How To Build A Wood Log Store
ฝัง
- เผยแพร่เมื่อ 19 เม.ย. 2015
- Step-by-step instructions on how to build a wood log store to help your logs and kindling wood dry out all year round. DIY expert Craig Phillips builds this attractive and simple wood store that would look great in any garden.
TOOLS YOU'LL NEED:
Quick Clamp - goo.gl/wBMoHf
Combination Square - goo.gl/G1qyqH
18V Combi Hammer Drill- goo.gl/XHuhYe
Tape Measure - goo.gl/AxQRwB
#diy #woodworking
SUBSCRIBE:
th-cam.com/users/subscription_c...
TWITTER: / silverlinetools
FACEBOOK: / silverlinetools1
Silverline Tools How To videos are for reference purposes only. Undertaking these projects is entirely at your own risk.
Read safety instructions before operating any power tools and always wear eye protection. - แนวปฏิบัติและการใช้ชีวิต
Just finished my first Log store build using this method and I have to say i'm super pleased with the result. Pretty straight forward to build and the results are great. The best part for me was that it was fun to build - Good Job Craig!
Thank you! This video is so clear co pared to others I have watched AND it's edited for speed to get to the nitty gritty of what tool to use and where to use it.
Think I'll base my design on this. But with maybe a 6" overhang on the front so the water isn't likely to drip down on to the logs underneath
Excellent vid, roll on the weekend 👍
çok güzel bir anlatımla iyi ornek bir ahşap çalışması olmuş çok teşekkürler öğretici Gideon için.
Just completed my first log store based on this video (different size) but very helpful. Thanks!
And might be a good idea to inform on how to make sure the angle on both side panels is equal. Looks like it's done by eye
Great vid. Thanks. Accents are always nice too.
Brilliant vid… Craig lad,
Nice design, thanks. The layout of the floor means you aren't having to screw into end-grain, which is what I was about to do with a different design!
Brilliant video, I'm an average diyer, it took me the weekend to do it but it looks great, I came back to the vid a few times to check things, measured twice cut once and all that. Some stuff was a bit of a challenge like the angles for the roof but i worked it out myself and I'm well chuffed. Where would I get the liquid from that you painted it with at the end please?
Super !!!
Very good video Craig , start to finish info on the roof subframe would have been more helpful , ie : is the subframe square or constructed at the same angle as the roof sides ? This hasn’t been explained , I know what you were doing but remember you are talking to people that have never attempted it , any minor details missing could stop some one trying ?
Just finished this project quite straightforward to follow.apart from the Side angles for the roof. Which I didn’t understand how you work it out. Had to get the angle from another TH-cam video. Apart from that good project. Came out well.
What angle did you determine the roof should be?
Very good!
Thanks
Are there plans for this somewhere? Like a cutlist?
Is there a specific drill bit you should use to drill the pilot hole? At the moment I just use brad point drill bits. I'll be attempting to build this, this summer (just had a log burning stove fitted)....as I don't have a great deal of tools there will be a LOT of sawing!!
thank you jamie carragher
Excellent Bro, am living in Napier NZ and will make a smaller version for my decking fire pit... easy as... cheers
Awesome, send us some pics! we'd love to see how you get on!
@@SilverlineToolsTV Have taken two pics how do I get them to you? Cheers Lawrence
He’s great and really creative is Neil Buchanan!
Lol 🤣🤣🤣
Doesn't mention the dimensions of some of the timber used, only that of the side panel frame.
Really easy video to watch. Sod the sawing though it's a mitre saw for me!!!
Thanks, let us know how you get on!
Hi, would you mind letting me know what size diameter the screws that I should use? The video is great!
Hello Craig. Good video. What is the wood preserving did you use. Thanks Steve 👍
Can you explain your roof frame a little better? You just popped it on there and we didn't get to see you take any of the measurements. How would I tackle this part?
I suppose it depends on the size of your log store
Could live in that ..
This is the easiest ever!
Are there any plans 4 this one?
Useful video. Lots of negative comments below. What's not to like. If you can't build it from Craig's description, you maybe need to go and buy one.
is it best to use treated or natural timber? thanks
You screw the slats in flush to the ends of the sides at the start, but when you asemble there's a gap?
Get video thank you
I'm glad this young man is now doing something useful with his life
Any chance you can give me the exact materials use and lengths I need to order to make sure I have enough. Going to be my first build so want to make sure I order enough materials
Do you have bild a loft bed ?
