Damn Eli, where was your video about 3 months ago? It didn't come up on Tubes and you aren't on eBay. I've already did minds but the time that it took to learn how to remove them was a lot. If I have found this video in my search it was have been completed in 1 day instead 3 or 4 days.
Life Happened, lol Thanks for the awesome comment, it definitely made my day. We have so many more removal videos so If you ever find yourself in a similar predicament, you know where to find us now!
The back seat belts on that vehicle should be just regular non-pretensioner seat belts. You can just check to see if they are locked or if they work properly as they should. We can rebuild seat belts if they are bad or locked, not working correctly.
I was looking to install a subwoofer in the center seat until I saw that module. Is that something that might disturb it with the magnet and vibrations? Hate to have my airbags go off when the beat drops! TIA!!
This is a very interesting question. Yes, the vibrations might cause the roof and side airbags to go off. Yes for sure it might be a bad idea to install a subwoofer in the center sear area next to the airbag computer.
Good morning, I just bought a Silverado 2016 which has the front end wrecked and the steering wheel airbag is deployed. Im going to replace that but, my question is, do i meed to replace this module too? Or ill find that out once i put the new airbag?
I will send in the airbag module, and both seatbelt and lower anchor tensioner to get them repaired, however im planning on replacing dash airbag and steering wheel airbag also and i wanted to ask if it doesnt matter if i install different airbags or used undeployed airbags ?? will it erase the airbag light if i plug everything in after i get the module back? or do each of every airbag has to be programmed also?
@@MyAirbags Okay one question by changing airbags will the module deploy them if it detects a new airbag?? im scared to plug in the connector and once i plug the battery it will deploy
@@alanfelix79 just make sure the module is bolted down with ALL bolts. Because most of new modules are plastic and it needs to be bolted down with all bolts. If not then roof airbags will deploy as it will think the car is flipping/roll-over.
This is actually one of most common question asked. Yes the vehicle will still run and drive without the airbag module, of course do it at your own risk, air bags and SRS system wi not work properly unless the air bag light is off. Also check your seat belts to make sure they work. If they don't work properly or stuck, we can rebuild them. For airbag module reset www.myairbags.com/product/airbag-module-reset-3/ For seat belt repair www.myairbags.com/product/seat-belt-repair-1-stage/
Quick question. So my 2014 silverado just had the airbag recall done, and now the ventilation system doesn't work. Blows really loudly, but nothing comes out the vents and sounds like stuff is moving around the dash. Is this even possible? Is there a video that shows how the airbag recall is done on this truck? The dealer is taking no responsibility of course
I have a 2009 chevy silverado hybrid 1500 that had a air bag error. It said that the drivers side rear sensor was bad. we replaced that and still can't clear the code. it was replaced with a OEM sensor. It appears that the module is at fault. 2 things. what do you charge to reset the module? Also can the vehicle be driven without the module until it's returned from repair? Finally, what's the turn time on the repair?
Hello Robert! For your 2009, yes you can drive your Silverado without the module installed - your vehicle should operate fine. Here is the link to our service page, which should answer your other questions. Cost and service time can vary depending on when you need it back. Please feel free to reach out with any more questions you may have! www.myairbags.com/product/airbag-module-reset-3/ Our community forum: forum.myairbags.com/?wpfs=silverado+module
Airbag module reset is $59.99 and seat belt repair is $89.99. But there is a 2nd piece for the seat belt that could have gone bad as well. It is the lower anchor tensioner that is located on the seat, next to the door. Take a look at it, its most likely bad as well. Send that part as well and we will take cate of it. Here is more info: www.myairbags.com/product/airbag-module-reset-3/
If the seat belt is bad, then usually the airbag light will be on. Also, same for the airbag control module. After vehicle is in collision/accident then seat belt will be locked and not work correctly. MyAirbags can rebuild the seat belt and reset airbag control module.
Hello! Quick question. When the seatbelts are repaired after being locked up, will they lock up again in the case of a future accident? Or is the tensioner completely removed?
