The cameo is basically the same when it comes to tracing. We have a trace button as well! We can work on other stuff as well while cutting things too. We can work with rolls and let it cut nonstop for things up to 10feet which is pretty cool, they did just drop a new 24in cameo I’m looking at buying it
Excellent excellent 👍🏻👍🏻 wondering if you can use any kind of material on this vinyl transfer like polyester,, cotton or is a specific material to use this vinyl??
Loving that Adobe software....definitely going to give it try. I can always come here when I need advice on how to work with these selections. Thanks and God bless! 🤗
@@HustleNinjas even though it’s small? About 2-5 cm on sleeves. I’m trying to find a specific tool that will allow me to place QR code’s on sweater sleeves and other small garment. Any direction would be great! P.S: just followed, love your channel.
@@edwinescobar4356 It's not really about the size, it's the intricacy of the design. You would have to weed a lot of the negative cavities within the design. You can look into screen printed transfers like supacolor, fmexpressions, etc. and just press it on.
Hi, do you know another program that is free or will cost less than Adobe illustrator and I would be able to do an image trace and do what you did in your video from min 3:40 to min 4:05 when it became lines
Hi! Thanks for this tutorial, it really helped me. However, I have a question. I am a beginner in this topic and just starting heat transfer. I make T-shirts using vinyl (Stahls foil), but I have trouble transferring it. I use 100% cotton T-shirts, I follow the manufacturers' recommendations (temperature and heating time). However, when I remove the transfer (transparent) foil - using the cold and warm method, the transparent (transfer) foil pulls the vinyl very much, as if the vinyl would not stick well to the T-shirt. You on your film take it off with lightness, with one movement of your hand, as if the transparent film could fall from blowing air. And for me it sticks very strongly to vinyl. Why, what could be the cause? The thermal transfer press (ordinary, relatively cheap) heats up well. What am I doing wrong?
Hi Rich, I am looking for the softest inkjet transfer paper to print my own image. Do you have any suggestion? Or did you make a video to show that? Thank you.
I have a Question how come some people do another press for a few seconds after they peel it or is that only for ink transfers?? To like seal it in the shirt all the way? But you don’t need to do that with vinyl?
This one is a bit cheaper: th-cam.com/video/tFg7ZbWcg8E/w-d-xo.html&lc=UgzIMCzAXNHA1lOijtF4AaABAg And then you have the cameos and what not, I'm not a huge fan of them, but they are cheaper.
Great video i must say bro hope everyone is taking advantage of this but before i go Im starting my heat transfer business on a low budget and would like to know if i can use the HP 2775 PRINTER TO USE WITH MY INKJET HEAT TRANSFER PAPER??
That puff vinyl almost look like a patch on the sweater. You in Atlanta? I been watching all your videos during the pandemic. I think I'm about to invest in some equipment. I would love to chop it up with you because I really want to make the right decision moving forward. Great knowledge in your videos. Much respect
I really liked the sweatshirt. Is it a Bella + Canvas? I am new to sweatshirts and I am unsure which brand to purchase. Love all your content. I have binge watched almost all your videos. They are easy to watch and I like the laid back atmosphere. Have a good week. 😺
The puff vinyl link is pinned in the top comment. You get the design on the vinyl through the cutter software of your cutter. For instance I have a cricut so I design my image in canva or photoshop then upload that image into cricut design space. You start with getting a cutting machine and learning how to create designs or buy them from Etsy or other online sources. Hope this helps.
Graphtec Cutter:
bit.ly/myvinylcutter
Cameo Cutter:
bit.ly/cameo-cutter
WALAPress Heat Presses:
bit.ly/walapress
WALAKut Puff Vinyl:
bit.ly/walakut-vinyl
Pattern Heat Transfer Vinyl:
bit.ly/pattern-vinyl
That's hot mang... Lo... Yo it looks like it feel like swade.... Ima get that...
had to watch again. man it looks like a patch.... i want to double color a design like that for my retail.
What’s the name of that sweater ?
