How To Sharpen a Rusted Dull Metal File !! Amazing Method !! Razor Sharp
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Hello everyone you are watching the video:-How To Sharpen a Rusted Dull Metal File !! Amazing Method !! Razor Sharp
I this video I will show you how to sharpen an old rusted metal file very easy!
I hope you enjoy watching this video!
#diy #inventions #sharpening
Good video.
First, I clean the file using a file brush, it has short stiff teeth just for that purpose. They come with a pick for removing material from between teeth. The more debris and loose rust you can remove before the process, the faster/more efficient the rust removal.
I use parts cleaner to remove any oils or grease, then I use the hot soapy water.
RINSE THOROUGHLY.
Then I do the acid bath.
ALWAYS ADD THE ACID TO THE WATER, NOT THE OTHER WAY AROUND. Adding water to acid can cause it to heat up, and possibly boil over.
After the first stint in the acid bath, I neutralize it, file out any loose rust, and clean it again.
Then I do a second acid bath, neutralize it.
The copper pipe and glue sticks are great ideas.
Keep posting stuff!
That's not why acid is added to water, it is because of a splash. when adding a liquid to a liquid , the source of the back splash is from the liquid that is already in the bucket.
I use a bench grinder with a brass wheel brush. About 2 to 3 minutes a side. They look and work like new .
Never heard of a file card obviously, they're for cleaning files!
Neither had my local hardware store when I went looking for one. I guess they don't sell them anymore.
@@ldhaney56that’s why Amazon is in business to get shit you can’t find any where local
Brass wire brush or brass wire wheel will work fine and do the job without any dangerous chemicals or glue sticks copper pipes etc
When I was an apprentice we would do all this in a matter of seconds with a simple wire brush. Files need pressure to work, at the end it was effective because he used that pressure.
Que hermosa melodia😊...
our sharing has helped me overcome challenges in life. Thank you so much!
That's cleaning, not sharpening. Better to keep a wire brush next to your bench to clean the filings out after use.
Another method is soak it in white vinegar for a couple of days then use the tooth brush to clean off .
Dear Sir, why didn't you get a iron or copper brush? It really would've saved you half the time. Anyways, thanks for the video. Your effort is appreciated. 👍🏼🙏🏽
Hi! Thank you so much for watching and for your kind words. I appreciate your suggestion about the iron or copper brush-I'll definitely consider it for next time. Your support means a lot to me. Stay tuned for more interesting content, and thanks again for your encouragement! 😊🙏🏽
Этот господин экономит не не время, а деньги.
A maneira mais difícil às vezes é a melhor ❤
@@InventorEye使用銅刷不用半分鐘就可以清除銼刀齒間的殘留廢渣。
Esa lima es muy fina o le tienen mucho valor sentimental. Con todo ese proceso. Prefiero conseguir una nueva. Un abrazo.
👍🏻
Concordo em gênero número e gral, muito trabalho pelo preço de uma lima nova.
@@adilsonbitencourt7 Informe o que é GRAL .
Optischer Aspekt: befriedigend. Praktischer Nutzen: fragwürdig, ist die Feile alt und stumpf, wird sie nach der Prozedur stumpf bleiben.
This is just cleaning the file really well, not sharpening.
Thank you! 😊Stay tuned for more interesting content!
The file is clean but remains blunt. That's why the file cutter's profession existed. He did it right.
You can clean a file but you cant sharpen one like this.
Thanks! 😊 Stay tuned for more great content!
Hog wash just cleaned out the teeth didn't sharpen a thing
If a file card was used once in awhile it might not get so loaded.
Creo que es más rápido con solo vinagre y sal ... De todas maneras gracias por compartir
great video, from Vietnam! Nice to meet you
Hello and thank you for watching from Vietnam! Thank you so much for watching and for your kind words. It’s wonderful to connect with you from across the globe. Your support truly means a lot to me. I’m excited to share more interesting content with you soon. Stay tuned for what’s coming next, and thanks again for being such a great part of the community! ❤❤
@@InventorEye There's nothing, I will always follow and support the channel, and wish the channel to grow every day and bring more useful videos to the audience.
I'm thinking of buying a new file !!
I have no chance doing this.... he didn't give the crucial angle on the copper pipe bend..... I'm buggered.... a new file for me..
