Seekins 6.5 PRC New Barrel, New Load Development

[@rustynut1967]

I don't know if your stock will allow it but if you can flip your rear bag rider around so it's flat on the bottom. I could do it on my XLR chassis. You measured JAM not TOUCHING. so you seated .020" off of jam, not off of the lands. Your method is fine but you don't know if your jumping the bullet or slightly into the lands and it can be confusing relaying load information when conflating the two terms.
Good luck with your load development, it looks like it should be a shooter.👍

[@mattsreloadingbench]

Thank you for your observation. I will definitely be more diligent about that.
Thanks for watching!

[@mattsreloadingbench]

And I plan on replacing the rear bag rider. I'm not happy with the one that is on there.

[@bmghunter5966]

Oh nice I'm planning the same components load. Will see how yours go.

[@mattsreloadingbench]

I had to change gears. You will see why in the next video.

[@keithalbrecht4785]

That's your new baby, looks pretty sweet! Hope your testing go very good!! I'm planning on hitting the range middle of next week, to finish my testing.

[@mattsreloadingbench]

I hope your testing goes well also.
Thanks for watching!

[@charlesharvel4339]

I put an EC tuner on my 6.5 creedmoor Ruger American. I got my groups from about 3/4 to 1/4 moa.

[@mattsreloadingbench]

Very nice!. I too have one on my 6.5 prc. But I am not at that point for load development yet.
Thanks for watching!

[@texpatriot8462]

Where are you finding Reloader 26?

[@mattsreloadingbench]

Well, I was able to get my hands on it one time and I have not seen it since. I picked it up at a small place local to me.

[@stevechamberlain2158]

Are you feeding one at a time or any issues with feeding through the magazine with .20 off the lands?

[@mattsreloadingbench]

One at a time.