Can u use that app n use a cricut
You would need to design it in Adobe Illustrator and then import that file to your Cricut cutting software.
Thank you so much for the great thorough and great quality videos, I’m starting my own side hustle and this information is GOLD, thank you
I didn't think about heating the transfer up before I weed it. That's a good help.
The cameo is basically the same when it comes to tracing. We have a trace button as well! We can work on other stuff as well while cutting things too. We can work with rolls and let it cut nonstop for things up to 10feet which is pretty cool, they did just drop a new 24in cameo I’m looking at buying it
That puffy ninja heat press is dope as hell! I’ve never seen that before!
Rich laughs at his own jokes...lol
My guy!
Excellent excellent 👍🏻👍🏻 wondering if you can use any kind of material on this vinyl transfer like polyester,, cotton or is a specific material to use this vinyl??
Vinyl is pretty universal and can be used on just about anything.
@@NekoPrints thank you excellent..👍🏻
Your camera's getting better and better! super clear!
Waka Puff is nice. Recently purchased from HTW and applied on a few shirts. Also holds up well after a few washes. Thx for the video Ninja - Peace 🤙🏽
How many washes have you done ?
does it still hold up
Thank you brotha man. This video helps alot
You're the MAN for this bro. Puff vinyl? I never knew. Definitely need this in arsenal. Lol
Saw puff vinyl on my toddlers shirt from walmart and now I’m here haha. Super helpful video, as always.
How’d that puff vinyl hold up after washing? Looks super cool! Gonna try some out for sure!
Still looks good!
@@HustleNinjas what puff herb is this?!?
@@HustleNinjas any knowledge on how long or how many washes it holds up for?
i literally love you, i learn sooo much from you
Great video. Why did you not cut green side up?
I also have a graphtec took me awhile to learn it I'm still learning. Thank you for a[[ you do.
😂 you’re hilarious. First video I’m watching on your channel. Thanks for all the great info!
im going to order some of the puff vinyl.
looks really dope
Pinoy Pride on that shelf hehe thank you for this video!
You motivate me a lot bruh
That’s cool, I’m just starting out and it’s a journey to get everything right. Great vid. Thanks 👍🏻
Rich Brotherman Again a great knowledge content your providing to us
Hope more vids on T shirts soon!!
That puff vinyl look pretty cool. Great video! Thanks for sharing.
Super cool. Thanks where did u get the puff vinyl from.
Dude that puff vinyl!! What!?!? Never seen that!!
Hi Rich thanks for the video I was suggesting the other day. Awesome and informative as usual keep it up 👍
Great video. What kind of vinyl is that. I want to make my labels with the material in the America Project Polos. Any Idea. Thanks
Can you put adhesive on the heat press pad so the shirt wont move???...thanks
Great information. Where did you get your purple heat press?
How can I use my adobe ps app for this
You would need to make the design as a vector. Or design it by layer/color
Loving that Adobe software....definitely going to give it try. I can always come here when I need advice on how to work with these selections. Thanks and God bless! 🤗
Thank you. Your videos are very helpful.
nice typ on weeding whike warm.
first time I hear that, but is so obvious.
That puff vinyl is Sick! Im trying to come up in the t shirt game and get to your level of sales. Great video. Jus Subscribed!
Dope vid! Is there any website we can upload our own designs and have them use the puff vinyl for it?
I hope you insert in video the set up of the settings of CE 6000-60 GRAPHTEC
Lol aye man I enjoy watching yo stuff, thanks for the entail dawg especially that puff vinyl that’s hard 👌🏾
Does the vinyl have to match the cutting machine or can we use any brand of vinyl like I have the cricut but do I have to use there brand of vinyl?
Hey! Can I make QR code’s with this and put it on sweaters and tshirts
Better off getting it as a screen printed transfer because that would be hard to weed as vinyl
@@HustleNinjas even though it’s small? About 2-5 cm on sleeves. I’m trying to find a specific tool that will allow me to place QR code’s on sweater sleeves and other small garment. Any direction would be great!
