It must have been a nightmare to film with all that reflective tape, you did it like a champ! Very clever build and use of components👌 Thanks for sharing!🙏
It definitely works for that too. First I was thinking I would use one of those ready machines for this but decided to do this. Great to hear you came up with new use for it. That's ingenuity
I was about ask how you keep the LEDs from shorting out in the water, but then saw you put a separate container inside the bigger one and was like...That makes more sense. :P
The moisture build up on them would surely cause a short, not something I would leave unattended really, or touch accidentally by lifting out anything. Imo you can just buy waterproof led strips that would be better :)
i made mine with tinfoil and clear packing tape...i didn't cut the light and have it looped all over...lit on the bottom instead of the lid...took me 5 minutes and it works like a charm
I made my own off the back of this, awesome guide by the way. I used a single 360W power supply to power both the LEDs and the heater all at once, a much more elegant solution in my opinion, even if it does involve a big ugly steel box with a fan bolted to the side of the storage crate. I also wired up the aquarium pump that I saw down here in the comments, it circulates the hydrogen peroxide nicely and gets a more even temperature.
hey dude, I’m doing this build myself and the part you have linked as the controller board is actually just the case for it, which I realized after it arriving. The actual part ships faster than the case itself funnily enough so I’m cool on that part, but I wanted to let you know so you could fix it for anyone else who tries this build.
Ok this is the best invention I have seen. I used your first retro bright technique and worked wonders. Now I am wanting to try this process however I am not good at wiring etc. however this looks like it makes it a lot quicker for you. Very creative technique and I say patent this technique. Also I bet you can make a lot of money if you decide to create this and sell it. I would be first to buy it to be honest with you.
My first retrobrite "box" was a literal cardboard box with foil taped inside and a led strip bent around it, it did work but had to replace the foil once (I only retrobrited about 8 things) as the led strip wasn't exactly flat against the sides it came unstuck and stuck to the plastic items so when lifted tearing it. so far the only things that have reyellowed using that is a Nes and Snes controller which is probably not a coincidence. I then got a led floodlight and retrobrited a white saturn from nicotine white to looking brand new and rather than leaving it in at least a day it only took about 8 hours! I have now made a new box out of a large plastic container and due to it being easier to tape the foil and using a floodlight I expect great results.
I just came to comment on a sunbrighting video, and TH-cam's algorithm suggested this video. It isn't mentioned in the video, but I'm guessing it takes about a day or so for the retrobrighting process to finish? I just left an very yellowed computer's front plastic outside in direct sun light for 3 hot days, and it's almost back to it's default beige color, so I'll leave it for 3 more days to see how far it goes. For those who don't mind a longer waiting time and/or prefer a cheaper (free?) method, it's definitely an alternative. I don't promise it will remove 100% of the yellowing, but it does work and doesn't expose the plastic to chemicals.
Build a box myself with just led strips and aluminiumfoil but this is gonna be a nice upgrade for my summer holiday 😂 building a uv box when there is enough outside 😂
This is an awesome invention, I am literally waiting for all the parts now to do this myself... I do have one question relating top the condensation.. did it ever cause an issue with shorting the LED's?
Hey heads up the link you have for the W1209 temperature control board is a listing for just the acrylic box. I was waiting a few weeks for mine to arrive and when it finally did I realized what I had paid for was just the case. x.x I found another listing with a set of two boards, so hopefully I'll recieve them soon so I can start building my own retrobright box!
I literally just made one of these myself earlier today, except that I put the LED tape on the outside facing in through the clear plastic container, then put foil around the outside of that so that I could use the container itself as the liquid holder. The biggest difference between what you made and I'm doing is I read that using a small amount of oxidizing catalyst (like that found in OxiClean) helps boost the process and can replace the need for additional heat. In addition, I have access to 15% Hydrogen Peroxide so I'm using that instead; it seems to go much faster, though only time will tell if this is as safe for the material.
@@Odd_Experiments That certainly makes sense. If I wasn't doing such large computer case pieces and didn't have access to several gallons of H2O2, then I'd probably be in the same boat. I love seeing different ways of tackling the same problem. Thanks for the video!
