You are not only a dremel master but your lighting for these vids is perfect - not too bright or dim and can always see whats going on. You are multi-talented.
Hi Tuomas, I have only just found your videos and have been slowly watching through them, I have had a Dremel for years, its not like the ones you have, its the first version, I bought it new when they first came out, although I've never really used for that much, just small jobs, however, after watching your videos, I think I'm going to have a lot more use for it now... Thank you for sharing these with us... John...
You're welcome. I was looking to buy a Dremel to make a simple furniture for my desk. For example a wooden storage where I can place a printer on it. But all made with used skateboard decks (maple plywood). My goal is to work with old skateboard decks, and make stuff with... Which one do I have to buy ? My idea is a Dremel 4000...
7 ปีที่แล้ว
David Rachelski I like 4000 model most. Its powerfull and has torque with lower rpm too. 3000 model is good too, but needs higher rpm to get enough torque, that makes bits to run hotter.
Toumas Soikkeli, I sow your videos for the routine table for Dremel. It was so wonderfull that I like to make one for my new Dremel 4000. I start to work with the wood and by the Dremel attachment A576, I open the hole in the wood, but ........... it is very difficult to know que size of the aluminium plate and the distance from one hole to another, to put the screw at the A576. Can you help me ??. As soon as I finish I will send to you the photograph. From Panama, Carlos
A little change for the dust ;) What will happen, if you mount a small chassis under the table and drill some holes into. Then attach a vacuum cleaner to the chassis. may be a solution for this prob ;) Your solution is good too ;) But some more smaller holes will be a good solution for smaller pieces of wood, because the wood will be sucked a bit on the table.
8 ปีที่แล้ว
I thought that i will mostly route grooves, on this job that one hole works well enough. Of course, your succestion is really good and would work nicely. My intention is to make optional dust removing "attachment" someday.. I have just been little busy lately.
A GREAT BIG HELLO Toumas from Canada, my name is Wayne I am a person with disabilities, had both my knee joints replaced in 2014 and now waiting on foot and ankle surgery recovery time is up to 8 months, I have seen other videos on routing tables for Dremels so far you have the best one, is it possible to get a product list and dimension list for this table as I will be doing some projects during my recovery, thanks so much, keep the videos coming, , , , , ,
6 ปีที่แล้ว
Wayne Lauzon I made it from the surplus that i had.. But i try to remember to take measures when im back at home.
+Lazy watchsmith Kiitti. Tämä video ei ihan onnistunut kuten toivoin,.laitoin musiikit vääriin kohtiin ajatuksissani ja taisin leikata liikaa pois. Olisi ollut 20min video alunperin. Nooh, ensi kerralla toivottavasti paremmin.
your work is very presice, the only thing i notice is that you did not mention of any dimension and measurment so i can also build one, i have a dremel model 3000 i love your projects
7 ปีที่แล้ว
mario tomas Thank you. Yep, sorry. This one was something that i just made... I just measure and design details while making. I like to work that way. Im terrible with drawing plans.
GREAT VIDs I watched them all thank you for the insite.. the only critique I can give you is fuck all the stupid dipshits that are negative.. I am happy that you brought your music back it was missing in part 2.. these are your videos do what you want and please keep them coming cause I found these very enjoyable to watch..
There is nothing simple about this project. Beautiful job though. Probably the best I’ve seen done yet.
You are not only a dremel master but your lighting for these vids is perfect - not too bright or dim and can always see whats going on. You are multi-talented.
Richard Fay Thank you very much!
BRILLIANT !!!! such a cool project, I'm totally gonna make one. THANKS!
Great job! Welldone 😉
This is inspiring.. best video for the project..
Super 👍
So talented ... The dremel master
WOW you are certainly a talented man Well Done !!!!
I think I am in love!
Well done 👍👍
Fantastic build!
Colin Rickards Thank you!
Hi Tuomas,
I have only just found your videos and have been slowly watching through them, I have had a Dremel for years, its not like the ones you have, its the first version, I bought it new when they first came out, although I've never really used for that much, just small jobs, however, after watching your videos, I think I'm going to have a lot more use for it now...
Thank you for sharing these with us...
John...
That's great. Its a very usefull tool.
Excellent work. Thanks for sharing these videos with us.
Thank you. Im happy that you liked. I have other diy dremel tools under construction, but i have been really busy atm.. I hope i get them out soon...
Your a genius. I have a Dremel 4000 and I wish I could do all the stuff you do. I'm only a beginner.