I bought a new file today and bet it cost less than what he spent to clean that file. 😅
A lot faster
Great video on the recovery of the plugged, rusted file. Ever tried Evapo-Rust, its a non acidic, safe way to remove rust, it will not remove any of the iron from the file only the iron oxide even if you forget and leave it in for a long while. Its safe, has indefinite shelf life and will continue to work until all the cheating agent is used up, i have used a container for 2 years before it finally turns black and thickens up and no longer works. It wont hurt chrome, any non ferrous metals just have to brish off the debris when you pull it out. Its allso water based. Try it, it would save alot of work.
Thank you for the great tip! Evapo-Rust sounds like an excellent product for rust removal, and I appreciate you sharing your experience with it. I’ll definitely consider trying it out for future projects. Stay tuned for more interesting content coming up on the channel, and thanks for watching! 😊
Lo mejor comprar una nueva pero el le gusta trabajar de por demás 😂😂😂😂
É MAIS ECONÔMICO COMPRAR UMA NOVA.
Concordo, mas pode ser feito de forma mais economica e mais rapida. Pode-se fazer uma massa com amido e farinha misturado com agua e vinagre. Esta massa ira tirar a ferrugem solta. Na outra etapa que usa cola quente para retirar o cobre que ficou grudado, pode-se deixar no PERCLORETO DE FERRO. Que vai eliminar o cobre e protejer contra a ferrugem.
I agree, but it can be done more economically and faster. You can make a dough with starch and flour mixed with water and vinegar. This putty will remove loose rust. In the other step that uses hot glue to remove the copper that was stuck, you can leave it in the IRON PERCHLORIDE. Which will eliminate copper and protect against rust.
@@josemariasilveirazacarias7154 rinse and repeat
O espirito da coisa é ensinar outras formas de resolver, temos que entender isso
А зачем покупать новый !? Если работаешь на заводе то достаточно пойти в инструментальную кладовую , взять новый хороший напильник и забрать домой . Вот и всё !!!
Or you could just buy another file?
El video es : como limpiar y desoxidar una lima. No hay forma de afilar.
Si hay una forma pero como es todo tonto no le dije y si la limpio y mal ademas
0:48 Las limas no se afilan,se pueden limpiar nada más.
把銼刀整理返鋒利用任何液體是外行人的想法,在行的祇需一個銅刷順着齒紋刷一下就完成清除齒間的殘留物。
Files can also be sharpened - of course not like in the video. The blunt files are annealed, re-cut and hardened again. There was (is) a trade for this - the file cutter.
Ice De-Rust & Deep Clean. No actual dharpening, just refreshing to nearly new condition
Apenas fez uma limpeza (utilizando muito material, daria para comprar outra nova ).
As estrias permanecem com o brilho de desgaste !
waste of time
good video you did very well
Thank you!
Never heard of a file card ?
Very good, really good!!!
I often make small special shaped files by suspending shaped and hardened steel in muratic acid for a few days. The acid actually etches lines and points that are oriented toward the bottom of the container. A cleaned file suspended for overnight will definitely definitely come out sharpened some.
Já trabalhei em indústria d fabricação d lima após o uso e o desgaste não e possível reafiar uma lima...
File card? They used to make a tool just for that. Like a wool card but for cleaning your file
I use 6% vinegar & leave it for a day or two. Then rinse it off with water thoroughly & spray wd 40 on it to get rid of the water.
Too Much Work 🤔, Although The Quality, Materials, And The Know How, Of How To Make A Good Quality File, Today Might Be Lost,
And Restoring Old Stuff Is Still Pretty Cool 👍
🍒 bonjour
En France, nous avons un outil qui permet de " nettoyer " une lime celui ci s'appelle : Carde
Thanks! 😊 Stay tuned for more great content!
I submerge them in white vinegar for two days and then remove all remaining rust with a wire brush. Brushing takes no longer than 19 minutes.
I meant 10 minutes...
Muchas cosas ,mucho proceso, les voy a dar un método más fácil, no tiene que lijar ni cepillar, en un frasco hechas jugo de limón, cubres la herramienta, la dejas reposar por una hora, el óxido, la mugre acumulada sale sola , y sale como nueva la herramienta, algunas veces se queda un poco de oxcido, hechas nuevo jugo de limón esperas media hora y listo , hay que tirar el jugo de limón viejo, las líneas de la lima quedan totalmente limpias ,solo sale el óxido. Saludos.