I am in the middle of making one of these myself - so far so good! I am opting to buy a thermostat controller and plug-in heating element instead of doing all the wiring and programming required for the temp controller, but I'm really hopeful about getting my old consoles looking nice. One note: Hydrogen Peroxide is EXPENSIVE! I was planning to retrobright an old Mac Classic, but I'd have to spend at least $150 on enough H2O2 for its shell, so maybe not...
Love the content! Question about Retrobrightening: does it work on consoles that are colored or only those that are white/transparent? I have a "purple" Gamecube that looks quite sad, could the Retrobrightening help restore the original color you think?
If I remember correctly he's done a retrobrighting of a colored semi-translucent N64. The best visual results come from white/gray/transparent plastics but it can still work well on plastics regardless of color.
So I bought everything on your list, but when I hooked up the heater it burnt up the U2 chip. Did you have any circuit from the heater to the thermostat l?
I'm getting some issues here too. When the relay is closed all is fine, but when the relay is opened (connecting k0 and k1) it keeps restarting. It's like a something is shorting. Any help on this?
Wouldn't it also be possible to use a rescue blanket instead of tape? It isolates and reflects really well and i would actually say that it would be more effective.
Random question but can you reuse the hydrogen peroxide for multiple applications? I assume multiple batches on the same day but can the hydrogen peroxide be used days/weeks apart?
No. Hydrogen peroxide(h2o2) turns to water(h2o) after its extra oxgen atom oxidizes whatever you add to the solution. Hydrogen peroxide is just water with a extra oxygen atom and that's precisely why it's able to disinfect.
The clear tape you use for the leds, you mentioned that you might want to use extra adhesive to keep them down. Would double sided clear tape be a good solution? that way no additional adhesive needed? The clear tape works for both keeping it from touching the aluminum and allow for extra adhesive for the light strips?
I'm currently building one similar and have seen this updated version of his previous one and just wanted to say - looking at the comments this build really isn't a beginners project, don't simply follow the video and build one yourself and have no risks. So I wanted to add - First you MUST connect this to an RCD adapter, when running anything around water it is vital that the power will cut off with a short, don't rely on your house breakers to cut it off for you, especially in the USA where usually there is no RCD for separate sockets etc. Water + Electricity = Use an RCD. Second - you can't leave this unattended, so for example say you have made this in your flat or house and have this running in a back room or whatever, overnight.. - don't, make sure you check your power supply and everything is all ok during its first few runs! And not to leave it on carpet. It must be placed on either a concrete floor or tile/slate that can help take the heat off that ground spot, especially the power supply if it is a power brick (recommended). There are TOO MANY cheap power supplies out there online that you can't rely on that may say they are suitable, but when it comes to heating elements running for hours at a time it is not worth having that risk in your home or soldered joints becoming loose etc Some modifications I would do would be to have the waterproof led strips, and where you have to solder the connections use clear silicone to seal the connections so no moisture can cause a short on the strips inside the box. And finally then you could avoid the heat element completely if you buy a sous vide device, you could attach this to the side of the box, set temperature and it would also circulate the water around but make sure that the heater element doesn't rest on the plastic. The downside would be that you would need a lot of fluid so that the sous vide can work at the right depth, but you can use water and hydrogen peroxide mixed together - it just will take longer.
In the previous one the leds heat the liquid more because they are closer so it has partially the same idea. This just has more flexibility and is a bit easier to use. Just make sure it heats up the liquid a little because very yellowed parts take a long time if there is no heat
Hi there ! I want to venture into retrobrighting and repairs in general and I have questions for you. Where did you get the thermometer that goes into the H2O2? Would you recommend a specific one? what about the smallblack box where you intalled the three jacks and the two buttons? Can you reuse the H2O2? if not, how can you dispose of it for minimum eco impact? I love both of your channels and think you do a great job in repair editing and explaining what is going on. Thank you for sharing
The sensor comes with the W1209 board. I posted a link for a 2 pack on Amazon. The small black box he used is called a "Project Box." You can find them in many different sizes on Amazon. You most certainly can reuse your solution, just be sure to funnel it back into its container with the lid on tight.