That is a really good question. We have heard of some people/companies throw away all internal parts away and just make it a regular seat belt instead of a pretensioner seat belt. When we repair it, we use all OEM parts and replace all bad/failed parts, that is including the pyro sensor (tensioner) part. Yes it will work as the seat belt was designed to work. Here is more info www.myairbags.com/product/seat-belt-repair-1-stage/
@@MyAirbags I love to hear this. Quick reply! You got my service. Setting up my order on Monday for my 2014 Silverado. Will need both seat belts and the module reset. Went hardcore off-roading and it set off my curtain air bags so I’ll be replaced those as well.
That is a great question. We did reset GMC/Chevy airbag control modules for vehicles under year 1998. We have stopped doing them because it is hard to get replacement chips/mcu's for these modules.
My pet peeve when looking for straight forward answers is when the presenter prefers to hear themselves talk instead of getting right to the information needed. All I can say is thank God you can skim a video on TH-cam.
Roberto, the original impact sensors are ok to use unless they are physically cracked, damaged or if you are getting a code for it/them. Even then, make sure they are mounted correctly and firmly. If you need to replace them visit our MyAirbags HELP center here: myairbags.zendesk.com/hc/en-us/articles/360001391787-How-to-Change-SRS-Impact-Sensors
Rick, We do ship parts to all Countries. But, seat belts must be mailed back to USA address only, because they are considered Hazmat Class9, Dangerous Goods, just like airbags. Otherwise, yes, we do ship all of the other parts internationally to all countries.
There is a lot of different DTC codes for that and they are different based on year, make and model of the vehicle. But the code description is usually one of these: 1. Circuit open for Seat Belt Pretensioner 2. Seat Belt Pretensioner Too High 3. Usually any fault code for seat belt, pretensioner or buckle.
@@MyAirbags thank you so much for your quick response! You’ve got a new suscriber!! One more last question. I seen someone on the comments if it was ok to drive without the module. You said, it’s dangerous and anyone doing it would be on their own risk. But my question is. If you take the module out completely, will the air bag light still be on the dash? Thanks!
Moises Martinez, The deployed airbags would need to be replaced. The module can be reset instead of buying a new one. Reset service for your original module can be ordered here: www.myairbags.com
i have a query guys please help me i want to program Airbag module in GMC Yukon 2016 i want to program old airbag module in the car can we do it through SPS because i am trying it i am getting error. If i program new module it is successfull but if i try to program the old or used airbag module in the car i am getting problem please help me out
I have a 2016 GMC Sierra Denali, vehicle was in a side colission. Airbag light is on and seat belts are locked. The SDM has a stored fault code B0052 - Deployment Commanded. Tried to clear this code and it does not go away. I see that you service clears crash history and crash codes. I want to send you my SDM airbag control module and seat belts, because they are locked as well. Where do I send it? How long will it take?
Hi John, we are more than happy to help you with this project. We can do both the SDM (airbag control module) and the deployed seat belt pretensioners. Once we receive your parts, we send them back out to you within 24 hours. Start your service order here: www.myairbags.com/
So with out the module you said the vehicle would still run but not safe. But, will the airbag light still be on on the dashboard or it would be gone? Thanks!
John, the seat belts can be completely refurbished. The module can be reset as well. We have have been in business 2006, helping our customers save money on this exact issue. You can start the service order here: www.myairbags.com Here is the seat belt repair link www.myairbags.com/product-category/repair-return/seat-belt-repair/
Yes, we can rebuild your seat belt! We can change the cut seat belt and check the mechanics to make sure all parts are working. We have all the parts needed for the repair. Here is the link to get started www.myairbags.com/product/webbing-replacement-dog-cut-ripped/
Yahir, After an accident, it is very probable that the seat belt has deployed. There's more than one way to know for sure. One very clear way is just to see if the seat belt is locked up. Sometimes belts are deployed but can still move. In those cases, you can still find out by scanning the car with a scan tool or you can also remove the belt and check resistance with a OHM meter as we show in this video here: th-cam.com/video/A2iqMqdbb5U/w-d-xo.html
I have airbag light on.. In Silverado 2015.. When scan it shows B0012 D01. Steering wheel air bag deployment loop high resistance DTC history status : History DTC current status : Current MIL status : Requested What does this means and how to fix it?
