Kolb Firefly FAR 103 Legal Ultralight Build video part 2/3
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Sorry all for the LOOOOOOOOOOOONG delay in uploading. I had made a part 2 video on the actual fabricing of the tail sections however somehow the clips got deleted. In this update, with the help from my dad, the tail section is now all mounted and just minor finishing touches are needed. the next step will be covering the Ailerons and then the wings. I will make my next video on those steps and other stuff that has been completed and worked on
looking good !!! you are going to love this machine when you are done !! mine flys like a dream !!! you might want a kolb break away tail wheel for that .. helps with ground handling alot !!
Looks good -- you learned from your mistake and as long as the fabric stays on, all is good.
You might want to try keeping that fabric sling seat, my experience with fabric seats on recumbent bikes is that they cant be beat for comfort.
Cheers
The bracing wire bracket on the stbd stabiliser is terrible... The hole spacing not confirming to the plans or aviation practise. Will probably be fine but you will only find out it wasn't in your way down...
I would have gone with Ortex covering since not much needed the cost would not have been that much more.
Good
Hey, do you have any actual putting the fabric on video, any part, i.e. wing, aileron, or stabilizer etc to share? I want to know how difficult/easy was the actual process of fabric'ing for you? especially if this was your very first time (0 prior experience)!
I have some old video I made before I decided to make this channel. I can try and find them and put them in one video. I think some of it is timelapse. but still should show the process
What type of fabric is used for the plane's lid and what kind of resin is used?
it is UL 600 fabric and a glue by Oratex betteraircraftfabric.com/oratex.html