Hey there, Do you have any other options for the control board to swap another in? The link in the video does not have one attached to it anymore. Thanks for your time!
I'm thinking about making this, I have a bunch of retro console equipment with quite a bit of yellowing. very nice design. I have a few questions if that's okay: 1. Roughly how long would you say does one full treatment take? 2. Does it work on all color plastic or just white/grey ones? I have N64 controllers in green, blue, black and other colors. Does it just restore discoloration or also attack plastic colors?
This is a fantastic build! Very Impressive! Don't leave so much length on your tinned leads tho, you only needed like half of that. Clip em! Thanks for the content man, super cool!
Totally over the top build, I have being messing with retrobrighting for years. My set-up is a large container like yourself, but I put the LEDs horizontal and did not need any soldering, because of the large crate I just did them in a spiral then fed the leads out the top for PSU. I always use hydrogen peroxide high strength cream, works every time. A pain in the ass tho brushing it on every surface.
Great build, thanks for sharing! :) I always wonder how long lasting retrobrighting is... Did the yellowing ever reappear after you restored something?
I think the ultra yellowed sega dreamcast is the only project that has shown noticeable yellowing so far. E.g. when I compared the first gameboy I restored on a video and the second one which was done over a year later they were pretty much the same color so lot of the time it holds the color well
Great invention! :-) Have you ever tried the process for removing the discolouration of other tones of plastic, or will it just whiten/eliminate the yellowing of white plastic?
Hello planning on making a retrobrighting box. I have a question for the power supply did you use three different power supplys or one? Please let me know, thank you very much.
Hello, first of all, i really enjoy your work. One question, do you think it's possible to get back thales of symphonia gamecube color's back ? Thanks a lot for your advise.
Am I right in thinking that the hole you drilled in the box is for the LED lights? As there are 2 cables using the hole I guess the lid and base are wired separately? Does the heater wiring go through another hole? You didn't really show that bit.
why did you used a different power source to power the heating controller? it consumes virtually nothing and the same psu that powers the led stripe would be enough
Like the design, building one myself currently. I am looking for the black control box and having zero luck! Where did you get that from? Thanks again!
Great project; I plan on doing it as an art therapy project and getting going with toy restoration with it. I had a question though. Would using aluminium paint still provide the same reflective surface, or do I need to use the tape? Also if I did use the tape, could I hit it with a clear coat to act as a reasonable insulator? Finally, how much current is the water heater drawing? I'm wondering if it and the strip light have a combined current draw of 10A, in which case, I could run the entire thing on mine off a single power outlet.
I have had really good results with just 2 big "100W" LED lamps overhead. No wiring. The plastics float at the top unless I put glass jars on them to pin them down.
Hey, Odd. Please tell me what size your container is. Can this method be applied to metal things whose paint has turned yellow? Thanks a lot for your help
Wanting to do this project but it seems the controller board w1209 you linked in the description only comes up as box only, so no board or anything, do you happen to have a link to the board itself?
@Odd Experiments Are you sure the LEDs on the sides do anything? It seems to me that you could totally skip the LEDs on the side walls of the container, both in this version and in the previous one, where you put the LED strips on the outside... UV permeates the container walls in a neglible way, so most of the work is done by the LEDs on the lid. The visible part of the spectrum does shine through the plastic walls and contributes to freeing the oxygen atoms, but I doubt any UV does. Did you try to turn off everything but the lid light and compare the time?
I have a question. I'm going to do the same stuff as you did in your vids for my old SNES and N64, and possibly my old gamecube, it needs it ngl heh Well...do you dilute the hydrogen peroxide in water ? D'you put all of it in that container ? And how many liters to you dilute it with ? I'm determinated to do the same thing, theses are my childhood's gift, i want to make them work again. Thank you for motivating us to take care for our games, consoles, and many other stuff.
I purchased almost everything you linked, but you didn't link what that black plastic box you put the switches into was, or what sort of bit you used for the drill on that plastic box.
