I will check next time but meanwhile here is the link to buy the bearings with the parts numbers: Spool Support Bearing (RD13274) Stella Worm gear Bearing Counterpart (RD 11018) Stella handle bearing counterpart (RD13269) rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575591865&toolid=10001&campid=5338690692&customid=Stella+Bearing&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FShimano-reel-BEARING-BUSHING-replacements-by-part-number-STAINLESS-CERAMIC%2F124096850349%3Fhash%3Ditem1ce4bfa9ad%3Am%3Am7HCh0tI8dMxHBsqBgMSP6A
Hey bud, I noticed on one of your other upgrade videos on the stradic fl 3000 that there was a shim or washer beside the bushing on the handle knob when you removed it. You made sure you put it back on then the bearing beside it. On this video the shim or washer wasn’t there. Did Shimano forget to put it on from manufacture you think? Even when I upgraded mine there was no shim which left me scratching my head as to why!
It is very possible that they missed it but since this is a smaller-sized reel, it could also be intentional... Hard to say! Either way, it will likely not make a difference. Thanks for the comment and question! Might have some new content coming out soon as well! - Isaac
This can easily be upgraded with the upper worm gear bearing, oscillating paw bearing which are the same. You must order additional oscillating paw bushing. These bearings are 2x5x2.5mm and I would think a combination of 2 bearings of undetermined size would fit better on the paw. I'm working on that now. The rotary support bearing can easily be changed so this reel easily can be changed to a full 12 bearings....perhaps 13. I've done 1-1000'. 1-1000HG,1-3000HG and and a Vanford C3000XG. The next project is a C3000HG Exsense BB. Love the Shimano upgrade Videos
The Carbontex drag washers are a vast improvement over the felt washer. Smoother over all drag pressures and will produce a higher max drag pressure. That has and will always be my first upgrade to any reel. A smooth drag is far more important than a smooth reel. Very good tutorial.
I bought a Stradic FL 3000 after watching the other upgrade video. I have couple questions if you don't mind: 1) what size of Gomexus Power Knob you used to upgrade the Stradic FL 3000 (35mm, 38mm or 44mm)? 2) where did you buy those bearings (eBay, Amazon, PLAT)? Thank you for helpful videos. Best.
That’s awesome man!! I don’t mind at all.. I used the 35mm size power knob and I bought the bearings at my local tackle shop who does reel service. And you’re welcome!! I will definitely be making more upgrading videos! Make sure you’re subscribed for the giveaway!
@@WestCoastFloridaFishing ouch, I ordered a 38mm silver-black on Amazon yesterday (not shipped yet) as the listing says it would fit Stradic FL 1000-5000. www.amazon.com/gp/product/B084JKDTCZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1&psc=1. Do you think it fits my Stradic FL 3000? Thank you.
Jgonzalez awesome! Great investment! I have the video uploaded and I am waiting on making it public for everyone to view. Not exactly sure when but I have another video coming out on how to properly clean your equipment before that. And I might publish a Vanford video before that. Just make sure you’re subscribed and turn on that bell icon so you never miss my videos! It will be out very soon!!
Zeadon Jamil thank you for commenting!! And yeah no problem at all! So to people who fish a lot and really get to use their reels a ton and feel them wear down over time you can bet you will be able to tell the difference.. but without a comparison to how it felt before the upgrade it could be harder to tell! I can definitely feel a small difference in the loss in friction producing a smoother reeling experience! Thanks for the awesome question!