P.S: just followed, love your channel.
@@edwinescobar4356 It's not really about the size, it's the intricacy of the design. You would have to weed a lot of the negative cavities within the design. You can look into screen printed transfers like supacolor, fmexpressions, etc. and just press it on.
Hi, do you know another program that is free or will cost less than Adobe illustrator and I would be able to do an image trace and do what you did in your video from min 3:40 to min 4:05 when it became lines
i have try the puff vinyl by polyflex on a hoodie and its amazing no complaints
Great video! The puff vinyl looks amazing!
Did you use a gildan tshirt?
Hi! Thanks for this tutorial, it really helped me. However, I have a question. I am a beginner in this topic and just starting heat transfer. I make T-shirts using vinyl (Stahls foil), but I have trouble transferring it. I use 100% cotton T-shirts, I follow the manufacturers' recommendations (temperature and heating time). However, when I remove the transfer (transparent) foil - using the cold and warm method, the transparent (transfer) foil pulls the vinyl very much, as if the vinyl would not stick well to the T-shirt. You on your film take it off with lightness, with one movement of your hand, as if the transparent film could fall from blowing air. And for me it sticks very strongly to vinyl. Why, what could be the cause? The thermal transfer press (ordinary, relatively cheap) heats up well. What am I doing wrong?
i got the same problem. its like the vinyl does not even wanna stick to the shirt
Quick question, with the puff Vinyl you can’t create a multiple color logo to cut and press or it’s just solid colors
I have not tried yet
howdy,,,what is the force setting on your cutter?
I didn't know about puff HTV, will buy some through your affiliate link, thanks for the heads-up 😁👌
it will take your brand next level
Q. When ya pressed first one it looked. Like it burnt a square in tshirt does it come out?
Liked and subd been screen printing dtg and vinyl pressing for years.Keep the info comin fam
A lil secret on puff use fleece garments
Hi Rich, I am looking for the softest inkjet transfer paper to print my own image. Do you have any suggestion? Or did you make a video to show that? Thank you.
Neenah brand
What’s the exact name for this vinyl and of what temperature u should be pressing
Very nice. Haven’t seen anything like this. Would it look as good if it were multi-color? Thanks 🙏🏾
For anyone who is have a problem with their vinyl not sticking to your shirt let it cool for a while after pressing worked like a charm!
You need the info of the vinyl. Some are hot peel, some are cold peel
What's best affordable printer
wow i want to try that puff heat transfer vinyl wonder where can i buy this?
Where do you get your shirts and sweaters?
alphabroder.. sanmar.. ssactivewear
Another fire video 🔥
Thank you for posting this!
Hello.. you were saying "command" for the shortcuts did you mean "control"? Am setting up my hotkeys and I feel like you meant the control key
Control on windows, command on mac
can you do a tutorial on using sublimation transfer vinyl aka Siser or Glitter vinyl
I'll look into it.
Dope vinyl 🔥. Def will be trying it out
I have a Question how come some people do another press for a few seconds after they peel it or is that only for ink transfers?? To like seal it in the shirt all the way?
But you don’t need to do that with vinyl?
Do you have a non-vinyl option for white ink designs?
Is there a cheaper option then graphtec cutter?
This one is a bit cheaper: th-cam.com/video/tFg7ZbWcg8E/w-d-xo.html&lc=UgzIMCzAXNHA1lOijtF4AaABAg
And then you have the cameos and what not, I'm not a huge fan of them, but they are cheaper.
while in Canva can you send designs straight to vinly cut machine ?
No
How much that cutter?
What kinda vinyl are you using? Where you get it from
Yo Rich! I'm going to buy your course but I have one question. Are you gonna release a new one soon about new information you've learn?
If needed, yes, but at this time there is no new info that needs to be added.
Where can we buy the heat transfer Puff
Thanks.. good info
Hey, it’s absolutely amazing! Can you please help out with puff vinyl, where I can find it on internet, price and colors?
Great job! Thanks
WALAKut Puff Vinyl:
bit.ly/walakut-vinyl
THE GOAT.