Apparently research papers have shown that the effectiveness of the peroxide really starts to diminish after about 6%, so you will have no problem cutting your 12% peroxide in half with regular water as a 50/50 ratio will give you 6% concentration. 👍
I'm curious if you went to school for a lot of this. :P Being real this channel has gotten me to want to tinker with my own projects in the future. Any advice for a beginner?
@Odd Experiments, I finally have a separate 12v 5A, 75w power supply. Is it normal for the plug going into the heater side to get toasty along with the relay on the w1209? Both are pretty toasty and I’m still 10 degrees off from hitting my target temperature of 40 C
Where did you get the plastic shell to use for the control box? That's the last aspect I'm missing. I could make it more basic and simply plug all my tools in, but would love to have a control unit like that!
How long do you typically need to expose a part? I know there are many factors, but for example your GameCube front panel restoration. About how many hours did that take?
Something like 8-24h is usually enough. I'm not constantly looking at it so I don't know for sure. I think the front plate was in for 12h or a little more but I don't constantly check on it but just leave it be so I don't know exact times
I'm having an issue with a single 12v DC 5A power supply to power both. When I set it to heat, the relay clicks on and immediately off. Most likely, 5A is not enough.
It must have been a nightmare to film with all that reflective tape, you did it like a champ! Very clever build and use of components👌 Thanks for sharing!🙏
or he put literally 10 different adjusted Pol-Filter on that Lens xD
@@slido-yt 🤣
I have only one word, he's the greatest!
@@ricardocapunay6459 Indeed he [Odd Tinkering] is, Ricky: He's the *greatest one* ever ✌️😁!
I'm not much into restoring and retrobriting stuff myself, but I'm totally making this for sous vide cooking, thank you!
It definitely works for that too. First I was thinking I would use one of those ready machines for this but decided to do this. Great to hear you came up with new use for it. That's ingenuity
I think you shouldn't cook stuff in hydrogen peroxide but I'm not a cook either so wathever.
@@Fellkragen oh no, I'll be using regular water xD
I suggest you to use melted ice, it works better 😬 anyway, for sous-vide cooking you need to circulate water, a controlled heat source is not enough
@@Odd_Experiments so is the heating element necessary? I have been using the sunlight to retro bright some items. But the time frame is just too long.
The Ducktor looks like he was going to a rave!
Your videos have inspired me to take up small electronic repair....I'm just getting started of course, but thank you for inspiring me :)
Dude, you are such a boss for handling tape and other adhesives while wearing latex /vinyl gloves: that must have been such a pain!
I was about ask how you keep the LEDs from shorting out in the water, but then saw you put a separate container inside the bigger one and was like...That makes more sense. :P
The moisture build up on them would surely cause a short, not something I would leave unattended really, or touch accidentally by lifting out anything. Imo you can just buy waterproof led strips that would be better :)
i made mine with tinfoil and clear packing tape...i didn't cut the light and have it looped all over...lit on the bottom instead of the lid...took me 5 minutes and it works like a charm
I'll call that the "Plastic Time Machine 2.0" since it turns yellowed plastic back to original color.
I made my own off the back of this, awesome guide by the way. I used a single 360W power supply to power both the LEDs and the heater all at once, a much more elegant solution in my opinion, even if it does involve a big ugly steel box with a fan bolted to the side of the storage crate. I also wired up the aquarium pump that I saw down here in the comments, it circulates the hydrogen peroxide nicely and gets a more even temperature.
Thank you very much for passing on the knowledge, you deserve a standing ovation. Love the channel!
Looks like i have another project to do. Thank you for this tutorial my friend.
hey dude, I’m doing this build myself and the part you have linked as the controller board is actually just the case for it, which I realized after it arriving. The actual part ships faster than the case itself funnily enough so I’m cool on that part, but I wanted to let you know so you could fix it for anyone else who tries this build.
RIP i wish i would have read this before buying all that stuff, I just went through the exact same thing.
Ok this is the best invention I have seen. I used your first retro bright technique and worked wonders. Now I am wanting to try this process however I am not good at wiring etc. however this looks like it makes it a lot quicker for you. Very creative technique and I say patent this technique. Also I bet you can make a lot of money if you decide to create this and sell it. I would be first to buy it to be honest with you.
The brighter. The better. I always say.