91% Isopropyl alcohol and a wire brush. I’ve restored close to 100 files. I’ve used Evaporust, vinegar, nothing but elbow grease, etc but nothing beats good old 91% isopropyl and a (mild steel) wire brush. Also, file cards are not for file restoration, but file maintenance
wait that wasn't sharpening it it was just cleaning it.. I do the same with a wire brush.. rats I thought I might learn something here.. not this time.
Bravo...😊😊😊
I'm so glad! 😊❤😊
There are many videos on TH-cam detailing how to sharpen files using vinegar acetic acid. First chore is to clean file with stuff steel brush and sharp point to remove clogged residue to expose metal before submersion in acid. The longer submerged the sharper the result. Rinsing with water and final short soak in soda ash to neutralize acid followed by another water rinse and immediate hot air drying to limit rust of new exposed metal. I like to add additional acid to vinegar soak. No need to add any water. All other videos follow this general schedule.
Si quieres que más personas vean este método y lo usen deberías poner en video que estás usando no todo el mundo sabe que es HCL😝😝
No sabia que estaba usando acido cloridrico, toma tu like.
Tốt nhất sau mỗi lần sử dụng dùng bàn chải sắt hoặc đồng chải . Ở Việt nam trong thời kỳ chiến tranh ,dũa bị tà (các khía mòn ) người ta băm lại để phục hồi . Ngày nay dua x mòn quá ,người ta dùng rèn dao . Riêng tôi ngâm các đồ rỉ trong nước vo gạo đặc ,trữ nước vo gạo cả một tuần lễ ,nhờ vậy sau khi ngâm một chi tiết của tàu điện thời Pháp rỉ tới mức không khác gì cục sắt rỉ đáng vứt đi ,tôi được một chiếc đe hoàn hảo .
इतना मेहनत करने की ज़रूरत है, इससे अच्छा एक नया फाइल खरीद लीजिए
Toca adivinar losproductos usdos.
Soaking it in WD40 and let it dry for a day, then use a Copper Wire Brush along its crevices is the best way.
Use a wire brush it's way faster .......
Makasih ilmunya
Terima kasih banyak atas komentarnya! Senang sekali jika ilmunya bermanfaat. Kami sangat menghargai perhatian Anda pada video ini. Jangan lupa untuk tetap mengikuti kami, karena masih banyak konten menarik yang akan datang! 😊❤❤❤
e so deixar no acido muriatico por 1 hora e pronto fica bem melhor que isso ai
It's a lathe file. One direction cute only.
Vou testar aqui pois nem sempre posso me deslocar ate a cidade porque moro em area rural
They did nothing to sharpen the file edges. All they did was clean off the crud on the teeth and down in the grooves.Any number of methods can do that.
Or you could put it in a tumbler with kiln dried sand and some small aggregate, it will cut fine once you've blown it off
A wire brush on a drill wouldve saved you a lot of time.
Con todo respeto, cuanto vale tu tiempo y esfuerzo. Acaso no es mas barato ir a comprar una nueva,
Gracias
The full form of HCL is Hindustan Computers Limited
A file card does the same job
Your not sharpening the file. Just cleaning out the rust and gunk between the file teeth.
Wire brushes are faster and cheaper.
Für den Aufwand kaufe ich mir besser eine neue Feile
May buy new file....
Brosse métallique sur un touret c'est plus rapide et efficace 😅
There’s 9:47 I’ll never get back. 🙄🙄
Wow 12hrs later it seems sharper,try soaking in muriatic acid overnight then coat with sodium silicate right after rinse or it will rust right back
Y para que son las barritas de silicona...?
Try a file card faster safer.
Leave it to amateurs to make a job much harder!
Wow! Nur ein halber Tag Arbeit um eine Feile die man für ein paar Euro neu bekommt wieder optisch hübsch zu machen... abgesehen davon muss man erst mal das ganze Zeug was benutzt wird zuhause haben bzw. besorgen und mal überlegen was das für einen Wert hat und ob eine neue Feile nicht letztlich doch die günstigere Variante wäre.
Hell with all that, just use a file card
Was für ein Schwachsinn wird hier denn gezeigt🙈🙈🙈!
Let's see ... wash off the oxidation ... deburr the blades with by cutting into a softer metal ... strop the blades with silica dioxide ... Si02SiO2Si
Ôi mua 1 cây mới còn rẻ hơn mua mấy loại hoá chất trên
My grandad used this method in the 50s and i have used this repeatedly to clean . Not sharpen. Once the teeth are dull the file is no longer capable and either scrapped or made into another tool.... Vinegar works well and is not as corrosive as hydrochloric acid !