Looks like problem is with the driver airbag. Issue could be with: 1. Bad clockspring that is behind the driver airbag 2. Loose driver airbag connector 3. Bad driver airbag If vehicle was in an accident/collision, then we can reset the airbag computer module and rebuild seat belt pretensioners at myairbags.com
Airbag Module Reset for Nissan Altima 2013 is $69 and Seat Belt Pretensioner Repair is $75 each. www.myairbags.com/product-category/repair-return/airbag-module-reset/
Nick, we do have Russian speaking employees. You are welcome to contact us via phone, email or through our webiste: www.myairbags.com/ Thank you for commenting! We really appreciate it!
Yes this is a very common deployment commanded error code. Usually with this code, airbags did not deploy but the code got set. The SDM airbag control module needs to be reset. Here is more info on how to get your airbag module reset: www.myairbags.com/product/airbag-module-reset-3/
Seats or Seat Belts? Seats can be replaceable but look to see if there is a weight sensor on the seat. If there is make sure to remove the sensor from the old seat and install on the new seat. If you are asking about deployed seat belts you can start here: www.myairbags.com/product-category/repair-return/seat-belt-repair/
Reason for asking this is because I have a 2014 Silverado lt cloth interior and upgraded to a 2018 leather interior, everything works but the airbag light is on, on the dash, idk if the airbag wiring are different.
Ivan cortez, I couldn't find a way to turn it off so wat i did I just swap the covers, took off the leather cover and put it on my old seats driver and passenger side. Thats how I fix it. I went the easy way I guess.
Damn Eli, where was your video about 3 months ago? It didn't come up on Tubes and you aren't on eBay. I've already did minds but the time that it took to learn how to remove them was a lot. If I have found this video in my search it was have been completed in 1 day instead 3 or 4 days.
Life Happened, lol Thanks for the awesome comment, it definitely made my day. We have so many more removal videos so If you ever find yourself in a similar predicament, you know where to find us now!
I have a 2014 Silverado crew cab that was in a wreck, do the back seat, seat belts need reset also?
The back seat belts on that vehicle should be just regular non-pretensioner seat belts. You can just check to see if they are locked or if they work properly as they should. We can rebuild seat belts if they are bad or locked, not working correctly.
I was looking to install a subwoofer in the center seat until I saw that module. Is that something that might disturb it with the magnet and vibrations? Hate to have my airbags go off when the beat drops! TIA!!
This is a very interesting question. Yes, the vibrations might cause the roof and side airbags to go off. Yes for sure it might be a bad idea to install a subwoofer in the center sear area next to the airbag computer.
Good morning, I just bought a Silverado 2016 which has the front end wrecked and the steering wheel airbag is deployed. Im going to replace that but, my question is, do i meed to replace this module too? Or ill find that out once i put the new airbag?
Yes after vehicle was in an accident it will store crash history and SDM module (airbag module) needs to be replaced or can be reset.
Also check your seat belts and lower bottom anchor tensioner. We do rebuild them as well. Check out myairbags.com
I will send in the airbag module, and both seatbelt and lower anchor tensioner to get them repaired, however im planning on replacing dash airbag and steering wheel airbag also and i wanted to ask if it doesnt matter if i install different airbags or used undeployed airbags ?? will it erase the airbag light if i plug everything in after i get the module back? or do each of every airbag has to be programmed also?
Yes, you can replace the airbag with another used or new replacement, and the light will turn off. Airbags dont need to be programmed.
@@MyAirbags How long do you take to fix seatbelts and module? or how long will everything be
@@alanfelix79 It takes only 1 day for repair and few days in shipping. Check out myairbags.com
@@MyAirbags Okay one question by changing airbags will the module deploy them if it detects a new airbag?? im scared to plug in the connector and once i plug the battery it will deploy
@@alanfelix79 just make sure the module is bolted down with ALL bolts. Because most of new modules are plastic and it needs to be bolted down with all bolts. If not then roof airbags will deploy as it will think the car is flipping/roll-over.