My first retrobrite "box" was a literal cardboard box with foil taped inside and a led strip bent around it, it did work but had to replace the foil once (I only retrobrited about 8 things) as the led strip wasn't exactly flat against the sides it came unstuck and stuck to the plastic items so when lifted tearing it. so far the only things that have reyellowed using that is a Nes and Snes controller which is probably not a coincidence. I then got a led floodlight and retrobrited a white saturn from nicotine white to looking brand new and rather than leaving it in at least a day it only took about 8 hours! I have now made a new box out of a large plastic container and due to it being easier to tape the foil and using a floodlight I expect great results.
I just came to comment on a sunbrighting video, and TH-cam's algorithm suggested this video. It isn't mentioned in the video, but I'm guessing it takes about a day or so for the retrobrighting process to finish? I just left an very yellowed computer's front plastic outside in direct sun light for 3 hot days, and it's almost back to it's default beige color, so I'll leave it for 3 more days to see how far it goes. For those who don't mind a longer waiting time and/or prefer a cheaper (free?) method, it's definitely an alternative. I don't promise it will remove 100% of the yellowing, but it does work and doesn't expose the plastic to chemicals.
Build a box myself with just led strips and aluminiumfoil but this is gonna be a nice upgrade for my summer holiday 😂 building a uv box when there is enough outside 😂
This is, literally, the best thing under the sun. ;D
Looks simple enough. Wonder if I can make a drawer into "The time machine" so I can leave it there. 😋
This is an awesome invention, I am literally waiting for all the parts now to do this myself... I do have one question relating top the condensation.. did it ever cause an issue with shorting the LED's?
Hey heads up the link you have for the W1209 temperature control board is a listing for just the acrylic box. I was waiting a few weeks for mine to arrive and when it finally did I realized what I had paid for was just the case. x.x I found another listing with a set of two boards, so hopefully I'll recieve them soon so I can start building my own retrobright box!
I would add a small aquarium\water fountain pump to the mix to keep the temperature more even in the liquid. Great job!
I literally just made one of these myself earlier today, except that I put the LED tape on the outside facing in through the clear plastic container, then put foil around the outside of that so that I could use the container itself as the liquid holder.
The biggest difference between what you made and I'm doing is I read that using a small amount of oxidizing catalyst (like that found in OxiClean) helps boost the process and can replace the need for additional heat. In addition, I have access to 15% Hydrogen Peroxide so I'm using that instead; it seems to go much faster, though only time will tell if this is as safe for the material.
I decided to do it like this so I can use only as small container as possible to reduce loss of hydrogen peroxide from evaporation
@@Odd_Experiments That certainly makes sense. If I wasn't doing such large computer case pieces and didn't have access to several gallons of H2O2, then I'd probably be in the same boat. I love seeing different ways of tackling the same problem. Thanks for the video!
@@Odd_Experiments plus hydrogen peroxide is hard to find now adays
@@Odd_Experiments Do you recycle the peroxide?
Can you please walk those of us who want to build this exact setup through the wiring process? Thanks.
I am in the middle of making one of these myself - so far so good! I am opting to buy a thermostat controller and plug-in heating element instead of doing all the wiring and programming required for the temp controller, but I'm really hopeful about getting my old consoles looking nice. One note: Hydrogen Peroxide is EXPENSIVE! I was planning to retrobright an old Mac Classic, but I'd have to spend at least $150 on enough H2O2 for its shell, so maybe not...
Love the content! Question about Retrobrightening: does it work on consoles that are colored or only those that are white/transparent? I have a "purple" Gamecube that looks quite sad, could the Retrobrightening help restore the original color you think?
If I remember correctly he's done a retrobrighting of a colored semi-translucent N64. The best visual results come from white/gray/transparent plastics but it can still work well on plastics regardless of color.
I bet The 8 bit guy would love something like this!
It is really really serious revolution.
So I bought everything on your list, but when I hooked up the heater it burnt up the U2 chip. Did you have any circuit from the heater to the thermostat l?
I'm getting some issues here too. When the relay is closed all is fine, but when the relay is opened (connecting k0 and k1) it keeps restarting. It's like a something is shorting. Any help on this?
