Thank you for this video. REALLY helped me. I've been struggling to configure one of the wireless switches. I could got get access to the double click and long click button. I watched your video several times then realized you were pressing "Smart Device" and NOT pressing "Tap to Perform" when creating the triggers on the scene. That's all it took. and Sonoff has no mention of how in their user manual. Without you I would be stuck for another long time.
If you pair the Sonoff Zigbee devices to a differrent hub they will work totally locally. It's not the switch that needs internet, just the Sonoff Zigbee hub :). I have a few Sonoff Zigbee devices paired to deConz and they work really well locally. I believe the Sonoff Zigbee hub can be flashed with different firmware to make it local control as well . Thanks for the great review/tutorial.
Hello I succeeded to add some conditions but it doesn’t work … I have zb button pressed and light on … action = light off … but it doesn’t work … I specified all triggers , not only this … but nothing happened :) if you can help me
@@csongorvarga thanks for the reply. Firstly I'm unsure what type of device to add it as. Secondly it won't discover any type of device. The count down timer seems to be stuck when trying to add a device.
@@paulmccarthy1896 Let's start again from the beginning. Did you manage to add any of them to the Zigbee Bridge in the first place? Are you sure your are adding it to the Zigbee Bridge? Did you reset the button (remove the cover, press the button the reset whole) before trying to pair?
@@csongorvarga I managed to add the pir sensor and have it working in a scene. Where I'm stuck is when I try to add the SNZB 1 to the bridge. I did remove the cover and pressed the rst button. The red led flashes but it can't be found by the bridge
......... have you found a way to reduce the retrigger time on the PIR...(Zigbee) I am using it to switch on stair lights but is not good should you decide to return 30 seconds later it will not switch on the lights and end up walking in darkness......hehehehe
I was just doing the zigbee PIR review today, and I had the same experience. Sometimes it feels like it is a hit and miss and it does not turn on when I expect it to do.
@@BrianB2579 Fair enough. Also, I was never sure whether was it not working because the sensor would not detect motion, or just the scene would not trigger correctly.
![[#36] Реле Sonoff mini/zbmini Extreme, которые СМОГЛИ влезть в подрозетник](http://i.ytimg.com/vi/KHy07K9sgfA/mqdefault.jpg)
![[#36] Реле Sonoff mini/zbmini Extreme, которые СМОГЛИ влезть в подрозетник](/img/tr.png)
Thank you for this video. REALLY helped me. I've been struggling to configure one of the wireless switches. I could got get access to the double click and long click button. I watched your video several times then realized you were pressing "Smart Device" and NOT pressing "Tap to Perform" when creating the triggers on the scene. That's all it took. and Sonoff has no mention of how in their user manual. Without you I would be stuck for another long time.
home assistant, no cloud needed :) and those sonoff zigbee switches work great
If you pair the Sonoff Zigbee devices to a differrent hub they will work totally locally. It's not the switch that needs internet, just the Sonoff Zigbee hub :). I have a few Sonoff Zigbee devices paired to deConz and they work really well locally. I believe the Sonoff Zigbee hub can be flashed with different firmware to make it local control as well .
Thanks for the great review/tutorial.
So if I have a Echo plus I do not need the Sonoff Zigbee hub right?
@@javiersiado I have not tried with an echo plus, but most likely it will pair to the echo plus fine.
Give it a try 🙂
this issue of not beeing able to use the same press for toggle just makes the product absolutely trash....
köszi a videót
Csongor!
Ez Teccik !👍👏
Does it connect to the SmartThings app
You already know that?
this is my problem with toggle.if you find a fix,please show me.thanks
Do these buttons fall asleep after periods of not using it? This introduces lag on some buttons. Thanks
The motion sensor definitely sleeps, but in my experince the button responds to each press.
Спасибо, дорогой друг!
Hello I succeeded to add some conditions but it doesn’t work … I have zb button pressed and light on … action = light off … but it doesn’t work … I specified all triggers , not only this … but nothing happened :) if you can help me
Can you explain in more detail what scenes you have created?
Do you know where I can find a video showing the full set up of the switch. I'm unable to pair and assign the switch to a device. Many thanks.
Where did you get stuck?
th-cam.com/video/hWxMDdh70mk/w-d-xo.html
@@csongorvarga thanks for the reply. Firstly I'm unsure what type of device to add it as. Secondly it won't discover any type of device. The count down timer seems to be stuck when trying to add a device.
@@paulmccarthy1896 Let's start again from the beginning. Did you manage to add any of them to the Zigbee Bridge in the first place? Are you sure your are adding it to the Zigbee Bridge? Did you reset the button (remove the cover, press the button the reset whole) before trying to pair?
@@csongorvarga I managed to add the pir sensor and have it working in a scene. Where I'm stuck is when I try to add the SNZB 1 to the bridge. I did remove the cover and pressed the rst button. The red led flashes but it can't be found by the bridge
Can this switch be used to trigger Alexa routines?
did you figure it out by chance?
Where we can find this app?
It is called eWeLink
you cut out the most important part... removing the battery cover
Oh yes indeed. Since I do these videos after an initial use to get some opinion, I tend to forget small details a few days or weeks ago.
Can these be used to trigger alexa routines? (I have an echo plus to act as hub)
any luck in figure that out? I know the motion can but I can't figure out the button.
@@wtfshuk You can do that through IFTT
......... have you found a way to reduce the retrigger time on the PIR...(Zigbee) I am using it to switch on stair lights but is not good should you decide to return 30 seconds later it will not switch on the lights and end up walking in darkness......hehehehe
I was just doing the zigbee PIR review today, and I had the same experience. Sometimes it feels like it is a hit and miss and it does not turn on when I expect it to do.
@@csongorvarga Thanks for the reply I think I will use the 433mhz PIR instead....pity?
@@BrianB2579 Fair enough. Also, I was never sure whether was it not working because the sensor would not detect motion, or just the scene would not trigger correctly.
@@csongorvarga Tuya Zigbee sensors, including motion detectors, are hit and miss as well when it comes to re-trigger times.
No option to toggle state?
No, I could not find any.
Reverse action has been added, at least when using relay dualr3. All actions are now toggle-abled!