Might be a dumb question but if I send the module in I won’t be able to drive the truck until I put it back in?
This is actually one of most common question asked. Yes the vehicle will still run and drive without the airbag module, of course do it at your own risk, air bags and SRS system wi not work properly unless the air bag light is off.
Also check your seat belts to make sure they work. If they don't work properly or stuck, we can rebuild them.
For airbag module reset
www.myairbags.com/product/airbag-module-reset-3/
For seat belt repair
www.myairbags.com/product/seat-belt-repair-1-stage/
I have a 2011 suburban has no communication with airbag module. Is this something that is common and means the module needs to be replaced
Was your vehicle in an accident?
@@MyAirbags the previous owner had some one hit the rear of the vehicle.
Quick question. So my 2014 silverado just had the airbag recall done, and now the ventilation system doesn't work. Blows really loudly, but nothing comes out the vents and sounds like stuff is moving around the dash. Is this even possible? Is there a video that shows how the airbag recall is done on this truck? The dealer is taking no responsibility of course
That sounds like a different problem. Perhaps they removed the vent and sid not assemble it back correctly?
I have a 2009 chevy silverado hybrid 1500 that had a air bag error. It said that the drivers side rear sensor was bad. we replaced that and still can't clear the code. it was replaced with a OEM sensor. It appears that the module is at fault. 2 things. what do you charge to reset the module? Also can the vehicle be driven without the module until it's returned from repair? Finally, what's the turn time on the repair?
Hello Robert! For your 2009, yes you can drive your Silverado without the module installed - your vehicle should operate fine. Here is the link to our service page, which should answer your other questions. Cost and service time can vary depending on when you need it back. Please feel free to reach out with any more questions you may have!
www.myairbags.com/product/airbag-module-reset-3/
Our community forum: forum.myairbags.com/?wpfs=silverado+module
Hey I have a 2014 Silverado and my seat belts are locked up from accident. How much to unlock and reset airbag module?
Airbag module reset is $59.99 and seat belt repair is $89.99. But there is a 2nd piece for the seat belt that could have gone bad as well. It is the lower anchor tensioner that is located on the seat, next to the door. Take a look at it, its most likely bad as well. Send that part as well and we will take cate of it.
Here is more info:
www.myairbags.com/product/airbag-module-reset-3/
Did you got it fix with them ? I got a 2016 silverado two seat belt lock up and i got a code on my dashboard
@@vkchikom3187 yes we repair seat belts, the process is fast and easy, visit myairbags.com
How can you tell if the seat belt pretentioner and seat module has been compromised without tearing it apart?
If the seat belt is bad, then usually the airbag light will be on. Also, same for the airbag control module. After vehicle is in collision/accident then seat belt will be locked and not work correctly. MyAirbags can rebuild the seat belt and reset airbag control module.
so this trucks don't have sensors on the front?
Hi Victor, There are impact sensors in front. Theres usually 2 of them, one on each side. They are mounted near or on the radiator support.
My Airbags do the sensors have to be replaced?
My 2001 Chevy Silverado airbag light came on and it says low voltage and it won't clear the code what do I do?
Thanks for the question. Can you reply with the exact code?
example B1001 or B1000...
Hello! Quick question. When the seatbelts are repaired after being locked up, will they lock up again in the case of a future accident? Or is the tensioner completely removed?
That is a really good question. We have heard of some people/companies throw away all internal parts away and just make it a regular seat belt instead of a pretensioner seat belt. When we repair it, we use all OEM parts and replace all bad/failed parts, that is including the pyro sensor (tensioner) part. Yes it will work as the seat belt was designed to work. Here is more info www.myairbags.com/product/seat-belt-repair-1-stage/
@@MyAirbags I love to hear this. Quick reply! You got my service. Setting up my order on Monday for my 2014 Silverado. Will need both seat belts and the module reset. Went hardcore off-roading and it set off my curtain air bags so I’ll be replaced those as well.