NICE! I been waiting for this one. Very nice Ret0Brite setup you made and Thank you for sharing!!!!
Adding this to my "highly satisfying videos for no reason at all" list.
Would retrofitting an aquarium work? Or building an aquarium out of mirror glass?
Wouldn't it also be possible to use a rescue blanket instead of tape? It isolates and reflects really well and i would actually say that it would be more effective.
Can you reuse the hydrogen peroxide after the 24 hour treatment or does it lose its oxidizing power to clarify another plastic parts batch?
Just ordered the who set... My Commodore 64, Amiga and GameCube really need some love. Greetings from the Netherlands
No entiendo nada pero fascina ver como construye la caja suprema exterminadora del color amarillo
Hello, thanks for the video. Can I use a simple sous vide device to hold the temperature?
That's very handy to have, my UV tape is always a mess to try to rewind on the spool. I might steal this idea. :)
3:15 That transition, though.
Random question but can you reuse the hydrogen peroxide for multiple applications? I assume multiple batches on the same day but can the hydrogen peroxide be used days/weeks apart?
No. Hydrogen peroxide(h2o2) turns to water(h2o) after its extra oxgen atom oxidizes whatever you add to the solution. Hydrogen peroxide is just water with a extra oxygen atom and that's precisely why it's able to disinfect.
The clear tape you use for the leds, you mentioned that you might want to use extra adhesive to keep them down. Would double sided clear tape be a good solution? that way no additional adhesive needed? The clear tape works for both keeping it from touching the aluminum and allow for extra adhesive for the light strips?
You’re simply awesome.
I'm currently building one similar and have seen this updated version of his previous one and just wanted to say - looking at the comments this build really isn't a beginners project, don't simply follow the video and build one yourself and have no risks. So I wanted to add -
First you MUST connect this to an RCD adapter, when running anything around water it is vital that the power will cut off with a short, don't rely on your house breakers to cut it off for you, especially in the USA where usually there is no RCD for separate sockets etc.
Water + Electricity = Use an RCD.
Second - you can't leave this unattended, so for example say you have made this in your flat or house and have this running in a back room or whatever, overnight.. - don't, make sure you check your power supply and everything is all ok during its first few runs! And not to leave it on carpet. It must be placed on either a concrete floor or tile/slate that can help take the heat off that ground spot, especially the power supply if it is a power brick (recommended). There are TOO MANY cheap power supplies out there online that you can't rely on that may say they are suitable, but when it comes to heating elements running for hours at a time it is not worth having that risk in your home or soldered joints becoming loose etc
Some modifications I would do would be to have the waterproof led strips, and where you have to solder the connections use clear silicone to seal the connections so no moisture can cause a short on the strips inside the box.
And finally then you could avoid the heat element completely if you buy a sous vide device, you could attach this to the side of the box, set temperature and it would also circulate the water around but make sure that the heater element doesn't rest on the plastic. The downside would be that you would need a lot of fluid so that the sous vide can work at the right depth, but you can use water and hydrogen peroxide mixed together - it just will take longer.
Great build and job. Id like to build this, can you tell me what 3 PSU`s you used please.
Great project! I think that, It would be better to connect led strips in parallel not in series. Less voltage drop, easier to connect.
What do you think about using a combination of the set you made before and this one? Without heater and using the led strips around?
In the previous one the leds heat the liquid more because they are closer so it has partially the same idea. This just has more flexibility and is a bit easier to use. Just make sure it heats up the liquid a little because very yellowed parts take a long time if there is no heat
Hi there ! I want to venture into retrobrighting and repairs in general and I have questions for you. Where did you get the thermometer that goes into the H2O2? Would you recommend a specific one? what about the smallblack box where you intalled the three jacks and the two buttons? Can you reuse the H2O2? if not, how can you dispose of it for minimum eco impact?
I love both of your channels and think you do a great job in repair editing and explaining what is going on. Thank you for sharing
The sensor comes with the W1209 board. I posted a link for a 2 pack on Amazon. The small black box he used is called a "Project Box." You can find them in many different sizes on Amazon. You most certainly can reuse your solution, just be sure to funnel it back into its container with the lid on tight.
