Ford S-MAX How to replace Parking/Fog light bulb
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- How to replace Parking/Fog light bulb on Ford S-Max.
Another option is to remove the headlight and you can
replace bulb without pulling fog lights, it is maybe easier than this video tutorial.
Here is a link to the easier way:
• Ford S-MAX - the faste...
How to replace headlight bulb is here: • How to replace/change ...
There is a simpler way of doing this which avoids damage to facia/bumper. Remove the headlight cluster (two torx bolts) and go in the back
Yes, that is true, I made another tutorial, here is a link: th-cam.com/video/_96ONFNZRUk/w-d-xo.html
My dumbo mechanic thought he had to go under the car.. But its easy as 1 2 and 3....
Helpful video
Thnks
Your welcome, the fastest way is removed headlight - only 2 screws, and you have nice access to foglight :-)
I need to replace the whole fog light (it's cracked) so thanks for this tutorial!
Your welcome, the fastest way is, remove main lights (just two screws, and one connector) a you will have good access to the fog light. Good luck.
@@VladDublin it worked. I did it yesterday. Thanks again.
I had to remove the front and I realize that it was super easy to push down the small metal clip from above when the hood is open.
@ your welcome, I'm glad it helped. Take care, Vlad
I couldnt pull out fog light so i removed headlight - only 2 screws from top, its even easier and also you wont scratch bumper while removing frame around fog light and light itself
Yep, I wrote some info below the video, it is easier to take off the headlight and remove the bulb from fog light, it is quite difficult move the stop metal sheet inside, anyway you can do it if you remove the headlight, the acces is wery good there :-) thanks pal.
After 30 Minutes trying to PULL the damn thing out I did it the same way as sysell. Takes only a few minutes and can even be done with cold fingers :D
Super!..thank you..!..😊
Very THANKS . Perfect ....
It helped a lot
thanks for this!
Your welcome.
O ja pierniczę. Rameczka chrom dla "urody", a śrubokrętem po lakierze drapie. I to widać wkoło lampy. Można kupić za psi grosz łopatki specjalne z tworzywa do tapicerek(sam takimi przeciwmgłowe wyciągam bez problemu) albo zrobić. Ale nie -sposobem na rolnika i jeszcze się chwalić w sieci.... Spoko sposób. Z korkociągiem chyba byłby jeszcze bardziej niszowy.
Nice video, what bulbs did you use as I'd like to upgrade my old yellowish ones to some brighter sharper looking ones if you don't mind me asking?
There is light bulb(parking lights) with socket W2.1x9.5d, 5 W, 12 V, I used LED,you can use maybe this one:
OSRAM W5W LED 2880CW02B Cool white 6000K 12V
or Fog light is PGJ19-1, light bulb H8. Good luck pal.
@@VladDublin Cheers mate, much appreciated
@@mattski8787 Your welcome, buddy.
Which type of bulb will be required here? Thanks!
Socket H8 for Fog light, T10 for parking light bulb.
hi would can i get the builbs from?
Рукожоп весь бампер во круг фары по коцал.