Did you change the stock linkage on the stock since you upgraded the to 16 inch rear wheel? I think they recommend .75 inch longer. Just wondering as I'm about to go 19 to 16 inch in the rear, 60 tooth sprocket. How many teeth are you running on your sprocket? Thank you! : )
@@Sherman1862 I’m running the stock linkage. I went with a 54 tooth sprocket. It gives the bike a little bit more top speed but, I think I want to try a few different sprockets to see what I like best.
@@2wheelsavage Cool! I'll prob stay with stock linkage and see if I even notice the difference. I bought "The Cheater" 16 inch knobby for the rear. I's pretty damn beefy! Hope it fits! lol. Will try the 60 inch warp 9 sprocket and wheel, I'm "old" and just do trail riding so not as much into high speed, liker hills and technical terrain, might be too much torque though? But I figure that the wheel and tire are heavier so that might mellow out the low gearing. We shall see! Thank you though! Your bike looks awesome! : )
@@Sherman1862 with the cheater tire you may have to shave some knobs off the chain side of the tire. I had to do that with mine. I used a hot knife and now I can run the chain a little looser so it’s not pulling on the motor.
I saw some TH-camr say I could put a few washers on the sprocket to get a bit more room for the chain to clear knobbles. Warp 9 and Charged Cycle Works said it should work, I hope so as The Cheater was a pain to put on the rim!!! Lol.. Anyway, I'll let you know if it works! Lol.. I'll be using a non O Ring Chain too, that is not as wide as stock, so might help with clearance.. I hopew! : )
All the upgrades in the world to my eride pro won’t make me ride like you guys bro! Very sweet. You going to add the ebmx x9000? Orderd mine and arma shock and wheelset, need to get the fork still. Sick video
this track looks so sick! Great riding
Bad Ass E Ride Pro!!! Have Fun! Nice Video!!! : )
Did you change the stock linkage on the stock since you upgraded the to 16 inch rear wheel? I think they recommend .75 inch longer. Just wondering as I'm about to go 19 to 16 inch in the rear, 60 tooth sprocket. How many teeth are you running on your sprocket? Thank you! : )
@@Sherman1862 I’m running the stock linkage. I went with a 54 tooth sprocket. It gives the bike a little bit more top speed but, I think I want to try a few different sprockets to see what I like best.
@@2wheelsavage Cool! I'll prob stay with stock linkage and see if I even notice the difference. I bought "The Cheater" 16 inch knobby for the rear. I's pretty damn beefy! Hope it fits! lol. Will try the 60 inch warp 9 sprocket and wheel, I'm "old" and just do trail riding so not as much into high speed, liker hills and technical terrain, might be too much torque though? But I figure that the wheel and tire are heavier so that might mellow out the low gearing. We shall see! Thank you though! Your bike looks awesome! : )
@@Sherman1862 with the cheater tire you may have to shave some knobs off the chain side of the tire. I had to do that with mine. I used a hot knife and now I can run the chain a little looser so it’s not pulling on the motor.
I saw some TH-camr say I could put a few washers on the sprocket to get a bit more room for the chain to clear knobbles. Warp 9 and Charged Cycle Works said it should work, I hope so as The Cheater was a pain to put on the rim!!! Lol.. Anyway, I'll let you know if it works! Lol.. I'll be using a non O Ring Chain too, that is not as wide as stock, so might help with clearance.. I hopew! : )
Sick video!! have you ever taken yours to a mx track?
@@claystoll6925 There’s a track about 30 minutes from my house that was built for E-bikes. I want to go and rip that track sometime.
All the upgrades in the world to my eride pro won’t make me ride like you guys bro! Very sweet. You going to add the ebmx x9000? Orderd mine and arma shock and wheelset, need to get the fork still. Sick video
@@crank_FPV Thanks! I may add the EBMX x9000. Not very sure though. I’ve already have a ton of money into it.
@@crank_FPV Also good luck with the rest of your build! It’ll be sick!
Whats the size of the rear tire of your buddies bike? The one with the shinkos
@@jannonymus9034 He’s riding a 16 inch Shinko.
How much did you end up getting for the surrron seemed a little steep new bike is dope 🤙
@@1.crowder I ended up getting $3,900. It wasn’t clapped out and I sold it with the new E Ride suspension. Thanks!
Is this stock power?
@@tylerhenderson4244 It doesn’t have any power upgrades.
What lcd screen is that
I put a talaria MX 4 display on it. It connects right up.
It the connector to the screen a five pin in a circle
@@mr_squizzles5443 yes it is