Hello! Super nice video! But i have a question. What kind of grease shall i use for main gear and worm? FG13 and DG16? Or something else? Don't want to use bad greese/oils for it 🙂
Thank you for the nice video! Just ordered the bearings to my 1000 HG. But I'm a little confused about the worm gear Bearing 'RD11018' How come you don't use the washers that the Stella have 'RD9856 and RD18758'? The original bushing has a back cover that will be against the worm shaft retainer. Now will it be the bearing steel against steel. Normally when I'm working with bearings this will be a BIG NO NO! Thanks again for a great video :)
This is 2nd time I watched this video and am enjoying it even more. How much would the complete upgrade of this 1000 HG to the Stella level cost? Also I have a problem with a reel I have and would like your opinion if possible--Doc
Joseph Grossman that’s so cool to hear!!! The complete cost should be the same as the 3000fl and would be just around 55$ or so through my links! And shoot your question boss! -Isaac
@@WestCoastFloridaFishing I had a senior or Bunker Biden moment-B.S.--Before Stradic-- with a Carbon X 2000. I know it is reverse thread but I really tightened the rotor retaining nut to the top of the pinion, without putting the rotor on. Now it is too tight(pinion-rotor retaining nut) to loosen .I managed to take the reel apart and now have this little pinion cartridge with the RRN fixed at the end .You know I spent a lot of my youth where those bearings you use are made. There seems nothing to hold on to-trying not to damage the pinion- to unloosen the nut. Do you need a photo? Call me Doc Thank you Joe " Doc " Grossman, 1/5 Air Cavalry, RVN 1969-70
TyRon Jones it is so super personal when it comes to braid. If you like quiet braid then try suffix 832 or Power Pro SSv2. If you don’t care about noise and want a more abrasive resistant braid normal power pro is great! Spider wire is one of the strongest braids out there so you really have to try a bunch and see what’s your favorite!!
Curious why you did not install washers 9856 and 18758 that are listed on the Stella schematic? IMO, these washers would help with the performance of 11018 bearing. Let me know. Thanks
Great Question! My only answer is that I could not find the parts on eBay and had to opt out of installing them with the upgrade. Hopefully this wont be an issue for the future videos!
What about removing washers 20173 and 18758 from the worm shaft and put the bearing directly on worm shaft then put the 2 washer behind the bearing like on the stella?
They are not the exact same.. in fact you should watch my video on upgrading the Stradic FL 3000 because those are the same parts to the 2500 size.. good luck!!
Hy Bro. Can u tell me all the bearing sizes and the part numbers and whats the name and the number of the busing what goes in to the worm teeth. I want to change all the 6 bearings.
Do you replaced both bushings front and rear with #RD11018? Regarding worm gear bearings or bushings. You mentioned there is one more bushing inside the body of the reel.
Question- I've got a couple of 2500's I've upgraded. The upper worm gear bushing on mine has a flat cut out on the side. Will the upgrade bearing still fit? I've done all the other upgrades. Infinitely better!
I was wondering if you put all the bearings in this reel would it be just like the shimano Stella fj 1000 plus would it be just as good as the Stella fj
Just purchased the same reel just to upgrade, I’m in the process of ordering the bearings but not sure if the bearings you have are ceramic or stainless steel? Might be a dumb question but I’m new to the fishing world.
costa nicolaidis That sounds like an awesome idea.. that would be a long video.. close to 45 minutes.. what do you think about that length? Make sure your subbed for the giveaway!
@@WestCoastFloridaFishing Just show the bushing to bearings. I don't think it would be 45 minutes. Summarise it. Now that would be a cool video. Great one bro. Keep up the good work.
@@WestCoastFloridaFishing It would take too long for you to do it.As a pet project replacing all the bushings with bearings should make quite a difference. You should do it to your reels.
james loerzel I can definitely make one! Shoot send me your reel and I’ll upgrade yours for a video! 😂 if you want to do that send me an email at lockeisaac@yahoo . Com! Anyways thank for the comment man! Hope you enjoyed!
