(400) Arrow 12 X 20 Carport -August 4 -2021
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Just my review on this Carport. Its really needs 2 guys to assemble this carport, but I managed to do it all by myself. I wouldn't do it by myself if I had to do it again. Feel free to ask questions.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (2/4)](http://i.ytimg.com/vi/GgeGQOP10RQ/mqdefault.jpg)
Nice. I like your idea for marking the center of the braces to which the roof panels affix. I start my assembly today on gravel as well and will definitely use that idea to maintain squareness. Good idea and great video. Thanks
That drill is awesome! I love tools and I really like the old tools that built what has made this country. If you ever decide to adopt that beautiful drill please keep me in mind. I would love to have the pleasure of keeping it in the workplace and showing younger guys how simple and strong older tools are. Built to last, Not to fail!
If I ever decide to part with that screw gun as they used to call them, I’ll let you know. They don’t make them like that anymore. I even have a spare clutch but never had to use it. Thanks for watching.
@@JackOfAllTrades2022 at the very least make sure that it has a good home. And thank you for responding.
@@JackOfAllTrades2022. Make sure to Maintain the Ground on that drill.
Good job
Thank you for the video ! It is really helpful
L
Caulk it so the water doesn't get into it, if it's not welded all the way around the water can get out. The instructions are for many size covers. On my install the short pieces were 8 inches long
Don’t complain! They say if the mountain don’t come to you…you go to the Mountain or there’s many ways to milk a cow. Like the idea to JUST CAULK the separations of the metal and end of story or just paint it/weld what’s needed…end of story!
I just bought my wife a new car so I’m about to buy an 18’ x 20’ or 20’ x 20’ metal carport. I think I’m gonna go 7’ tall. I want to get a 4 wheel drive truck eventually. I think 6’ might be too short to fit under. Thanks for the video. They don’t look too hard to put together.
It’s plenty high, I have a 4X4 it’s fits fine under the carport. Bought it for my boat and I can stand up in the boat in the carport. So far so good.
The biggest problem I see with this because I live in New England is how the roof is. The way it's designed the snow won't slide off the roof and snow is heavy I would want those panels turned 90% and have to install gutters on each side. Even then I question if it's strong enough without some cross bracing to last a winter without collapsing.
Last winter we had some heavy snow, maybe up to 6 inches on the roof… held up pretty well. But in your case you could reinforce it somewhat. I forgot what the snow load is but I’m sure you could find out and look up the specs. Otherwise it’s been holding up pretty well. My only complaint is the condensation underneath and would drip on a car.
How do you plan on putting the gutters on? I'm asking because I have to do the same.
Good Job!
Did it not come with any foam seal tape with this kit to prevent water leaks on your roof panels? Or did I not see that part.
Yes it did come with the foam tape, I just didn’t show it I guess.
Thanks for the video. Did you get the 7’ or 9’ tall? I’m trying to do the same thing for my boat. Are you happy with it and does the boat fit okay under it?
@igorz3600 I can stand up in the boat under the cover with no problem. And I'm 5ft 11. I'm not sure how tall it is in the center but definitely tall enough. I would have to measure. So far it's been holding up as it should, no leaks except depending on the weather it has condensation and drips, so you may want to cover your boat if you don't want it to drip on your boat.
Oldest drill I’ve seen, cool
Used to call them screw guns. I worked for teardrop campers back in 1969. They got a lot of use, made to last.
@@JackOfAllTrades2022 In your will, make sure you donate it to the Smithsonian. You might get a tax break too🙂
Looks good. Don't know how it is anchored. Are the anchors and instructions included? I would use small concrete footings and anchor bolts. I will do the two car 20 x 24. At least yours is covered on two sides.
I made one that is 18x20 into a shed/carport
It should of been all galvanized steel and not painted
You can order it painted.
Enjoyed what video?
Thank You
I would use rebar for anchoring. That anchoring that comes with it dont look very strong.
We’ve had some strong wings here lately and it hasn’t moved.
