Euphonia Rotary Mixer from Alpha Theta Review
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2024
- Euphonia is Alpha Theta's brand new rotary mixer offering. This is a unique review as Phil had almost no knowledge of the Euphonia before it landed in the Seattle House Mafia Studio.
Approaching the Euphonia rotary mixer with fresh eyes and no expectations, Phil shares his unfiltered likes and dislikes from a seasoned DJ's perspective. Make sure you watch to the end as Phil provides a very clear view on who this mixer is ultimately for, and whether you should consider the Euphonia as your next DJ mixer purchase.
Watch Phil perform a mix using the Euphonia rotary mixer from Alpha Theta:
• Euphonia Alpha Theta R...
#euphonia #alphatheta #euphoniarotary #euphoniarotarymixer #pioneerdj #pioneer #gear #gearreview #gearreviews #djmixer #rotarymixer #rotary - เพลง
I’m getting one. Thanks for the review!
Thanks for tuning in and glad you found it helpful. Check back on the channel this Friday when we launch my mix on this bad boy.
Hey good first impression video. And I would say spot on.
I happen to be blessed to have owned quite a few different rotaries in the past. Including two separate Master Sounds mixers, an ARS, and a Urei. I’ve also played on the Rane 2015 which was one of my favorites.
I sold my Master Sounds mixer the minute I touched the Euphonia. Not because I thought it was better sound wise, but workflow wise with the effects is something quite unique and something that really works well for me.
I have some suggestions for improvements to pioneer that I hope can be handled with firmware updates. For example the routing to the isolator is my favorite feature hands down, but I do feel it should be adjustable as to when the effects kick in.
For instance, some people might wanna run the isolator and maybe have all the knobs 1 o’clock for overall room equalization.
But If you do that, the effect would always be on. unless you have, the button depressed.
It just minimizes the flexibility a bit.
A user definable option to have them kick in at around 1 or 2 o’clock would be great.
I agree on the Shini part two. Although apparently they’ve use some new material that is scratch proof? I believe that when I see it. Until then I’m not putting anything to abrasive on it. But I think it would’ve looked a lot better if they just use the same look as the bottom.
Thanks for jumping in here. I've played on a couple of different Ranes (2015 and 2016) and a Urei but never the others - heard great things though about the ARS and Master Sounds. Also great feedback on the ISOs - my favorite feature as well. I love being able to assign the FX to the ISO and really just having EFX on a dope rotary is a total win. I'm still annoyed they cheaped out on EFX switch. They should've just made it a knob like one of the EQs, but maybe slightly bigger with a rose gold cap - now that would've been classy and felt way better. I'm still unclear if that is a metal or plastic pot - can you confirm?
I didn't think about it at the time but yes, if you are using the ISO to eq out the room, it would be nice to have some additional controls so you can use the ISO as a master EQ and as a performance tool at the same time. Maybe even a master EQ setting/lock, where you could essentially set the ISO for room equalization, lock that setting in and then go back and use the ISO as the performance tool. Likely easier said then done but I like how you're thinking about it and think Alpha Theta should prob offer us both a high paying gig. :)
Yeah, for me, the isolators kind of both a musical performance tool, and an EQ at the same time. If you have a record, that’s needs a little touch of high end you can use the iso. And yes, you can also use the channel Ecue for the same thing, but they are slightly different flavor. I might be nitpicking here. I honestly like the way the mixer sounds with all the bands slightly boosted. So I guess that’s where I’m coming from.
Great review! I own 3 rotary mixers and help design two of them, the Rane MP2015 and MP2014. The Euphonia definitely looks like it would be fun to play on! 🙂
I absolutely love the 2015 and 2014 - you/Rane knocked it out of the park with those. I've been trying to talk a buddy into selling me his minty 2016. We used to have one as a club install and it was a pleasure to play on. You would have a blast on the Euphonia for sure. It's a really interesting mixer for the right buyer.
Great video
I just purchased my euphonia mixer for my event company
(I’m based in LA & San Francisco)
I haven’t opened up the box yet
I’m curious to see how the euphonia Will fair in real time!!
Mad respect from a Chicago deep house DJ , trust me
I’m a real one !!!!
Respect ✊🏿
Vinyl is the best way to go
If you know , you know !!!!
Thanks for tuning in. I'm betting you're gonna dig the Euphonia. Get back at me once you put it through it's paces. Would love to hear your feedback.
@@seattlehousemafia
Will do , 3 house music (legends)
DJ’s / producers will be the 1st to play on the euphonia mixer in august, I’ll definitely tell you what their experience was, in my home studio, my go to mixer is the Pioneer DJ V-10 , although as of late, I’ve been playing on my
Pioneer opus Quad ( 4 giggles )
I like the Opus quad , it’s so smooth,
I recommend the opus quad for an all in one , plug and play set up , very easy to travel with, VS
Hauling around
3 pioneer CDJ 3000’s
And a mixer of your choice !!
Opus quad, shuts that bulky stuff down!!!!!
In my opinion, anywhooooo
Wrap with you in august, keep the videos coming!!
“ cheers “
How does it sound with two Denon SC600's in a four way mix? Thanks.
Don't have access to Denon players but do have CDJ3000 and CD2000JNSX2s. Both sound phenomenal, understandably the 3Ks slightly better (new tech). I ran both via digital in/out. My hunch would be the Denon or any other player with digital out would sound fantastic as well. Have you done a comparison between the CDJ3Ks and the SC600? Though I'm a Pioneer guy, the Denons look really fun and well thought out, just not at all familiar with them.