Albert Benedicto I believe that the difference is minimal and not worth the extra 50$ difference between the two.. plus the ceramic hybrids are loud 😳🤭
Yes I do! I Updated the description because it was missing and here is the direct link to the bearing. These bearings are listed by size and the correct size is 8x13x4. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FHigh-Quality-440C-Stainless-Steel-Ball-bearings-Listed-by-Size%2F124156176607%3Fhash%3Ditem1ce848e8df%3Ag%3ARyQAAOSwXj1emJGP&campid=5338690692&toolid=10001&customid=Stella 4k Spool Bearing Hope I've helped!
Yes I do! The part numbers are here: Spool Support Bearing (RD13274) Stella Worm gear Bearing Counterpart (RD 11018) Stella handle bearing counterpart (RD13269) Here is the Link you can use for all of those bearings too! rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575591865&toolid=10001&campid=5338690692&customid=Stella+Bearing&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FShimano-reel-BEARING-BUSHING-replacements-by-part-number-STAINLESS-CERAMIC%2F124096850349%3Fhash%3Ditem1ce4bfa9ad%3Am%3Am7HCh0tI8dMxHBsqBgMSP6AStella
Miguel Gonzalez I haven’t found any negative effects without the washer in my own reels but on the schematic it does show one in there but every reel is different!
There is a large difference between the two. With ceramic they are very loud and noisy. One of the reasons I go for high quality stainless BB. I don't feel the ceramic is worth the money no.
West Coast Florida Fishing thanks! I currently have a 1000 FK, would you say it’s worth upgrading to the FL? I use it weekly for wading so it’s taken a beating.
Noah Harney I would say that if it’s ready to be retired it’s totally worth the upgrade.. again though if you’re strapped on the spare change then maybe it wouldn’t be such a bad idea to hold out a little bit longer.. I went from no 1000 size reel to this one so I am loving it!! If yours feels worn then I’d probably upgrade to the new FL and sell the old one for about 100$!
Nice job, but it would serve you to make sure you have the proper tools on hand. You mentioned the fact that you’ve been through this several times on camera so you should be aware of needed tools. Not trying to be hard on you, really enjoy your content. But that looks bad on your professionalism to use a knife, blade or a Phillips head in a Torx application. Keep them coming, I am a subscriber, and really appreciate the effort you make.
There's no such thing as a 2019 and 2020. It's just the "FL" Shimano upgrades it's reals every few years not every year. And the second letter (in FL) denotes which model version it is, so FL is the most recent one, FK was before, FJ, FI and so on.
I figured that even with a 1000 sized reel I would have enough drag to stop most fish and I was able to put 10# line and I got 165 yards of line so line won’t be an issue at all! Good question!
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
Thank you guys for watching this video make sure to enter in the giveaway by subscribing! Good luck to all who enter!! #500giveaway
who won
Can check what the 2 bearing size for the reel? 7x4x2.5 and? Thanks
TBA! Will make my next video picking the winner!
I will check next time but meanwhile here is the link to buy the bearings with the parts numbers:
Spool Support Bearing (RD13274) Stella Worm gear Bearing Counterpart (RD 11018) Stella handle bearing counterpart (RD13269) rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575591865&toolid=10001&campid=5338690692&customid=Stella+Bearing&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FShimano-reel-BEARING-BUSHING-replacements-by-part-number-STAINLESS-CERAMIC%2F124096850349%3Fhash%3Ditem1ce4bfa9ad%3Am%3Am7HCh0tI8dMxHBsqBgMSP6A
Hey bud, I noticed on one of your other upgrade videos on the stradic fl 3000 that there was a shim or washer beside the bushing on the handle knob when you removed it. You made sure you put it back on then the bearing beside it. On this video the shim or washer wasn’t there. Did Shimano forget to put it on from manufacture you think? Even when I upgraded mine there was no shim which left me scratching my head as to why!
