How to Replace Fuel Pressure Sensor 1995-2001 Ford Explorer

Shop for New Auto Parts at 1AAuto.com trq.video/c-199-u
This video shows you how to install a new fuel tank pressure sensor in your 1995-2001 Ford Explorer. The fuel tank pressure sensor feeds data about pressure inside the fuel tank to the EVAP system to determine if there are evaporative leaks in the system. A bad sensor will most likely trigger a check engine light for the EVAP system.
This repair was done on a 1997 Ford Explorer Limited 5.0L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver trq.video/obap...
• 19mm Socket
• Fuel Line Disconnect Tool trq.video/oR-1...
• Pliers
• 1/2 Inch Impact Gun trq.video/opC-...
• Ratchet trq.video/obpQ...
• Socket Driver
• Socket Extensions trq.video/obeh...
• Torque Wrench trq.video/oatJ...
• Gloves trq.video/oKf-...
• Paper Towels trq.video/oy4-...
• Rust Penetrant
• Safety Glasses
• Floor Jack trq.video/oVk-...
• Jack Stands trq.video/oN2-...
• Pick trq.video/oIC-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Explorer 1995-2001 2nd Gen: • Ford Explorer 1995-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.