Upgraded from an older 18v kit. th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Great job on this one... I especially loved the creativity on the new battery.... Well done Sir. Near the end, I was like, what, no new Black & Decker stickers??? Ahhh, but there you were... Very nice....
Great video as always! I do have a question on the new labels though, do you make them on your own? or do you customize them somewhere? I noticed on the new labels it mentions "Lithium ion" and also the date you restored, probably the new voltage and current as well. Great attentions to details.
Great job! Very inspiring video! What are you using to restore the product labels? If you can provide the exact name/series and the process (inkjet/laser/uv maybe). It looks very good with these details.
Great restoration like others .Could you write a buying web adress at 16:05 charger and did you draw Black&Decker sticker labels or have a web site for this kind stickers?
Hi, I used the same BMS board like you, but the dril doesn´t want to accelerate properly. It stops when the triger is fast pressed. When I bypass the BMS , drill works perfect. Maybe the BMS cut off the power because the bateries are salwaged ones form notebook, in order to prevent owerheating . What do ou think? Thanks.
@@gear_show well this is good point, but why it worked well with 4S battery pack without BMS ( test run only ) and with the BMS board it cut of power when the switch is quickly pressed. When I press the switch gently, it works, but when is more load pushed on the chuck, it stops again..
I find very good that you recycle old proven. Unfortunately, we throw too much for scrap. What is that white cordless screwdriver with which you open the device? I like that.
@@artemiosarmiento6925 not diesel gas, it's too greasy. It's gasoline (or unleaded petrol if you like) which acts as a degreaser. Very handy and cheap to remove old grease and dirt on mechanical parts.
É Black boa tarde comprei uma esmerilhadeira da blek Dek 4:30 e o parafuso que aperta o protetor do disco o suporte de cima a cabeça vem para e não segura o protetor não aperta tentei contato com a fábrica mandaram eu ir na assistência técnica aqui na cidade na avenida João Durval Carneiro eu fui conversei com atendente eles disseram que que tinha que resolver era a fábrica não me deu nenhuma posição fiquei no prejuízo com protetor da máquina folgado o disco fica sem a proteção porque não consigo apertar porque o parafuso é não pega aperto me ajude
You should choose real high drain current 18650 cells and use good BMS 4S40A. Than follow me in this video, it should be work. Please don't mix good and bad 18650 cells.
This probably means the BMS is cutting power to protect the battery cells from over discharging. You need to check if the 18650 cells you are using are fully charged first (not always the case with the original Ni-Cd or NiMH charger). If the cells you're using are high drain current capable : they can be powerful like 2000mAh, however if the current is only 1 or 2A, voltage will drop and the BMS will cut. You need to check the specs of your cells. If you have enough room, you may double the cells in parallel (it helps with the discharge current).
@@Denis-vk4vg jes this is what j heard.if weak cell cant work.j use high drain samsung cell 2000mah.with bosch gsb heavy drain motor about 250watt.and thats trouble
@@Denis-vk4vg 🎚🎙this is what it is.j use 30a bms.it .like only 18a.and with medim load starts to cut.cant handle even 20 amps.j will buy 40a bms.see ja
With all the attention to detail like properly greasing the gears. cleaning, repainting and upgrading the battery pack you made it better than new.
I'm so glad to hear that, thank you!
Will never get bored of your videos GearShow!
Wow, I'm so glad to hear that.
Anh trai mấy con tem của hãng á anh mua ở đâu vậy anh trai.
Upgraded from an older 18v kit. th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Gear Show is "Saving the planet one power tool at a time."
I never miss any of your videos and I love them all. :)
Wow, thank you!
Another grand job returning impact drive to active service nice posting (:-)
As usual, amazing work. One question - what software do you use to create the stickers ?
I use Adobe Photoshop to create those stickers.
Amazing Work Brother ❤️❤️❤️❤️
Thank you so much 😀
Приятно смотреть на ваш профессиональный труд и красивый монтаж видео..)
Love your restorations !!!!
Glad you like them!
Fantastic workmanship!!
Thank you very much!
Very good camera 🤳
Excelente restauración de la pistola de impacto Black & Decker 14.4V, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍🤘
¡Muchas gracias por visitar mi canal!
SUPER!!!
Very good job. I love to watch those batteries getting swapped! Also hope that hand heals good and fast! Keep on filming!
I hope so, thank you very much!
First of all and as always a great video.
Can you clarify for me how or where do you get the original stickers for the screwdriver?
Thank you, I made those stickers by myself.
Комментарий в поддержку канала и ролика, а также труда мастера отреставрировавшего этот шуруповёрт.
cool job as always.👍
Thanks again!
Great job on this one... I especially loved the creativity on the new battery.... Well done Sir.
Near the end, I was like, what, no new Black & Decker stickers??? Ahhh, but there you were... Very nice....
Thank you so much! I made those stickers by myself.
@@gear_show Can you tell me what kind of printer and paper you use for the stickers ??