It is very possible that they missed it but since this is a smaller-sized reel, it could also be intentional... Hard to say! Either way, it will likely not make a difference. Thanks for the comment and question! Might have some new content coming out soon as well! - Isaac
This can easily be upgraded with the upper worm gear bearing, oscillating paw bearing which are the same. You must order additional oscillating paw bushing. These bearings are 2x5x2.5mm and I would think a combination of 2 bearings of undetermined size would fit better on the paw. I'm working on that now. The rotary support bearing can easily be changed so this reel easily can be changed to a full 12 bearings....perhaps 13. I've done 1-1000'. 1-1000HG,1-3000HG and and a Vanford C3000XG. The next project is a C3000HG Exsense BB. Love the Shimano upgrade Videos
Seems that the pawl bearing adds more wobble in the pawl than the OE bushing.
Interesting feedback! Love the community you all are building! @@Slazmoservicing4209
The Carbontex drag washers are a vast improvement over the felt washer. Smoother over all drag pressures and will produce a higher max drag pressure. That has and will always be my first upgrade to any reel. A smooth drag is far more important than a smooth reel. Very good tutorial.
Thanks for watching and supporting the channel! I couldn’t agree more!
I just got the 2500FL and love it. put it on a new G Loomis 7'6" med action rod. Great for redfish or bass !! Nice Vid !
That's sweet man! Thanks for the comment stay tuned for all of my giveaways!
Great hands on learning video on how to upgrade reels and how to clean and maintain reels
Glad you enjoyed it man! More to come!
I bought a Stradic FL 3000 after watching the other upgrade video. I have couple questions if you don't mind: 1) what size of Gomexus Power Knob you used to upgrade the Stradic FL 3000 (35mm, 38mm or 44mm)? 2) where did you buy those bearings (eBay, Amazon, PLAT)? Thank you for helpful videos. Best.
That’s awesome man!! I don’t mind at all.. I used the 35mm size power knob and I bought the bearings at my local tackle shop who does reel service. And you’re welcome!! I will definitely be making more upgrading videos! Make sure you’re subscribed for the giveaway!
@@WestCoastFloridaFishing ouch, I ordered a 38mm silver-black on Amazon yesterday (not shipped yet) as the listing says it would fit Stradic FL 1000-5000. www.amazon.com/gp/product/B084JKDTCZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1&psc=1. Do you think it fits my Stradic FL 3000? Thank you.
Boca, makes even better bearings...
If you haven't found out by now they will still fit its just a bigger handle ball size!
I'm going to check this out...
can't wait for the additional upgrades!
Just filmed some today! Little error on my part so ordering a missing part, should have the video published very soon!
West Coast Florida Fishing I just got this reel when will ur new video be up? Would like to do all this this to my reel
Jgonzalez awesome! Great investment! I have the video uploaded and I am waiting on making it public for everyone to view. Not exactly sure when but I have another video coming out on how to properly clean your equipment before that. And I might publish a Vanford video before that. Just make sure you’re subscribed and turn on that bell icon so you never miss my videos! It will be out very soon!!
Thanks for this. But could you explain abit about how the feeling changes with these upgrades? Is it a fairly big difference?
Zeadon Jamil thank you for commenting!! And yeah no problem at all! So to people who fish a lot and really get to use their reels a ton and feel them wear down over time you can bet you will be able to tell the difference.. but without a comparison to how it felt before the upgrade it could be harder to tell! I can definitely feel a small difference in the loss in friction producing a smoother reeling experience! Thanks for the awesome question!
Congratulation. Por favor tipo de destornillador para rd17220, no se cual es??. Muchas gracias
Good tips. Were those bearings the same size?
Hello! Super nice video! But i have a question. What kind of grease shall i use for main gear and worm? FG13 and DG16? Or something else? Don't want to use bad greese/oils for it 🙂
I agree I wouldn’t put anything in my reels other than Shimano drag grease!
Just what I was looking for! Thanks man!
Daniel Jordan no problem bro!!! Glad I was able to help you out with this video!!!
Thank you for the nice video!
Just ordered the bearings to my 1000 HG. But I'm a little confused about the worm gear Bearing 'RD11018' How come you don't use the washers that the Stella have 'RD9856 and RD18758'?