Mate sounds Dope on the sc6000 - i have 2 sc6000's & 1 Lc6000 - sounds phenomenal 🔥🔥🔥🔥
I have no doubt.
Hey good first impression video. And I would say spot on.
I happen to be blessed to have owned quite a few different rotaries in the past. Including two separate Master Sounds mixers, an ARS, and a Urei. I’ve also played on the Rane 2015 which was one of my favorites.
I sold my Master Sounds mixer the minute I touched the Euphonia. Not because I thought it was better sound wise, but workflow wise with the effects is something quite unique and something that really works well for me.
I have some suggestions for improvements to pioneer that I hope can be handled with firmware updates. For example the routing to the isolator is my favorite feature hands down, but I do feel it should be adjustable as to when the effects kick in.
For instance, some people might wanna run the isolator and maybe have all the knobs 1 o’clock for overall room equalization.
But If you do that, the effect would always be on. unless you have, the button depressed.
It just minimizes the flexibility a bit.
A user definable option to have them kick in at around 1 or 2 o’clock would be great.
I agree on the Shini part two. Although apparently they’ve use some new material that is scratch proof? I believe that when I see it. Until then I’m not putting anything to abrasive on it. But I think it would’ve looked a lot better if they just use the same look as the bottom.
I run mine with the Denons. Sounds great. Both in the analog and digital.
Really enjoyed this video. I have a mint Rane 2016 that I’ve used since it came out. I was just about ready to sell it and get the ARS 9500. Then this thing came out and now I’m not sure. Do you have an opinion on whether this would be better than the 9500??
My reason for thinking about selling my 2016 is I wanted something smaller…
Thoughts?
I use to live in Seattle myself. Ran a record store there for years…
That's a tough one. Personally, I would probably go with an ARS - heard fantastic things about the sound and feel. Betting it would be more Rainesque than the Euphonia. That said, the onboard effects and the ISO effects mapping are so well done and the sound is fantastic on the Euphonia. For context though, I already own a V10 and an A9 so I'm not hankering for another mixer with Pioneer tech, which is why I would choose the ARS for the more industrial/analogue feel - that special something different. You may have the opposite view coming from a 2016 and that "something special" may be exactly what the Euphonia offers. Hopefully not confusing you here. I really don't think you could go wrong with either. You might also take a look at Condesa out of Australia.
What record store? We've likely crossed paths.
I will take a look at the Condesa thanks!
One thing that makes me nervous about the ARS is I’ve read the customer service stinks…. If it breaks you might be screwed…. Have you heard anything like this either?
I ran this store called Platinum Records. Use to be on Capitol Hill.
@@troyroberts2811 Oh man, we have definitely met. At least half my record collection is from Platinum. Capitol Hill, shit Seattle has never been the same since Platinum went away. It was such a crucial pillar in the dance music scene here. Unfortunately, no real experience of feedback with ARS support or lack there of.
I am curious where you'll land on your rotary journey so stay in touch on that piece. Also hit me up if you do decide to get rid of that 2016. I've always loved Rane rotaries.
Ha! Small world. Yeah Platinum was great. It was sad they left town.
I’ll let you know for sure if I decide to sell it. It’s mint condition…. Only 3 or 4 people’s hands have ever touched it. Only ever been in my house.
Yep can confirm mine is already scratched up and impossible to keep clean.
Sorry to hear but it's inevitable. It would be super cool to replace that plastic piece with some stainless or even matching rose gold metal. Really any other material than that plastic crap. Betting there will be some skin options soon enough. How are you liking it besides?
@@seattlehousemafia I love it so far. I have been using it at the end of my live set up chain. I use the outputs on my MPC along with some drum machines and it has been working out great. Overall I am very pleased with the mixer.
Hi mate!.. any opinions about sound comparison with Xone 96? Thanks!
We haven't had a 96 in studio but do love how they sound. My hunch however is once you start pushing the Neve transformers on the Euphonia, it's going to sound superior from a warmth, summing and lack of distortion perspective (was almost impossible to get the Euphonia to distort). That's just a guess though. At a minimum, the 96 came out in 2018 and the Euphonia 2024, so even from a new technology standpoint, Alpha Theta likely has the edge. But again, this is all just speculation and I know there are a ton of die hard A&H fans out there - I've always been a fan as well. To your point, getting both side by side would be the ultimate test - I'll see what I can do.
@@seattlehousemafia I totally agree with you about some faults by AT on a 3800€ mixer, as upper faceplate and quality knobs.. I want get a new rotary (I owned Rane MP2015 and MasterSounds 4V in the past).. I want wait new own product line by Union Audio, manufacturers for MasterSounds ‘til 2 days ago when MasterSounds has stopped..
@@djbobrokk723 We saw the MasterSounds announcement - bummer for sure. The rotary space is interesting right now and Alpha Theta entering the market will hopefully build general awareness. Like I said, I mostly loved the Eupohnia, but definitely had a couple of hangups that you simply don't see from a quality perspective with other boutique rotaries.
get a right angle adapter for your headphone plug so you wont have to tent your hands
Appreciate the feedback, I know it's an easy fix and I have several but I still think it was still quirky placement on the V10. Thanks for watching the review by the way. We really appreciate it.