Thanks! You have a good start, enjoy.
I love your video I will learn from you thanks.
Thanks for watching it!
Very clever and great workmanship .
+Michael Evans Thank you Michael
Wow, you are really a dremel freak :D
Nice work
Yep. It seems that i am. 😆. Thanks!
You have no idea how amazing this video was...
David Rachelski Thank you!
You're welcome. I was looking to buy a Dremel to make a simple furniture for my desk. For example a wooden storage where I can place a printer on it. But all made with used skateboard decks (maple plywood). My goal is to work with old skateboard decks, and make stuff with... Which one do I have to buy ? My idea is a Dremel 4000...
David Rachelski I like 4000 model most. Its powerfull and has torque with lower rpm too. 3000 model is good too, but needs higher rpm to get enough torque, that makes bits to run hotter.
That's exactly what I wanted to hear. If I'm not wrong, plywood is considered as hard wood. So having torque is interesting, am I right ?
David Rachelski Yes. You're right.
Großartiges Video und eine tolle Arbeit(!)***** Welche Maße hat der Untertisch? Und wie Stark sind die verwendeten Metall Platten?
Toumas Soikkeli, I sow your videos for the routine table for Dremel. It was so wonderfull that I like to make one for my new Dremel 4000. I start to work with the wood and by the Dremel attachment A576, I open the hole in the wood, but ........... it is very difficult to know que size of the aluminium plate and the distance from one hole to another, to put the screw at the A576. Can you help me ??. As soon as I finish I will send to you the photograph. From Panama, Carlos
A little change for the dust ;) What will happen, if you mount a small chassis under the table and drill some holes into. Then attach a vacuum cleaner to the chassis. may be a solution for this prob ;) Your solution is good too ;) But some more smaller holes will be a good solution for smaller pieces of wood, because the wood will be sucked a bit on the table.
I thought that i will mostly route grooves, on this job that one hole works well enough. Of course, your succestion is really good and would work nicely. My intention is to make optional dust removing "attachment" someday.. I have just been little busy lately.
A GREAT BIG HELLO Toumas from Canada, my name is Wayne I am a person with disabilities, had both my knee joints replaced in 2014 and now waiting on foot and ankle surgery recovery time is up to 8 months, I have seen other videos on routing tables for Dremels so far you have the best one, is it possible to get a product list and dimension list for this table as I will be doing some projects during my recovery, thanks so much, keep the videos coming, , , , , ,
Wayne Lauzon I made it from the surplus that i had.. But i try to remember to take measures when im back at home.
thank you so very very much Toumas
nätti peli. tämmöstä jaksais katella pitempäänkin.
+Lazy watchsmith Kiitti. Tämä video ei ihan onnistunut kuten toivoin,.laitoin musiikit vääriin kohtiin ajatuksissani ja taisin leikata liikaa pois. Olisi ollut 20min video alunperin. Nooh, ensi kerralla toivottavasti paremmin.
You know what I like about your job?
It's perfection, I find it inspiring. (Google Translate) =)
Fabricio Tavares Thank you very much!
your work is very presice, the only thing i notice is that you did not mention of any dimension and measurment so i can also build one, i have a dremel model 3000 i love your projects
mario tomas Thank you. Yep, sorry. This one was something that i just made... I just measure and design details while making. I like to work that way. Im terrible with drawing plans.
are your other projects have design ang meesurments i,m a beginner ang i would like to know more of your works, best regards
GREAT VIDs I watched them all thank you for the insite.. the only critique I can give you is fuck all the stupid dipshits that are negative.. I am happy that you brought your music back it was missing in part 2.. these are your videos do what you want and please keep them coming cause I found these very enjoyable to watch..
Do you have some plans? Great work.
Thanks. I supposed to make instructable with plans, but i have been really sick past weeks. I hope i can make it soon.
Do you have a cut list for the entire project? I really want to replicate this!!! How much did it wind costing?
Lara Chan Sorry, i don't have.. i just measured and planned while made it. All material was from my workplaces recycling center, so it was cheap.
Are there anywhere I can get plans for this!?!
The horsepowered router guys say it can't be done while the other finnish guy says 'hold my dremel'
Hi can you please tell me where i can buy those clamp that u are using? Thanks
I bought them from my local hw-store years ago.
Watched this video again ,why don't Dremel make a table with a bigger surface area?
I have been wondering it too. Also dremels table would need some improvements too.
awefull music unwatchable