The left side is up against your neighbors side of the fence. When it rains (downpours ) wouldn't the rain run off your carport roof and flood on to his property.
No, first it rarely rains here but even when it does, it’s all gravel rock on both sides and drains fast, no problem there and I’ve got great neighbors. Not a problem.
The ones have is 5feet on center
Great video. I just have a question, how did you get the drill between the house or vinyl fence and the braces to get those lower panels since it looks very close? Maybe with a 90 deg attachment?
Ok Thanks.
It wasn’t easy! My neighbor let me come to his side of the fence and I didn’t have to drill at an angle on either side.
Thanks, yeah I bet it wasn't much fun when it came to those.
Does it seem sturdy enough? How much did it cost roughly? Nice video.
Yes, we’ve had real strong winds and it didn’t move. $1200 at Lowes
@@JackOfAllTrades2022 I purchased one of this today, June 9, 2022. Lowes has jacked up the price for this carport, to $ 1,799.00 + $79.00 for local delivery. In Riverdide County, Southern California.
@@myutube1960 That’s crazy… like everything else, it’s all going up. I picked mine up myself with my truck, but the price of the carport as gone way up.
$1200 plus tax but heard it’s gone way up.
I have to do a carport , so how did you do the roof up next to the house , space is small, how did you drill in the screws, you had about 6" or less.
It wasn’t easy, but managed to get a smaller drill in there and there’s a window I was able to work through for some of the holes. If there’s a will, there’s a way.
Thanks for the video. Now with a year and a half how is it holding up?
So far so good, and we’ve had lots of winds. Even the snow didn’t affect it. Held up well.
@@JackOfAllTrades2022 Nice, any rust? Thanks for responding so quick.
@@KevininMTL No rust like I’ve heard some people complain about.
I just looked at it carefully yesterday after all the snow we’ve had and I did notice one small leak between the roof panels. But it’s an easy fix. I’ve got it anchored down at all four corners and it didn’t move from what I could tell.
@@JackOfAllTrades2022 Appreciate your time and responses. Thanks!
What was the height of your carport. 7’ or 9’. As of now, how is the carport holding up?
It’s holding up great, we had a larger then normal snow load and lots of winds. Still looks like the day I installed it. It’s 9 in the center and 7 on the sides.
Do you need a city permit? Also how much weight can you put on top? Want to put solar panels to charge my car?
I suppose it depends on the city you live in! I didn’t need one. You would need to contact the manufacturer to find out how much weight you put on the carport.
How it holding up? Any rust yet?
Cheers
Not yet..holding up good and we’ve had lots of rain and snow and wind.
You got a link to the exact anchors you used?
Great job. Thank you for the video. I just bought the 12 x 20 and was wondering what the distance is from the ground to the siding on the side?
I’ll have to get back to you on that, I’m away from home…
It’s about 6 ft. 2 inches from the ground…I’m 5’ 11 and it’s a couple inches above my head. Hope that helps.
Im getting ready to go help a friend put one of these up the exactly the same one we are both in are 70s I hope we can do it twice as fast thanks for the vidio
@@markeiler9753 If there’s 2 of you, there shouldn’t be a problem. Have fun!
@@markeiler9753 And how did it go?
3words… “can of paint”
do the holes in the bottom frame go through both sides or just the top? could it be attached to concrete piers?
Just the to top, like you see in the video.. they holes are predrilled. And as far as the concrete piers, if your talking about the ones you buy at Home Depot or Lowe’s, not sure about how much wind you get, they may not be heavy enough in a strong wind. Maybe if you poured your own , at least at each corner.
Hope that helps.
Hey man, how white is the "eggshell" colour? It's hard to tell from the video.
Eggshell color.
@@JackOfAllTrades2022 lol. so like, more of a cream, than a white?
@@xYoungDeezYx yes
@@JackOfAllTrades2022 thank you good sir
I wonder why they complain of roof leaks?
what kind of rocks are those and where did you buy them?