The original bushing has a back cover that will be against the worm shaft retainer. Now will it be the bearing steel against steel. Normally when I'm working with bearings this will be a BIG NO NO!
Thanks again for a great video :)
500 giveaway- Good job
Thank you! Make sure you comment on my fish tank video and are subscribed to be entered in my giveaway!
Great video only suggestion would be to give or name the sizes of the bearings as you go , But good to know what you did.
I will definitely do that in my next videos with a caliper tool! Thanks for the great suggestion. I’m glad you enjoyed the video!
Nice video!!! I’d Love to see more !!
You got it dood!
Awesome video man! Definitely makes me wanna get into fishing!
Awesome! Maybe one day!
Stradic the best amigo
Couldn't agree more! Best reel for the money!
This is 2nd time I watched this video and am enjoying it even more. How much would the complete upgrade of this 1000 HG to the Stella level cost? Also I have a problem with a reel I have and would like your opinion if possible--Doc
Joseph Grossman that’s so cool to hear!!! The complete cost should be the same as the 3000fl and would be just around 55$ or so through my links! And shoot your question boss! -Isaac
@@WestCoastFloridaFishing I had a senior or Bunker Biden moment-B.S.--Before Stradic-- with a Carbon X 2000. I know it is reverse thread but I really tightened the rotor retaining nut to the top of the pinion, without putting the rotor on. Now it is too tight(pinion-rotor retaining nut) to loosen .I managed to take the reel apart and now have this little pinion cartridge with the RRN fixed at the end .You know I spent a lot of my youth where those bearings you use are made. There seems nothing to hold on to-trying not to damage the pinion- to unloosen the nut. Do you need a photo? Call me Doc
Thank you
Joe " Doc " Grossman, 1/5 Air Cavalry, RVN 1969-70
Doc that would be super helpful to get a few pictures of the situation, email me: lockeisaac@yahoo.com
Hey man! love the video. I just put in an order for my Stradic Fl 1000 5.1:1. I was wondering, what line are you using on your reel?
TyRon Jones awesome brother!! Super glad you liked it! And sweeeet and on the 1000 I have 10lb Suffix 832! Love it on there!
@@WestCoastFloridaFishing would you take suffix over fireline? Or what brand of braid would you recommended!
TyRon Jones it is so super personal when it comes to braid. If you like quiet braid then try suffix 832 or Power Pro SSv2. If you don’t care about noise and want a more abrasive resistant braid normal power pro is great! Spider wire is one of the strongest braids out there so you really have to try a bunch and see what’s your favorite!!
Curious why you did not install washers 9856 and 18758 that are listed on the Stella schematic? IMO, these washers would help with the performance of 11018 bearing. Let me know. Thanks
Great Question! My only answer is that I could not find the parts on eBay and had to opt out of installing them with the upgrade. Hopefully this wont be an issue for the future videos!
What about removing washers 20173 and 18758 from the worm shaft and put the bearing directly on worm shaft then put the 2 washer behind the bearing like on the stella?
Great video. Im buying the 2500 fl are the replacement parts the exact same as the 1000?
They are not the exact same.. in fact you should watch my video on upgrading the Stradic FL 3000 because those are the same parts to the 2500 size.. good luck!!
Thanks for sharing the upgrades. Was actually looking for a awesome UL gear set up. Thanks for posting the upgrades. #500giveaway
This was perfect for you then! Thank you for watching man and good luck!!
Hy Bro. Can u tell me all the bearing sizes and the part numbers and whats the name and the number of the busing what goes in to the worm teeth. I want to change all the 6 bearings.
Do you replaced both bushings front and rear with #RD11018? Regarding worm gear bearings or bushings. You mentioned there is one more bushing inside the body of the reel.
New video for a HUGE upgrade process in the works!
This reel stardic and shimano vanford with one i choose buy...