No
In Chevy isn’t necessary reset the airbag module. Of most of cases
Do 95-98 have a way to reset the airbag light?
Sorry C1500 Silverado
That is a great question. We did reset GMC/Chevy airbag control modules for vehicles under year 1998. We have stopped doing them because it is hard to get replacement chips/mcu's for these modules.
I have a 2019 TahoeZ71, the airbag light only comes on when its it's raining or when its damp. What could be the problem?
Corrosion on wire connections or fuse box due to water damage
Yes exactly 💯, thank you for providing an answer
My pet peeve when looking for straight forward answers is when the presenter prefers to hear themselves talk instead of getting right to the information needed. All I can say is thank God you can skim a video on TH-cam.
Thank you for feedback! We are starting to make shorter videos #shorts
Do I need to change front sensors if I have air bags and seat belts deployed??
Roberto, the original impact sensors are ok to use unless they are physically cracked, damaged or if you are getting a code for it/them. Even then, make sure they are mounted correctly and firmly.
If you need to replace them visit our MyAirbags HELP center here: myairbags.zendesk.com/hc/en-us/articles/360001391787-How-to-Change-SRS-Impact-Sensors
Seat position sensor under passenger seat?
Yes, the passenger seat position sensor is under the passenger seat.
Can a 2018 silverado start without the drivers steering wheel airbag?
Yes the vehicle will start and drive without a driver steering wheel airbag
Do you guys take modules and belts from Canadian customers
Rick,
We do ship parts to all Countries. But, seat belts must be mailed back to USA address only, because they are considered Hazmat Class9, Dangerous Goods, just like airbags.
Otherwise, yes, we do ship all of the other parts internationally to all countries.
Whats the code or light that comes on when the seatbelts deploy?
There is a lot of different DTC codes for that and they are different based on year, make and model of the vehicle. But the code description is usually one of these:
1. Circuit open for Seat Belt Pretensioner
2. Seat Belt Pretensioner Too High
3. Usually any fault code for seat belt, pretensioner or buckle.
@@MyAirbags thank you so much for your quick response! You’ve got a new suscriber!! One more last question. I seen someone on the comments if it was ok to drive without the module. You said, it’s dangerous and anyone doing it would be on their own risk. But my question is. If you take the module out completely, will the air bag light still be on the dash? Thanks!
Yes the airbag light will still be on if you remove the airbag control module.
I have a 2014 Sierra had some ugly seats and I swap for some Denali seats than the air bags pop how can I fix it
Moises Martinez, The deployed airbags would need to be replaced. The module can be reset instead of buying a new one. Reset service for your original module can be ordered here: www.myairbags.com
i have a query guys please help me i want to program Airbag module in GMC Yukon 2016 i want to program old airbag module in the car can we do it through SPS because i am trying it i am getting error. If i program new module it is successfull but if i try to program the old or used airbag module in the car i am getting problem please help me out
What codes/error are you getting?
I have a 2016 GMC Sierra Denali, vehicle was in a side colission. Airbag light is on and seat belts are locked. The SDM has a stored fault code B0052 - Deployment Commanded. Tried to clear this code and it does not go away. I see that you service clears crash history and crash codes. I want to send you my SDM airbag control module and seat belts, because they are locked as well. Where do I send it?
How long will it take?
Hi John, we are more than happy to help you with this project. We can do both the SDM (airbag control module) and the deployed seat belt pretensioners.
Once we receive your parts, we send them back out to you within 24 hours.
Start your service order here: www.myairbags.com/
Where you guys are located
1707 Enterprise Dr, Buford GA 30518
Myairbags.com
Hi if I remove the module will I still be able to drive the vehicle?
Yes vehicle will still run and drive, but of course airbags and SRS safety system will not work. Don't recommend that you drive it for safety reasons.