How did u get the logo
Great video i must say bro hope everyone is taking advantage of this but before i go
Im starting my heat transfer business on a low budget and would like to know if i can use the HP 2775 PRINTER TO USE WITH MY INKJET HEAT TRANSFER PAPER??
That puff vinyl almost look like a patch on the sweater. You in Atlanta? I been watching all your videos during the pandemic. I think I'm about to invest in some equipment. I would love to chop it up with you because I really want to make the right decision moving forward. Great knowledge in your videos. Much respect
I also provide the same services at very affordable price if you are interested then comment here
@@wilsonmartin7068 what's your ig or website , dm me at @oddzilllla
I really liked the sweatshirt. Is it a Bella + Canvas? I am new to sweatshirts and I am unsure which brand to purchase. Love all your content. I have binge watched almost all your videos. They are easy to watch and I like the laid back atmosphere. Have a good week. 😺
G180 gildan
Can you do puff with any image or only simple images?
Simple
Would it matter if I get a 15 inch graph tech if I'm only making clothes or is the bigger machine necessary?
I have a bigger cutter, but majority of the vinyl I use is only 15” wide
Is sisser easy weed vinyl good?? How does it hold up with washing
If pressed properly, it should last as long as the shirt.
@@HustleNinjas i see. thanks for the reply? also is it ok if I hot peal? thanks for the quality vids btw. helps a ton
@@kifter4254 Some heat transfer vinyls will be cold peel, some one will be hot, it will tell you on their instructions.
@@HustleNinjas thanks!
How has this held up in the wash?
why noone aswers the question where to get that vinyl paper, or how to get thendesign on them, and how to start
The puff vinyl link is pinned in the top comment. You get the design on the vinyl through the cutter software of your cutter. For instance I have a cricut so I design my image in canva or photoshop then upload that image into cricut design space. You start with getting a cutting machine and learning how to create designs or buy them from Etsy or other online sources. Hope this helps.
Is there a difference between doing HT from supacolor? And doing vinyl?
You're limited on design intricacy and colors with heat transfer vinyl, while you can do full-color intricate designs with supacolor.
Rich!!! Whts the best paper to use?
In regards to which process?
Love your videos
Damn, now i wanna press shirts. Can you do crew neck sweaters amd hoodies with these machines or only cotton Ts?
Yes, hoodie:
th-cam.com/video/5qiNWlccMNQ/w-d-xo.html
Thank you rich! 👍👍🔥
thankyou
What paper do you use
Awesome tutorial, thankyou
What is the ideal temperature for vinyl ?
Dependent on the vinyl, it’ll come with instructions
@@HustleNinjas cricut premium vinyl has no instructions on the packaging or anything.
Im not familiar with cricut vinyl but make sure it’s heat transfer vinyl and not decal vinyl
My main problem is getting the shirt right on the press what did you mean parallel to the press
Is that puff vinyl maybe also there from other companys? Maybe with shipping to EU? Because everything is sold out on the website.
yeah solid vids bruv. cheers for the education. subbed.
Thanks for all the information 💯🏁
Does it make it easier to weed the vinyl under the hot heat press?
Yes, when the bottom platen is warm and you put the vinyl on top of it, it will help heat up the vinyl and make it easier to weed.
Question: the sticky/clear sheet is that already part of the mint vinyl or you have to add that on the colored part before you cut????
Thanks
Already part of it
@@HustleNinjas thanks so much!!!!!
What were your pressure and speed settings for your HTV?
medium to heavy pressure - 10-15 seconds
@@HustleNinjas sorry, I didn’t explain myself. I was talking about the graphtec blade setting. I usually cut my decal vinyl at pressure 10-11
@@Obeysuls96 speed 15 cm/s, force 17.. this will also depend on how much your blade is sticking out of the blade holder
What degrees did u put that on?
Where did you get that he transferred from
Who have the other cutters and how you like it?
Put that puff up ninja up for sale right now I’m copping one ☝️ for sure leggggoooo