Hey there,
Do you have any other options for the control board to swap another in? The link in the video does not have one attached to it anymore. Thanks for your time!
I'm thinking about making this, I have a bunch of retro console equipment with quite a bit of yellowing. very nice design. I have a few questions if that's okay:
1. Roughly how long would you say does one full treatment take?
2. Does it work on all color plastic or just white/grey ones? I have N64 controllers in green, blue, black and other colors. Does it just restore discoloration or also attack plastic colors?
Man I am really eager to make this and I know you have a simple wiring schematic but do you have this wiring schematic somewhere in detail?
This is a fantastic build! Very Impressive! Don't leave so much length on your tinned leads tho, you only needed like half of that. Clip em!
Thanks for the content man, super cool!
Hi, in your experience, how long do thes items last before they turn yellow again?
It was very cool
What should be the ratio of water combined with hydrogen peroxide (12%)?
Totally over the top build, I have being messing with retrobrighting for years.
My set-up is a large container like yourself, but I put the LEDs horizontal and did not need any soldering, because of the large crate I just did them in a spiral then fed the leads out the top for PSU. I always use hydrogen peroxide high strength cream, works every time. A pain in the ass tho brushing it on every surface.
Is that 100% (12%) hydrogen peroxide or do you dilute it with water?
Outstanding work
Great build, thanks for sharing! :) I always wonder how long lasting retrobrighting is... Did the yellowing ever reappear after you restored something?
I think the ultra yellowed sega dreamcast is the only project that has shown noticeable yellowing so far. E.g. when I compared the first gameboy I restored on a video and the second one which was done over a year later they were pretty much the same color so lot of the time it holds the color well
Would a horizontal spiral around the tub instead of vertical strips prevent having to solder so many connections? Just a lazy persons pondering..
Great invention! :-)
Have you ever tried the process for removing the discolouration of other tones of plastic, or will it just whiten/eliminate the yellowing of white plastic?
He does the same process on some Nintendo Gameboy and N64 shells that are clear/colored on the main channel
It works best on white and grey. Be especially careful with anything red as it can fade.
Hello planning on making a retrobrighting box. I have a question for the power supply did you use three different power supplys or one? Please let me know, thank you very much.
Really really cool idea!
Hello, first of all, i really enjoy your work. One question, do you think it's possible to get back thales of symphonia gamecube color's back ?
Thanks a lot for your advise.
Am I right in thinking that the hole you drilled in the box is for the LED lights? As there are 2 cables using the hole I guess the lid and base are wired separately? Does the heater wiring go through another hole? You didn't really show that bit.
why did you used a different power source to power the heating controller? it consumes virtually nothing and the same psu that powers the led stripe would be enough
I came back to this video because I thought that it could be used as a chamber for curing resin 3d printings. Let's hope that it will work
Great video! Do you know if i can also use a fish tank heater instead of the one you made?
Yeah I wanted to give this a go too, the issue is the 50” water temp, lol that would fry any fish so good chance you won’t find one
Do I need the clear tape insulation when doing it with the aluminum tape? Can i just put the led strips on top of the aluminum tape?
Like the design, building one myself currently. I am looking for the black control box and having zero luck! Where did you get that from? Thanks again!
Great project; I plan on doing it as an art therapy project and getting going with toy restoration with it. I had a question though. Would using aluminium paint still provide the same reflective surface, or do I need to use the tape?
Also if I did use the tape, could I hit it with a clear coat to act as a reasonable insulator?
Finally, how much current is the water heater drawing?
I'm wondering if it and the strip light have a combined current draw of 10A, in which case, I could run the entire thing on mine off a single power outlet.
I have had really good results with just 2 big "100W" LED lamps overhead. No wiring. The plastics float at the top unless I put glass jars on them to pin them down.
Question sir! Is there a risk with H202 like taking fire or gas evaporate? I mean is it safe if i use this process at home? Thank you!
Hey, Odd. Please tell me what size your container is. Can this method be applied to metal things whose paint has turned yellow? Thanks a lot for your help
Wanting to do this project but it seems the controller board w1209 you linked in the description only comes up as box only, so no board or anything, do you happen to have a link to the board itself?
