was on all the time. Does that mean where ever you are scanning there was a live wire ? What’s the purpose of the red light being on if you are scanning the wood/studs?

[@scorp1o03]

That's what I wanna know

[@thomaskemil64]

Me too. Has anyone figured why the red light was on?

[@Haveron37]

The red light is on to show its checking for any live wires in the wall, it's constantly scanning in the various available modes and flashes if it finds them

[@oliviastork1811]

I just read the manual and no, the light won't flash when a wire is detected. It should turn on when a wire is detected. If the live wire light is always on, that means you calibrated on top of a live wire.

[@Attilat]

Is there a reason that my 1/2 depth and 1' depths mark different places (half an inch or so difference)? Where should I drill?

[@morenowg]

Thank you!! Most helpful.

[@zackhill209]

Glad it was helpful!

[@RETUSAF1995]

Just brought it on Ebay $20.00.

[@5dwolf22]

Its terrible, very inconsistent. Gives me different results every swipe. Sometimes it detects the studs to be like 12 inches wide. Complete garbage

[@dayinthelifewkyl6102]

good clean video👍🏽

[@zackhill209]

Thanks for watching

[@frankjanas594]

How do you turn it off?

[@bradleynorych5349]

turns off on its own when you leave it alone

[@NUTbU5T3R]

You can also hold the "mode" button

[@sergemaurais1899]

Junk