Thanks for the reply much appreciated
So with out the module you said the vehicle would still run but not safe. But, will the airbag light still be on on the dashboard or it would be gone? Thanks!
How much to fix a module on Honda Accord 2010 and how long do do take to fix it
Gerardo, Thank you for commenting!
Enter your make, model and year here: www.myairbags.com/
I have a 2015 Silverado and I’ve been told that the front seatbelts have to be replaced and cannot be rebuilt. Is this true?
John, the seat belts can be completely refurbished. The module can be reset as well. We have have been in business 2006, helping our customers save money on this exact issue. You can start the service order here: www.myairbags.com
Here is the seat belt repair link
www.myairbags.com/product-category/repair-return/seat-belt-repair/
one of my seat belts got cut. Will you replace the belt part of the mechanism? I am sending two belt units to you. Thanks.
Yes, we can rebuild your seat belt! We can change the cut seat belt and check the mechanics to make sure all parts are working. We have all the parts needed for the repair. Here is the link to get started www.myairbags.com/product/webbing-replacement-dog-cut-ripped/
How do I know if my seat belts are no good? Or is mandatory to get them fixed after a collision
Yahir,
After an accident, it is very probable that the seat belt has deployed. There's more than one way to know for sure. One very clear way is just to see if the seat belt is locked up. Sometimes belts are deployed but can still move. In those cases, you can still find out by scanning the car with a scan tool or you can also remove the belt and check resistance with a OHM meter as we show in this video here: th-cam.com/video/A2iqMqdbb5U/w-d-xo.html
I have airbag light on.. In Silverado 2015.. When scan it shows B0012 D01. Steering wheel air bag deployment loop high resistance
DTC history status : History
DTC current status : Current
MIL status : Requested
What does this means and how to fix it?
Looks like problem is with the driver airbag. Issue could be with:
1. Bad clockspring that is behind the driver airbag
2. Loose driver airbag connector
3. Bad driver airbag
If vehicle was in an accident/collision, then we can reset the airbag computer module and rebuild seat belt pretensioners at myairbags.com
@@MyAirbags how do I read the codes for a intermediate airbag light on, 2019 Silverado. I have a drb-II.
How much to fix airbag module an the two front seatbelts on 13 Altima sv
Airbag Module Reset for Nissan Altima 2013 is $69 and Seat Belt Pretensioner Repair is $75 each. www.myairbags.com/product-category/repair-return/airbag-module-reset/
Just zip tie the battery positive wire don't need a 5 min explanation of how it could swing back to make contact
Thanks
Great F**kn video wishh i saw this sooner👍👍👍👍👍👍👍👍
Awesome Guy, Thank you for the feedback
i just want to pet your pair
my chevy is a silverado l t single cab.
Are you Russian or Ukrainian by any chance lol
Nick, we do have Russian speaking employees. You are welcome to contact us via phone, email or through our webiste: www.myairbags.com/
Thank you for commenting! We really appreciate it!
04 gm has code B0051
Yes this is a very common deployment commanded error code. Usually with this code, airbags did not deploy but the code got set. The SDM airbag control module needs to be reset. Here is more info on how to get your airbag module reset:
www.myairbags.com/product/airbag-module-reset-3/
Seats from a 2014 Silverado and 2018 Silverado, are they the same? To just plug and play???
Seats or Seat Belts? Seats can be replaceable but look to see if there is a weight sensor on the seat. If there is make sure to remove the sensor from the old seat and install on the new seat. If you are asking about deployed seat belts you can start here: www.myairbags.com/product-category/repair-return/seat-belt-repair/
Reason for asking this is because I have a 2014 Silverado lt cloth interior and upgraded to a 2018 leather interior, everything works but the airbag light is on, on the dash, idk if the airbag wiring are different.
Hector Vega where you able to take the air bag light off? I upgraded my cloth seats to leather and my airbag light is on
Ivan cortez, I couldn't find a way to turn it off so wat i did I just swap the covers, took off the leather cover and put it on my old seats driver and passenger side. Thats how I fix it. I went the easy way I guess.