Been doing this mod to all my guitars for 38 years. It was when I found out that Eddie Van Halen removed his tone caps. Don't know why it's not a factory standard.
Should work on most pots to make a no load tone control, tone control completely isolated at 10. May need a bit of thought to work out a useful way of producing a blend circuit on a two pick up guitar though.
You could produce a similar result by using a pot with a switch. Two possibilities, rotary switch pots, and pull switch pots. With a rotary switch you would go to "no load" with the knob fully counter clockwise, at "0", the opposite of this mod. Not a problem for a blend pot, no blend at zero, and full blend at 10, pretty much as intuition would expect. For a tone pot it would go from maximum treble cut just before zero, to no treble cut at zero. A little confusing, but I guess you could learn to live with it. A pull switch, any time you want no load, just pull the switch.
Worked like a charm on my Telecaster now equiped with blend pot! Awesome! Thanks
I prefer the circular file since it leaves a notch that you can feel when you're on 10 and when you hit the carbon track
Do you know what, I think I do too! Just feels a little more satisfying! Paul
Great video! Would love to see a another one on swapping wafers in stacked pots for custom values / tapers.
Thanks for making this! I'm currently modifying one of the wafers in an MN taper pot to make it no-load.
Amazing video. Thank you! For a coil split blend mod, do you also need a no load pot?
Been doing this mod to all my guitars for 38 years. It was when I found out that Eddie Van Halen removed his tone caps. Don't know why it's not a factory standard.
Very detailed instruction! Does it work with 50s wiring on les paul though?
Should work on most pots to make a no load tone control, tone control completely isolated at 10. May need a bit of thought to work out a useful way of producing a blend circuit on a two pick up guitar though.
Love this. Thanks
You are welcome!
What I'd you cut it further back? Would you get a more of a noticeable difference in tonal change?
I made the same thing on my strat. Another possibility is to put nail polish transparent without cut anything
Hello, I have a fender Excelsior amp. Was going to do the tone mod. Do you feel a no load would work for an amp? At 10 it would take out the tone?
thanks, good stuff!
You could produce a similar result by using a pot with a switch. Two possibilities, rotary switch pots, and pull switch pots. With a rotary switch you would go to "no load" with the knob fully counter clockwise, at "0", the opposite of this mod. Not a problem for a blend pot, no blend at zero, and full blend at 10, pretty much as intuition would expect. For a tone pot it would go from maximum treble cut just before zero, to no treble cut at zero. A little confusing, but I guess you could learn to live with it. A pull switch, any time you want no load, just pull the switch.
whats the trick to get the pot to "click" when you get it to 10, so that you can actually feel the pot gets bypassed?
File the knotch deeper so you carve into the housing material. The you get that click feel
Forgive my ignorance.
Does this simply replace the organge drop capacitor?
If yes, why do we still use the Caps?
Tried to replace pickups and switch today, and I screwed everything up.
Ah man, sorry to hear that. We’ve all been there if it’s any consolation. I had many mess ups on the path to getting the technique down too. Paul
Он не шуршит после подобных манипуляций?
#20_🇺🇸
ที่ค่าของโวลุ่มเดิมเขาให้มาเกิน254kชดเชยแล้วไว้แล้วแต่ถ้าคุณทำแบบนี้เมื่อเปิดสุดค่าที่ได้จะเท่ากับ250k = ความแรงลดลงหรือเปล่า.!.? 🧐