Vanford Unboxing video coming out within a couple days!
@@WestCoastFloridaFishing thank you
น่าจะwork ตบมือๆ you’re welcome!
Great videos
Ntimfo Thank you!!
wow you are one of the smartest people i know
Wow thank you!
Love the videos man!! Keep it up! Cant wait to see future videos!
#500giveaway
Thanks budddddyyy!
Nice Upgrades - @
zymurgist1 thank you! Make sure you’re subscribed and follow the rules to my giveaway!
Would you happen to have the part numbers to do this to the 5000 fl
Nice work!
Both the worm gear bearing and handle bearing are the same and the spool support bearing number is RD17751 good luckb
There you go.. hope it's not too late hahaha congrats for new stradic 10000hg #500giveaway
Haha as long as you commented on the fish tank video and this one and are subscribed you will be entered! Good luck!
@@WestCoastFloridaFishing yes sir 🌊
@@WestCoastFloridaFishing any update for giveaway announcement? thanks 👌
Soon!
Question- I've got a couple of 2500's I've upgraded. The upper worm gear bushing on mine has a flat cut out on the side. Will the upgrade bearing still fit? I've done all the other upgrades. Infinitely better!
Excellent video
Can you please attach links for the bearings?
Yes I can! I just got off work and I will add them in a few minutes! Thanks for the comment!
I was wondering if you put all the bearings in this reel would it be just like the shimano Stella fj 1000 plus would it be just as good as the Stella fj
Very Helpful,
Just purchased the same reel just to upgrade, I’m in the process of ordering the bearings but not sure if the bearings you have are ceramic or stainless steel? Might be a dumb question but I’m new to the fishing world.
Great vids once again. Battling to find FL schematics. How many bushings are their on the FL??
Don't worry i found it. Why don't you do a vid with all the bushings to bearings.
costa nicolaidis That sounds like an awesome idea.. that would be a long video.. close to 45 minutes.. what do you think about that length? Make sure your subbed for the giveaway!
@@WestCoastFloridaFishing Just show the bushing to bearings. I don't think it would be 45 minutes. Summarise it. Now that would be a cool video. Great one bro. Keep up the good work.
costa nicolaidis I’m not sure.. it would be kind of fun to do it so it’s definitely on the list! Thanks for the support man!
@@WestCoastFloridaFishing It would take too long for you to do it.As a pet project replacing all the bushings with bearings should make quite a difference. You should do it to your reels.
Well there is 2 bushings on that wormshaft btw ...
man you had me at "subscribe" with the FK upgrade video lol...loving the content..look forward to more..
Haha awesome to hear brother! I’m glad you’re liking what I’m putting out! More to come!
Nice reel man 💪🏽
Jayven Fitzpatrick thanks man! And good luck on the giveaway!
I would love a video on upgrading a diawa tatula LT..... I can't find one any place.
james loerzel I can definitely make one! Shoot send me your reel and I’ll upgrade yours for a video! 😂 if you want to do that send me an email at lockeisaac@yahoo . Com! Anyways thank for the comment man! Hope you enjoyed!
Part numbers for the 4000 please and I assume the installation is the same
Check out my youtube video doing this upgrade on the 3000 size stradic FL and mostly everything is the same except for the spool support swap.
What’s better, stainless steel bearings or ceramic hybrid?
Albert Benedicto I believe that the difference is minimal and not worth the extra 50$ difference between the two.. plus the ceramic hybrids are loud 😳🤭
What kind of line are you using??? You might have mentioned it, but I missed it...
I have the reel spooled up with 10lb spiderwire super smooth! I like it so far.. good question!
Great video!!
I’m glad you liked it!
Do you recommend any upgrades for a saragosa 8000? If so, which part numbers? Thanks
Marquis G that thing is top of the line already!!! I have nothing to say as far as upgrading that beast!!! Awesome reel man!!
Do you have the link to the Rd 13274 part?