Like this design. Was disappointed to learn one can’t easily find the feather-edge boards in the US :-(
is that saw blunt?
Would rain get in through the gaps and fall on logs?
Sure would do mate, plus no over hang on roof means useless logstore😉
Good video - bit confused by your dimensions though - 900mm high, 600mm wide and 24mm depth - it is far wider than 600mm and assume you meant 240mm depth - but it looks far deeper than that
What size is the log store please
Anyone else think he should use the 18v for the holes and the 10.8/12v for the screws
No
Confused on the bit when he saws the side then add another piece on top :(
Same here ?????
Wonder how many tools he went through making that. Silver line are like toffee
Might be a wise idea to mention that you need to let the wood season and dry first before using it, if not done already. 2-3-4 years is ideal, depending on what firewood you'll be using (hardwood, softwood,....) and how thick the logs are (splitting it will help them dry faster and more evenly).
Otherwise, nice idea, one that I'll be using! I have some good chunks of left over pallet wood that is laying around. Gonna make one, but a taller one, for my 84 year old mum, bless her soul. That way I can stack her firewood nicely next to her front door (that is protected from the overhanging roof of her house) and she doesn't have to walk outside thru snow, rain and storms and drag logs of wood all across the backyard. ;)
Cheers!
How come you made the roof tilt toward the front. The snow will come off and pile up in front of the the wood then you digging out.
If the pitch was down toward the closed backside of the rack, you wouldn't get to see the roof slats from the front. Just wouldn't look as nice up against the house. So I guess its a matter of what's more important to the builder: looks or function. Me? I favor function and probably a majority of the guys do. But we've got wives too, haha.
Don't get that much snow in UK!
How can wood dry when exposed to rain (especially, wind blown) here in the Greater Seattle area of Washington State, U.S.A.?
Craig i followed the instructions but when i cut my timber i followed the instruction and did what you did and held my timber like you did 1:21 but i slipped and cut my hand off because you didn't use the clamps provided so now a can only hug my children with my replacement hook hand... i hope you are happy, i get called captain hook when i pick my children up from school... this comment is a troll but for some individuals its a reality. Be safe people. use the clamps provided if you don't want to cut your hands or fingers off.
so, 24mm in depth? Is this a match box?
he ment inchs
design for the side panels changes half way through the build - or did i miss something? - look at far end of side at th-cam.com/video/JqoGX-z7Ehs/w-d-xo.html ... then when he stands it up.... ?
Since I read “pepe amazing plan” (Google it), I do think nothing will ever surpass it as a great woodworking book. The text is easy to read and the pictures and drawings outstanding. I look at this book a "must have" because it gives a wide range of information on just about everything coping with wood working and does it very well.
Looks okay but he put the roof frame on upside down lol..........
Some continuity problems and lack of precise explanations
The side panel he starts with is different to the one he ends up with !
If you are are DIY newbie, a bit difficult to follow....
Sod the hand saw, use the circular! 😂
Will definitely save you some time
When using a compound miter saw hold your piece of wood down with the provided clamp, don't use your hand like Craig Phillips unless you want to have no fingers afterwards. 1:21 Safety first kids
I thought that. What a numpty.
And then you lay some “unsplitted wood” in it ?
If your 3ft tall (tiny person) it's an ideal logstore, obviously needs more over hang on the roof as water will just drip and soak all the logs
I do receive for groceries from Humana sorry
"top secret idea and perfect line included in thi guide"? Haven't they taught bots to speak English yet?
Great video but would be easier if measurements were metric for those of us not still in the 1960s!
He's not even a tradesperson
I don’t know if you’ve heard, but Hyezmar is giving his collection of woodworking plans on his website. There’s an excellent alternative for this project!
OMFG.. how of a big deal is to make what this guy just did in the video? :))) Is just a box with a side panel removed.. :)))
Because some people have no idea on how to assemble basics, thats why youtube is rammed with how to videos. Everyone is different, even down to their skill level, whilst someone may not be able to assemble a wood store, they may be genius at brain surgery.
Talking seems so hard for scousers
Useless video with no cut list or plans available
I check a lot of woodworking handbooks. These one from woodprix are the best.
I have spent months researching into building sheds and discovered an awesome resource at Wilfs Shed Formula (google it if you're interested)
You may go to woodprix website if you'd like to make it yourself guys.
Im using woodprix instructions to make it and I do it already :)