Sinceramente, melhor comprar uma lima nova e ter cuidado para não emferrujar
Even at 2x, forget it
Mua 1 cái mới còn rẻ và khỏe hơn làm việc này, chưa kể acid văng vào mắt là khổ.
No hay nada mejor que dejarla sumergida en jugo de caña
Gastou ácido clorídrico, soda cáustica, anti gripante, madeira e as borrachas mais a mão de obra. Não vale a pena. Melhor comprar uma lima nova.
Металической щеткой хорошо чистится
Files are not hard to find and they're not expensive wouldn't it be a lot cheaper and easier just to go and buy a new one
Quality hand files are not easy to find and when you do they're usually not cheap then either.
It works better because the debris between the grooves is gone. I didn't see any "claimed" sharpening process here. Just a disappointment !
❤❤
Sitting in the acid not only removes the rust, it also etches the teeth. Removing metal from them actually does make them sharper. It's not a great process to use on a file that's still sharp since it does remove metal, but if the choice is between acid etch and chuck it in the scrap bin, you might as well. What's nice about the process he shows is that you can do multiple files at a time. All that nonsense with the tooth brush takes a lot of time though. Hit it with a wire wheel real quick, lay on some WD-40, then back in the tool box until you need it.
Espremíamos limão dento de um gomo de bambu e deixávamos por uns dois dias a lima lá dentro, saia limpinha tbm
Ever heard of a card file !
Use the toothbrush to clean your teeth before doing this, not after.
Achetez une lime neuve au lieu de perdre votre temps avec ça.
Tem que ser em português, do contrário não coloque, poucos conhecem a língua inglesa.
The method of using acid to remove rust from a metal file is impressive and effective. This video not only saves money but also promotes recycling and environmental protection. An illustration of the ability to recycle and renew used tools
Thank you so much for your thoughtful comment! I’m glad you found the method of using acid to remove rust impressive and effective. It’s great to hear that you appreciate the focus on saving money, recycling, and environmental protection. Your support truly means a lot to me. Stay tuned for more interesting content-I’m excited to share more with you soon. Thanks again for being a part of the community! ❤💖
Coloque a lima enferrujada de molho no caldo de limão por dois dias, lave e repita o processo. Ficará perfeito com menos recursos e trabalho.
Ovo je čista glupost.
Primero me disculpo por lo que opinare, primero eso es limpiar la lima, no es afilarla, segundo habria sido mucho mas sencillo y eficiente usar un cepillo de metal para remover el oxido y el sucio de la lima, quiza usando lubricante ya que este afloja el oxido, pero usar un cepillo de dientes fue solo malgastar tiempo y esfuerzo.
This is ridiculous. Cleaning is NOT sharpening. If the cutting edges of teeth have been dulled by wear from long use, cleaning the file does nothing to “sharpen” it. Your title is a lie, sir.
10% water and 1% HCl acid. WTF is the other 89%? Or did you mean 10 parts water to 1 part acid?
Lento y patético, limpiando una lima con un cepillo de dientes. Me hace acordar a mi tía Clotilde. . .
Realmente prefiero comprar una nueva, o dejar la vieja en vinagre blanco olvidada unos dias y terminar de limpiar con cepillo de alambre para darle un ultimo uso porque aunque la limpie y destape bien ya es una lima vieja usada y gastada. En conclusión compro una nueva y no pierdo tiempo uso inmediatamente.
😂😂😂 esto no es un afilado, es una limpieza...
舊的做刀更好,母謂浪費時間。
А как заточить не металлическую напильник? 😂
Eu coloco de molho no suco de limão ou ácido clorídrico depois de limpa borrifo com wd 40.
Olá! Agradecemos por assistir ao vídeo! 😊 Fique de olho no canal para mais conteúdos interessantes que estamos preparando. Muito obrigado pelo apoio e até a próxima! ❤️🌟
Video about cleaning in a silly way. No sharpening.
EU tenho outro método suco de limão colocar em um cano pvc após três Dias fica novíssima ❤😂🎉
Why do all this when you can buy 3 for $10.00 @ ACE hardware? Or use a wire wheel ifN yer a tight wad. LOL
Ten minute wasted watching that video. You claimed a way to “sharpen” a dull file but you showed just a complicated and hazardous (due to the use of HCl) way to simply clean a file. You’d better get the same result with a brass or steel brush in a fraction of time.