Adding PERMANENT Light Seals to a Canon AE-1 Program SLR Camera
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2022
- Below are some of the things (or similar) that I use in the video. Again, these links help support me and the channel but the majority of these things can likely be sourced locally.
100% Cotton Yarn
(thicker than I used but should be fine) amzn.to/3lLYUtk
Self-adhering Felt Sheets amzn.to/3fR4KWo
The 99% Isopropyl Alcohol I use amzn.to/3xw8PFC
My Royace micro toolset that I use for absolutely everything amzn.to/3ih0EY6
Dental tools amzn.to/3MJdjRX
------------------------------------------
Aside from using my links above, here are some things that really help keep this whole wheel rolling. I always appreciate your support!
CONNECT:
My Website: www.aphotographist.com
Instagram / adamwelch.photographist
Facebook / adamwelchphotographist
------------------------------------------------------------------------
The things below help keep the ball rolling with your support:
My hand-made cyanotypes and silver gelatin prints on Etsy
etsy.me/3gsEilO
'ON THE LEFT: Photographs from the Edge of California' book
amzn.to/3q3STtK
My wild pony book 'FACES OF GRAYSON': bit.ly/FacesOfGrayson
'THE PHOTOMAKER'S JOURNAL' personal notebook
amzn.to/3GntVek
Learn to see your photographs differently with my new book on composition bit.ly/ModernCompBook
CAMERA JOCKEY CLOTHIERS(custom designed stuff for photographers)
bit.ly/CameraJockey
Get 25 FREE Lightroom presets at bit.ly/2UEfqLq
My comprehensive video course and eBook guide to Lightroom: bit.ly/contrastlystore - แนวปฏิบัติและการใช้ชีวิต
![[TH] Esports World Cup : Grand Final](http://i.ytimg.com/vi/sedbKhFYDMo/mqdefault.jpg)
How thick is the vilt that u use?
Hi - you didn't change the mirror bumpers; as you mentioned they had already been changed. Yarn probably isn't going to work for those; do you think that adhesive-backed felt, cut to the correct size, would work?
I think it would suffice for the shock absorption however this is a question that has come up on another video about F3 HP seal replacements. I would attempt to source the thickest felt possible for use in the mirror bumps. I think if I replace any more seals I'll keep using the current felt I have for all but the mirror box and use a thicker felt for that...if I can find it relatively easily.
@@AdamWelch Thanks! I think Amazon sells adhesive-backed felt tape of various thicknesses. Also, there are commercially available furniture pads, intended to stick to the bottom of chairs/couches/tables and prevent floor scratches, which are made of adhesive-backed felt and are thicker. I used these, and cut them to the right size/shape with a razor blade and a straightedge; they seemed to fit correctly!
@@HBNplague Very interesting idea about the furniture pads! I'll have to give it try. If you don't mind let me know if you run into any problems with adhesion or anything else because I'd like to know how those last compared to felt. I assume it would be about the same lifespan.
How thick should the felt be?
It's difficult to say. Most self-adhering felt I've seen seems to be around the same thickness. For the mirror bumps the thicker the better. Then again, if the felt is too thick it might interfere with the operation of the film door.
CAMERA IS SOLD.
where are you from?
Lots of different places.
@@AdamWelch Belgium?
@@pieterdegelder6563 Yes. South Belgium.
@@AdamWelch where? And how can I contact you?
I had a hard choise to make but eventually I got rid of my wife instead of my Nikon gear😆😆😆😆
"The hardest choices require the strongest wills."