Not sure, they where already there when I moved here a few years ago. I’m in Nevada. Take a screenshot of the rocks and take it to your local rock stores.
Been seriously thinking of doing the same right next to my 42’x60’ Morton Pole Barn. I plan to go with either 2- 20 footer’s or 2- 24 footers. Haven’t decided as of yet or what brand to go with. My question to you or anyone else that have installed one of these. Will the steel roof handle a snow load. I am not just talking about any snow that may land on it while snowing but also snow that may slide off the Pole Barn Steel Roof onto it being it will be sitting next too because those vinyl tarp type 10 x 20’ Canopy’s that most places sell for sure will collapse. Don’t ask me why. The other thing is I am 71 years old looking to do this job. Curious what it would cost me to have it installed? I am in New Jersey. I have no idea who to even call to get a estimate to see what that cost would be. Not afraid to tackle it myself but just curious what labor might be for someone else to do it.
I’m 70 and did it by myself, we get snow here but only 2 to 4 inches. Handled it very well. I bought that one at Lowes, you might want to ask them if they install and check out the specs for the snow load. I’m sure you get lot more snow. It wasn’t hard to install. Two people would be real easy.
@@JackOfAllTrades2022 I called Lowes today and was told they don’t have installers to install them. I have had some health problems the reason I am looking for a installer at this point in time. The frame I don’t see a problem with but to get up on a ladder for the roofing material could possibly be a problem for me.
@@ffas23 I understand, I had back surgery since I installed the Carport, not because I installed the carport, I’ve had back problems for many years before that. What I’m getting at, is that even with my back hurting, I was still able to do it. But I understand that at our age we shouldn’t even be on ladders. You might try looking for a handyman in your area. Marketplace on Facebook or Craigslist. A son or son in law? Grandkids? Younger brother? And you just guide them on how you want it done. Every time I hire someone, I’m right there making sure it’s done right ( my way). Or Angie’s List in your area. Wish I could help you more. Good luck, hope you find someone. Get recommendations from neighbors? Not easy, I know. I’m all alone myself, except for my wife and she’s older then me. She did help me carry the frame from the garage to the side of the house. I just took my time with each panel. All I have is time.. good luck.
How do you feel a week later???????
Just fine, if you take your time, don’t try to do it all in one day ( and I used to be that way ) not anymore, I’m retired and take all the time I need. But it’s better if you have 2 people. My wife did help me bring the verticals from the garage to the side of the house, and she’s 75.
is how mach cost in total is bery good
$1,674 from Walmart for the exact same one.
MR. JAIME, CAN YOU BE MORE SPECIFIC? WHAT TYPE OF BERRIES ARE YOU WANTING TO BUY? PLEASE KNOW THAT DIFFERENT TYPES HAVE DIFFERENT PRICES. CHEERS!
My space is only 9x20 size. Do you think it fits?
Not if your space is only 9 feet wide.
is this mike the painter!
Is the screws come with the purchase?
👍 Yep
How long do you think it will take two guys to build
Probably one day, 2 days at the most… the frame went up in no time at all. The panels with 2 guys should go up pretty fast and easy. I have back issues and 70 years old, and I took my time, but 2 guys should be able to do it quickly.
@@JackOfAllTrades2022 Thanks I'm trying to do an estimate for one with walls and garage door 12x31
@@mikeramirez6179 Nice..good luck, Not that hard to do.
Would you buy it for 50% off?
All the measurements. Made in China metric to inches maybe?
What are you saying or asking?
@@JackOfAllTrades2022 maybe the measurements where not converted correctly
@@JackOfAllTrades2022
And did it create a larger issue?
@@robertbragg2380 no, it all fit together well at the end. It’s in inches.
@@JackOfAllTrades2022 thanks
I’m looking at this and gonna reinforce the walls with walls of pallets.
How much it cost
$1200 at Lowes
How much ? Link
I was over a year ago at Lowe’s, it was $1200, I’m sure it’s more now.
Explanation….made in China.
And your point?
You got a link to the exact anchors you used?
They come with the carport, part of the kit