Hi, great video!
I wanted to know if it was mandatory to use a heater?
@Odd Experiments Are you sure the LEDs on the sides do anything? It seems to me that you could totally skip the LEDs on the side walls of the container, both in this version and in the previous one, where you put the LED strips on the outside...
UV permeates the container walls in a neglible way, so most of the work is done by the LEDs on the lid. The visible part of the spectrum does shine through the plastic walls and contributes to freeing the oxygen atoms, but I doubt any UV does.
Did you try to turn off everything but the lid light and compare the time?
That's definitely better than spray painting to remove yellowing.
Is the process permanant ? a friend of mine told me that after one year the yellow came back .. is it possible ?
I’m currently trying to make this and there are some things missing I didn’t see you include in the description :/
the leds you use are the waterproof ones? i just bought 60w non-waterproof uv leds
Greatest content ever, I love this!!!!
Can you reuse the hydrogen peroxide? If so, for how long or how many times?
The hydrogen peroxide gets consumed in the process. You can reuse it, but it is less effective each time.
Just curious if the yellowing has came back 3 years later
I have a question. I'm going to do the same stuff as you did in your vids for my old SNES and N64, and possibly my old gamecube, it needs it ngl heh
Well...do you dilute the hydrogen peroxide in water ? D'you put all of it in that container ?
And how many liters to you dilute it with ?
I'm determinated to do the same thing, theses are my childhood's gift, i want to make them work again.
Thank you for motivating us to take care for our games, consoles, and many other stuff.
I purchased almost everything you linked, but you didn't link what that black plastic box you put the switches into was, or what sort of bit you used for the drill on that plastic box.
Do you dilute the hydrogen peroxide at all, or do you use it at the full 12%? Love the video!
yeah I'd like to know this too. As that must be ~30 litres of peroxide, super $$$. Surely diluted with water or something?
Apparently research papers have shown that the effectiveness of the peroxide really starts to diminish after about 6%, so you will have no problem cutting your 12% peroxide in half with regular water as a 50/50 ratio will give you 6% concentration. 👍
Went to the store
“I need 5 meters of led strip, a roll of wiring, soldering gun, solder, and a rubber duck”
They thought I was building a bomb 😏
Might solve a mistery...
Or rewrite historyyyy...
DUCKBOMB woowoowoooo
It works with yellow musical keytops? Thanks very much
I'm curious if you went to school for a lot of this. :P
Being real this channel has gotten me to want to tinker with my own projects in the future. Any advice for a beginner?
How about stop commenting useless stuff on the internet and actually conduct a project.
@@petergoestohollywood382 facts ngl
So could you just use an Aquarium heater instead?
@Odd Experiments, I finally have a separate 12v 5A, 75w power supply. Is it normal for the plug going into the heater side to get toasty along with the relay on the w1209? Both are pretty toasty and I’m still 10 degrees off from hitting my target temperature of 40 C
Where did you get the plastic shell to use for the control box? That's the last aspect I'm missing. I could make it more basic and simply plug all my tools in, but would love to have a control unit like that!
How long do you typically need to expose a part? I know there are many factors, but for example your GameCube front panel restoration. About how many hours did that take?
Something like 8-24h is usually enough. I'm not constantly looking at it so I don't know for sure. I think the front plate was in for 12h or a little more but I don't constantly check on it but just leave it be so I don't know exact times
Very cool. Love your channels.
What is the name of the clay-like rubber used to attach the bolts to the parts in the video?
It's possible use wood bulb (2x 26W) for uv? I use oxiding emulsion 40% vol. Thank's
I'm having an issue with a single 12v DC 5A power supply to power both. When I set it to heat, the relay clicks on and immediately off. Most likely, 5A is not enough.
Do you know how many amps all three devices use so you can power all three from a single source?
please help with one source
Could you use an aquarium heater and thermostat for this?
14:51 Also, what is this part even called so i can search for it?
[edit] - Nevermind. its called a Position Terminal Block.
What is the black box you're using for the switches? Also is there a specific amperage of power supply that should be used for this?