You’re right, one thing I still remember to this day was how my goose neck on my 88 blue performer would slip no matter how much we tightened it, and my sole goal was riding wheelies 😂
My ‘88 Pro Freestyle Tour came with this new inverted stem, and I never liked it. First of all, I thought the bike came with the wrong stem due to what’s pictured in the ‘88 catalog. Second, I had recently had my ‘87 Pro Performer stolen, and I was longing for my block stem. Third, although I weighed only 90 lbs when I was 14, I still managed to bend the shaft. In ‘92 I finally found an original 1985 stamped freestyle version of the block stem in white at a bike shop, and begged my mom to buy it for me. I believe it was $35. I had that stem installed and it’s still in place today. 👍
Nice knowledge bro for those who dont know and yes mallet for life My 91 performer didnt have the notch in the bottom piece and also no hole in the top and it came that way from og owner i got it from back in 2008. It has the right stem bolt with hole in it of course. Its random i guess,just like so many inconsistencies BITD. I sold my extra mallet stem last week ironically,im cutting the fat over here,lol
I have the white freestyle stem with the notch but the bottom plate is polished raw , Everything else is the same but i think the plastic hollow bolt cover used to snap because owners did not realise you can slide it out after you have removed the front brake cable so used to pick at it causing slits to develop.
Nicholas buttery yes you are correct. The reaction washer has grooves in it to attach the plastic cap and keep it from “popping” off. I have seen more of the black caps intact than the white ones. I wonder if the color was affected by UV light more. It was definitely a strange stem for GT. The very first time I saw Kevin Jones riding his ‘88 using a Race stem (5 dimple) I knew GT had made a mistake with this stem. I am shocked that they made two different caps for these stems. You would think to save money just case the “freestyle” cap with the notch. It’s not like you can see it unless the bike is upside down. Odd times back then.
Thanks for sharing. I had to put some layers of grip tape inside the channels to keep the bars from slipping. I also used a piece of copper tubing in there to hold bars tight. I never did crack mine, but I kept my stem high because I was tallish and did bend the quill forward and slightly to the left from so many ramp fails. Does "gooseneck" refer to a particular brand of stem? I recall calling them all that name back then?
I think the gooseneck just referred to a generic name for a stem with that design. Grip tape makes sense. I’ve seen guys drill and tap screws in the stem to keep the bars from moving.
Why did some have silver bottoms? And when did they start dating these ? Some later ones ive seen with dates. Also my nos freestyle didnt have a notch on the bottom - crazy
@RSTR0RV3 there was a person on Evilbay making them but I don’t think he advertises them anymore. He made videos on YT so you should try and reach out to him directly. th-cam.com/video/bTJo53UCpUs/w-d-xo.htmlsi=StJ8GLOtGckXD9wP
That’s what a few people did. Either that or they threw on the 1990 PFTTM and Aggressor stem which I think was basically a race stem in design. Top load instead of bottom load. Thanks for watching and commenting!
You’re right, one thing I still remember to this day was how my goose neck on my 88 blue performer would slip no matter how much we tightened it, and my sole goal was riding wheelies 😂
My ‘88 Pro Freestyle Tour came with this new inverted stem, and I never liked it. First of all, I thought the bike came with the wrong stem due to what’s pictured in the ‘88 catalog. Second, I had recently had my ‘87 Pro Performer stolen, and I was longing for my block stem. Third, although I weighed only 90 lbs when I was 14, I still managed to bend the shaft. In ‘92 I finally found an original 1985 stamped freestyle version of the block stem in white at a bike shop, and begged my mom to buy it for me. I believe it was $35. I had that stem installed and it’s still in place today. 👍
Oh yes. You are one walking comprehensive GT encyclopedia, hats off! This should be my Christmas present, thank you!
My 1992 dyno compe survivor has this stem. My bike is a blue and white.
You should make a video on the gen 1 and gen 2 fork and framestanders for those who dont know. maybe do the ame bubble font grips and double bubble.
Love the video man keep up the good work. Maybe do one on all the gt hubs
Thank you
Great video. Great info.
Great video as usual dude🤘🤘
Nice knowledge bro for those who dont know and yes mallet for life My 91 performer didnt have the notch in the bottom piece and also no hole in the top and it came that way from og owner i got it from back in 2008. It has the right stem bolt with hole in it of course. Its random i guess,just like so many inconsistencies BITD. I sold my extra mallet stem last week ironically,im cutting the fat over here,lol
I have to find one for my 91. Iv got the mallet and want to make it correct
bmxmuseum.com/forsale/618461
They are out there.
I have the white freestyle stem with the notch but the bottom plate is polished raw , Everything else is the same but i think the plastic hollow bolt cover used to snap because owners did not realise you can slide it out after you have removed the front brake cable so used to pick at it causing slits to develop.
Nicholas buttery yes you are correct. The reaction washer has grooves in it to attach the plastic cap and keep it from “popping” off. I have seen more of the black caps intact than the white ones. I wonder if the color was affected by UV light more. It was definitely a strange stem for GT. The very first time I saw Kevin Jones riding his ‘88 using a Race stem (5 dimple) I knew GT had made a mistake with this stem. I am shocked that they made two different caps for these stems. You would think to save money just case the “freestyle” cap with the notch. It’s not like you can see it unless the bike is upside down. Odd times back then.
Thanks for sharing. I had to put some layers of grip tape inside the channels to keep the bars from slipping. I also used a piece of copper tubing in there to hold bars tight. I never did crack mine, but I kept my stem high because I was tallish and did bend the quill forward and slightly to the left from so many ramp fails. Does "gooseneck" refer to a particular brand of stem? I recall calling them all that name back then?
I think the gooseneck just referred to a generic name for a stem with that design. Grip tape makes sense. I’ve seen guys drill and tap screws in the stem to keep the bars from moving.
Why did some have silver bottoms? And when did they start dating these ? Some later ones ive seen with dates. Also my nos freestyle didnt have a notch on the bottom - crazy
Who's making repro plastic caps for these? I have a nice polished GT stem like this that I'd love to complete.
@RSTR0RV3 there was a person on Evilbay making them but I don’t think he advertises them anymore. He made videos on YT so you should try and reach out to him directly. th-cam.com/video/bTJo53UCpUs/w-d-xo.htmlsi=StJ8GLOtGckXD9wP
@@atrains right on, thanks brother!
Couldn’t stand the look of it, swapped it out for a OG white ‘86 stamped mallet
That’s what a few people did. Either that or they threw on the 1990 PFTTM and Aggressor stem which I think was basically a race stem in design. Top load instead of bottom load. Thanks for watching and commenting!