Ну что сказать? Просто супер вообще классно. Не зря на вас подписан
That is a good idea to restore old things.
Very nice restoration as usual.. I enjoyed your video.
Glad you enjoyed it
Bravo, belle vidéo !!
Merci pour le partage.
De rien, merci de votre visite
Hey Gearshow, love the content and I might follow in your footsteps soon. What BMS'es do you use for your packs?
Glad you love my content, I use 4S40A BMS.
Great video as always! I do have a question on the new labels though, do you make them on your own? or do you customize them somewhere? I noticed on the new labels it mentions "Lithium ion" and also the date you restored, probably the new voltage and current as well. Great attentions to details.
Thank you again! I create it by myself.
@@gear_show That's amazing!! Wish to see more about the labels in your future videos!
@16:16 (or there about).
You didn't use that burned circuit board did you?
What did you choose to replace it? Anything?
Great job! Very inspiring video! What are you using to restore the product labels? If you can provide the exact name/series and the process (inkjet/laser/uv maybe). It looks very good with these details.
I re-made those labels in Adobe Photoshop. You can use high resolution inkjet printer with A4 coated matte silver self-adhesive.
И снова шуроповерт. Удивил так удивил😄
То же самое, но другое
Не совсем это шурик, это импакт, гайковерт короче говоря))))
@@TheJoeBarbaro знаю. Но по сути ударный шуруповерт. Гнездо под биту.
@@God_Dmitriy27 Да. Конечно дрель разделили на более узко специализированные инструменты)))) Понапридумывали)
Good Restoration brother 👍❤️👍
Thank you! Cheers!
Great job as always. Can you tell me what kind of printer and paper you use for the stickers ??
I'm asking myself the same question. ^^
He should say everything in the description. : )
awesome work as always! excuse me what liquid do you use in the minute 3:06? vinegar?
That liquid is used gasoline. I use to clean machine parts.
@@gear_show thank u sir
Great restoration like others .Could you write a buying web adress at 16:05 charger and did you draw Black&Decker sticker labels or have a web site for this kind stickers?
Hi, I used the same BMS board like you, but the dril doesn´t want to accelerate properly. It stops when the triger is fast pressed. When I bypass the BMS , drill works perfect.
Maybe the BMS cut off the power because the bateries are salwaged ones form notebook, in order to prevent owerheating . What do ou think? Thanks.
I think you have problem with the switch.
@@gear_show well this is good point, but why it worked well with 4S battery pack without BMS ( test run only ) and with the BMS board it cut of power when the switch is quickly pressed. When I press the switch gently, it works, but when is more load pushed on the chuck, it stops again..
400k subs deberías tener mucho más buen hombre, as always nice job I like so much your videos. Thanks for sharing! Best regards
Harika. Hatta etiket olayı profesyonel.
Very good job.
You can also polish the plastics. I've heard acetone steam delivers good results.
Excellent work👍👍👍 . Thanks for sharing
I just love your restoration ❤❤. Can you please tell me where can I find these drills for restoration?
I bought them from Japan used products container.
Hi great video. Do you have a video were you convert the orginal charger to take the new battery.
Wonderful content. I think encouraging to other as well
Thank you!
Awesome video .... would you please tell me where do you get the "brand stickers " from ???
I made it by myself with adobe photoshop.
Very good, these are nice works. I love your videos👍🏻👍🏻👏
I have a lot of these wireless devices disabled, how I wished they were near my home🔫🔫😆😆
Glad you like them! I hope you can turn all your wireless devices enabled back with my videos.
Nice work!!!
Wonderful!!!!!
It's time someone did this on TH-cam!! 😂🤣😂
Nice work, seems so easy when you do it. :)
Thank you!
Plz make more and more Videos Like this............ AWESOME 👍
I will try my best
@@gear_show Hello Sir here is a one question ❓
Sir, which BMS circuit do you apply to the 18 volt drill? 4S or 5S.....? Plz Reply 🥰
I love your videos. Thank you.
Glad you like them!
I find very good that you recycle old proven. Unfortunately, we throw too much for scrap.
What is that white cordless screwdriver with which you open the device? I like that.
he have a video about that white screw driver.
Thanks 👍👍
عمل رائع شكرا لك اخي
Nice 👍🏻
Which is good bms for 775 motor?
Yes, It is.
Perfect video keep going
Thanks, will do!
Another great video 😁
Thanks again!
WoW Amazing Yaar👍👍👍👍👍😍❣️❣️❣️
Thank you!
What do you do the leftover material? Such as batteries?
Perfecto brother,,,,,😍😍😍
Thank you!
0:54 what happened to your arm it looks injured 😱
and thanks for sharing this video
I got burned with a motorcycle exhaust when my motorcycle had a flat tire. Anyway thank you!
@@gear_show i hope you feel better soon
Good stuff dude
Glad you enjoyed
What is the Makita Drill used at 0:33? Please tell me the model.