Yes I do! I Updated the description because it was missing and here is the direct link to the bearing. These bearings are listed by size and the correct size is 8x13x4. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FHigh-Quality-440C-Stainless-Steel-Ball-bearings-Listed-by-Size%2F124156176607%3Fhash%3Ditem1ce848e8df%3Ag%3ARyQAAOSwXj1emJGP&campid=5338690692&toolid=10001&customid=Stella 4k Spool Bearing Hope I've helped!
I need to upgrade new stradic 5000xg can you help me with part numbers to add 3 ball Bearing like you made
Yes not a problem the only different bearing would be the Spool Support Bearing and the part number is RD17751! Good luck!
thank you!
I got my shimano stradic fl today it’s says hg what dose the hg stand for?
High Gear. Usually 6.1:1 ratio.
Standard are 5.3:1
Love these kinds of videos! #500giveaway
Awesome I love making them for you guys! Good luck! Make sure you’re subscribed!
So I’m looking for a set up to buy any recommendations for a rod and reel ? 4K Stradic fl on what rod ? For snook offshore
Yes I'm glad you asked! I would pair that 4000 Stradic with a St. Croix Tidemaster 10-20 line rating or a 10-20 Avid Inshore (both St. Croix rods)
What parts should I buy for a stradic c5000xg
what is the part no. for brass bushing in the anti reverse part ?
Dude welcome back. Its been a while
#500giveaway
Asher Skylark Yes!! Good to be back with some more content.. this virus epidemic is crazy! Good luck in the giveaway!
The last bearing won't work well if you insert it like that, you should use a spacer to distance it from the metal part which closes the hole.
Seems to do the trick for me without the spacer shim.. would love to see if it holds out in the long run!
Which one
Whats correct bushing and Bush size Vasili
I’m gonna have to do some upgrades
Daniel Connolly for sureeee dog
Stradic FL the best.
System seal maximal.
#500giveaway
Poetra Rosmiyati make sure you are subscribed and commented on my fish tank video if you would like to be entered!
#500giveaway Best reel for the money.
I totally agree!!! Absolutely the best under 400$
Do you have the part numbers for the stradic fl 2500hg? For the 3 bearings.
Yes I do!
The part numbers are here:
Spool Support Bearing (RD13274)
Stella Worm gear Bearing Counterpart (RD 11018)
Stella handle bearing counterpart (RD13269)
Here is the Link you can use for all of those bearings too! rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575591865&toolid=10001&campid=5338690692&customid=Stella+Bearing&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FShimano-reel-BEARING-BUSHING-replacements-by-part-number-STAINLESS-CERAMIC%2F124096850349%3Fhash%3Ditem1ce4bfa9ad%3Am%3Am7HCh0tI8dMxHBsqBgMSP6AStella
@@WestCoastFloridaFishing thank you so much for the infos. You're the best 👌 💓
Nahhhh you da best! Stay tuned for the giveaway coming very very soon!
can you give me part numbers for 3 bearings? RD13269 RD13274 and last bearing part number?
They are all in the description along with the links to buy them!
Does the worm gear bearing need a washer ? They sent me one thats why. Thanks
Miguel Gonzalez I haven’t found any negative effects without the washer in my own reels but on the schematic it does show one in there but every reel is different!
4*6*0.1 bushing need I guess
New sub...but can you give me those bearing sizes please?tq
I’ll try to put the calipers on the bearings to get the exact sizes!
#500giveaway Good luck everyone!!
You’re entered good luck!!
im in boss
You’re in what boss?
good work eye sac :) #500giveaway
Thanks Broduer! (Your entered btw)
hi, also applies to size 3000 ?. THANK YOU
Gennaro cesarano I have a video out of me doing the same thing to a 3000 Stradic!!
,@@WestCoastFloridaFishing thanks.
Is there alot of difference between the stainless bearing and the hybrid ceramic? Is it worth the extra money?