He restored in another video, search it.
Wow you have two black decker impact driver
Yes, I have 12V and 14.4V impact drivers, you know my channel very well.
Engineers must have a lot of of fate on those two tiny ball bearings wich are holding that massive spring.
How did you test the motor before assembly?
Sir,In 14 watts dril,You need 8 pcs Litium 3.7 in series connection and 4s 40 amps BMS?Thank you sir...
You are very super man you was so itelegent 🙂😍😍😍😍😍😍
Many many thanks
It's realy amazing.👍👍👍
Thank you so much 😀
What is the yellow liquid that you put on the gears and nuts?
it's dirty gasoline.
@@E-habdiesel gas?
Yes I reuse the gasoline many times.
@@artemiosarmiento6925 not diesel gas, it's too greasy. It's gasoline (or unleaded petrol if you like) which acts as a degreaser. Very handy and cheap to remove old grease and dirt on mechanical parts.
@@Denis-vk4vg just putting on gears and nuts in the gasoline?no other process to make it new again?
Awesome sir
Thank you for our enjoyment
My pleasure, thank you!
Is it better and powerful then new ??
Wait for 1 clip 👍👍👍👍👏👏👏👏👏
Thank you for waiting :D
I love your videos
Thank you!
exelente video, tambien hize lo de las etiquetas con un taladro que tengo....
Gracias, eso es lindo.
Do you take tools from subs and restore them ?
No I don't.
Super bro 😀
Thank you!
Me: No way he can restore this
Gear Show: Hold my tools
Nice video sir
how or where do you get this original tools labels for brands ?
I made them with adobe photoshop.
Wonderful.
Many thanks!
Hello how meny times can use this battery life ?
Good job gear show
I have never seen such a impact black and decker drill which model is it?
It is black and decker SXR14 type 1,mostly use in Japan.
@@gear_show oh cool
@@gear_show oh cool
very nice bro
Thank you so much 😀
Nice Video
Thanks for the visit
How to remake the nameplate ?Can you make a video to teach me?
Yes, I will show the way how to make the sticker one day.
@@gear_show Thank you for your sharing.😄😄😄
Very good
merci pour la video c'est tres gentil de votre part a bientot
Merci d'avoir visité ma chaîne!
👏👏 Genial
Perfect video
Glad you enjoyed it
Esses trabalhos é show.
Красава!!! спасибо за видео!!!
Я рада что тебе нравится.
Fantastic
É Black boa tarde comprei uma esmerilhadeira da blek Dek 4:30 e o parafuso que aperta o protetor do disco o suporte de cima a cabeça vem para e não segura o protetor não aperta tentei contato com a fábrica mandaram eu ir na assistência técnica aqui na cidade na avenida João Durval Carneiro eu fui conversei com atendente eles disseram que que tinha que resolver era a fábrica não me deu nenhuma posição fiquei no prejuízo com protetor da máquina folgado o disco fica sem a proteção porque não consigo apertar porque o parafuso é não pega aperto me ajude
Where do u find the stickers???
I made it by myself.
Perfect 👍
I always look forward to your posts!
17:24
警参 → 警告
●ご使用の前に取扱説明書を必ず「ま」くお読みください。
↓
●ご使用の前に取扱説明書を必ず「よ」くお読みください。
ニカド電池はリサイクルへ
↓
リチウムイオン電池はリサイクルへ
（ニカド電池 = Ni-Cd, リチウムイオン電池 = Lithium-ion）
Okay, thank you!
J also made one buttery 14.4 bms 4s 30a butt start and stop .what to do
You should choose real high drain current 18650 cells and use good BMS 4S40A. Than follow me in this video, it should be work. Please don't mix good and bad 18650 cells.
This probably means the BMS is cutting power to protect the battery cells from over discharging. You need to check if the 18650 cells you are using are fully charged first (not always the case with the original Ni-Cd or NiMH charger). If the cells you're using are high drain current capable : they can be powerful like 2000mAh, however if the current is only 1 or 2A, voltage will drop and the BMS will cut. You need to check the specs of your cells. If you have enough room, you may double the cells in parallel (it helps with the discharge current).
@@Denis-vk4vg jes this is what j heard.if weak cell cant work.j use high drain samsung cell 2000mah.with bosch gsb heavy drain motor about 250watt.and thats trouble
@@Denis-vk4vg 🎚🎙this is what it is.j use 30a bms.it .like only 18a.and with medim load starts to cut.cant handle even 20 amps.j will buy 40a bms.see ja
Perfect...
Quiero y debo aprender a convertir baterias de ni.cd, ni.mh a li.ion 💪👍.
Gracias por tus videos.
Perfecto bro
Thank you!
Trabalho lindo parabéns.
Where are you from?
From Turkey
Okay, thank for visit my channel.
do you sell the drill
.I can take
I'm sorry I can't sell them.
@@gear_show what are you doing drills
:D