There is a large difference between the two. With ceramic they are very loud and noisy. One of the reasons I go for high quality stainless BB. I don't feel the ceramic is worth the money no.
I bought a hybrid ceramic bearing for RD11018 I will see how it goes for the Stradic upgrade
What shimano grease type do u use on this upgrade?
which grease do you use and where can I purchase some?
I use the original Shimano drag grease. You can find it online on eBay or possibly a local tackle store
will this work with the stradic ci4 1000 sizee??
Yes it will!! Good luck! Don’t forget I have links to all of the bearing you need in the description!
#500giveaway that’s a great reel
Noah Harney it’s one of my new favorites.. good luck on the giveaway!!
West Coast Florida Fishing thanks! I currently have a 1000 FK, would you say it’s worth upgrading to the FL? I use it weekly for wading so it’s taken a beating.
Noah Harney I would say that if it’s ready to be retired it’s totally worth the upgrade.. again though if you’re strapped on the spare change then maybe it wouldn’t be such a bad idea to hold out a little bit longer.. I went from no 1000 size reel to this one so I am loving it!! If yours feels worn then I’d probably upgrade to the new FL and sell the old one for about 100$!
Im entered
Awesome news!! Good luck! Have that video coming out very shortly
West Coast Florida Fishing Rock on!
New sub
Wyatt heacock awesome to hear! Plenty of content rolling out soon!
what line is that?
That is Invisibraid ultra cast spider wire! (10lb)
Nice job, but it would serve you to make sure you have the proper tools on hand.
You mentioned the fact that you’ve been through this several times on camera so you should be aware of needed tools.
Not trying to be hard on you, really enjoy your content. But that looks bad on your professionalism to use a knife, blade or a Phillips head in a Torx application.
Keep them coming, I am a subscriber, and really appreciate the effort you make.
How are you finding the 1000 FL so far?
I absolutely love it. 7lb of drag is so surprisingly tough..
Also whats the difference between the 2019 fl and the 2020 version?
There's no such thing as a 2019 and 2020. It's just the "FL" Shimano upgrades it's reals every few years not every year. And the second letter (in FL) denotes which model version it is, so FL is the most recent one, FK was before, FJ, FI and so on.
Exactly what he said.. same reel.. manufactured at a different time! They are both the most current reel offering for the stradic to date!
Im enterd i will win
That giveaway is unfortunately over with!
I am entered. #500giveaway
Ntimfo hell yes you are! Good luck man!
where can I buy those bearing??
Try your local reel repair shop! If they don’t have it your best bet is on eBay . Com!
Thanks
Dumb question what's the point of upgrading?
Makes the reel overall smoother and last longer! All for our fishing pleasures!! Good questions my man!
Bro! Why Stradic FL 1000S?
I figured that even with a 1000 sized reel I would have enough drag to stop most fish and I was able to put 10# line and I got 165 yards of line so line won’t be an issue at all! Good question!
So does this now have a 10 BB ?
W C yessir! I have a very long video coming out soon creating a Stradic with 13 Ball bearings!!
@@WestCoastFloridaFishing wow. Looking forward to it.
Is it alot smoother with the updraded bearings?
W C HUGE difference.. we’ll worth the money in my opinion... spending roughly $125 in Shimano genuine parts and about $25 in labor though!
@@WestCoastFloridaFishing how much are these bearings?? Im in Australia. The reel costs $270AUD
W C from the link I provide that isn’t true genuine Shimano bearings they cost about 12.37 aud each!
Did you put all those spool shims on yourself? Or did it come from Shimano like that?
It came right out the box just like that! Only spooled it up at work before I recorded it!
Done subscribe sir
Get more videos with upgrades !) #500giveaway
I have another one in the works!
Surely you buy me a Stradic 1000
Hah.. yeah.. maybe for a future giveaway ;)
I'm entered #500giveaway
Awesome!