Nissan Skyline GTR big brake kit upgrade for under $2000 R32 R33 R34

Need more stopping power for a high horsepower Nissan Skyline GTR build. The 370z Sport brakes are a cost effective way to upgrade your brake kit. If your wondering how to install the 300zx 370z Akebono sports brakes BBK, I will show you everything you need to know.
370z sport brakes on Ebay ebay.us/pscUmg
supertecracing.com/
Recommended Tools I use
Milwaukee impact wrench amzn.to/3rxgmEt
QuickJacks 5000 lift system amzn.to/3kg39yk
Dremel amzn.to/48E4piJ
Angle Grinder amzn.to/3S30vKS
Angle Grinder sanding discs amzn.to/3H7G9di
Loctite amzn.to/3tvrENm
Sparco Sweatshirt amzn.to/3mhxm1D
Z1 motorsports front 2 piece front rotors www.z1motorsports.com/z1-prod...
370z OEM front sport rotors www.z1motorsports.com/brake-r...
Z1 front caliper adapters www.z1motorsports.com/z1-prod...
Concept Z Performance Rear Caliper Adapters conceptzperformance.com/czp-a...
370z Sport Rear OEM rotors www.z1motorsports.com/brake-r...
370z Z1 Sport SS brake lines www.z1motorsports.com/z1-prod...
Parts in my Build
RB26 PRP block brace www.platinumracingproducts.co...
RB26 PRP spline drive oil pump www.platinumracingproducts.co...
HKS RB26DETT 2.8L full STEP2 stroker kit bit.ly/3ElaULG
HKS Step 1 VCAM bit.ly/2ZEcOlt
HKS Step 2 VCAM bit.ly/3fFyIPX
HKS VCAM PRO bit.ly/3SHLlZA
HKS VCAM crank angle sensor bit.ly/3SE0smE
HKS Step 2 VCAM 50 degree VTC gear up bit.ly/3rFtYMR
HKS Step 2 VCAM camshaft upgrade bit.ly/3IjGj1e
HKS Step 2 Valve Springs bit.ly/3CCTjh5
HKS Valve stem seals bit.ly/3M8aJVU
HKS adjustable exhaust cam gear bit.ly/3SExp2h
HKS Step 2 272 exhaust cam bit.ly/3T0thJP
ARC FMIC bit.ly/3ygjIys
HKS High power silent exhaust bit.ly/3T2Wzrs
HKS high flow cat bit.ly/3ygkPhC
HKS downpipe bit.ly/3rwXUuH
HKS hard piping bit.ly/35DkQif
HKS air flow less adapter bit.ly/3ElalBj
NISMO Timing belt bit.ly/2Rvj3n6
NISMO Fuel Pump bit.ly/3izF4wZ
HKS EVC 7 bit.ly/2FHXg8R
My Camera Gear
Editing computer Apple 2023 MacBook Pro Laptop M2 amzn.to/45soiIS
Main Camera Sony A7IV amzn.to/3vCBdsl
Main Lens Sony 10-18 amzn.to/3HTbLBf
Low light wide angle lens Sony 11mm F1.8 amzn.to/3YrPAeA
Full frame lens Sony 28-70mm amzn.to/3Krddit
GoPro Hero 11 BLK amzn.to/3HVuNZF
DJI RS3 mini Gimbal amzn.to/3l5CkO6
DJI Drone amzn.to/3lnDkLF
Manfrotto Large Tripod amzn.to/3vWXS2D
Manfrotto handle grip/mini tripod amzn.to/3hQPqtp
In car camera mount amzn.to/2Lyd7GQ
GoPro in car mount amzn.to/2TBibij
➢SUBSCRIBE: / jdmrighthanddrive
More JDM RHD
Follow me on Instagram / jdmrighthanddrive
Facebook / joshua.fenske.77
Amazon Storefront www.amazon.com/shop/jdmrighth...
More JDM RHD Content
RB26 machine shop EP1 • EP1 RB26 machining pro...
Artec Performance manifold • Artec Performance RB M...
PRP Block brace and spline drive oil pump • RB26 PRP block brace S...
RB28 HKS step 2 stroker kit • Unboxing HKS 2.8 Step ...
R32 GTR ride along • Nissan Skyline R32 GTR...
Rs Day GTR festival USA • GTR Festival USA The b...
Dai Yoshihara R33 GTR • Dai Yoshihara R33 GTR
VB WRX STI playlist • VB STI build
STI S209 Brandon Semenuk ride along • Watch Brandon Semenuk ...
#r32gtr #nissanskyline #gtr #jdmcars #jdmlife #righthanddrive #jdmrhd #carchannel #rhd #fa24 #perrin #rb26dett #howto
BNR32 factory service manual link below
www.skyline.se/dokument/R32_gt...
All clickable links in description help to support my channel via affiliate commissions paid by sellers. Thanks for your support.

[@True60RS]

I agree, you should not have to modify aftermarket brackets to bolt these on. Especially if they advertise these kits as direct bolt on.

[@JDMRightHandDrive]

Thanks for your channel support.

[@bankai_gtr3995]

Yes make them, I’ve had the same calipers you have for 3 years now and haven’t done the install yet because I need to modify the brackets and my neighbors are sticklers for loud noises 😅

[@JDMRightHandDrive]

Nice to know I am not the only one with a set sitting on the shelf for several years. The sanding disc and the Dremel were not to loud, but that cutting disc on the brake dust shields was very loud. Good luck with your install, hope this video helps you complete your project.

[@kennyb9334]

There really should be an off-the-shelf solution that is truly bolt-on. Anyway, thanks for sharing your experience

[@JDMRightHandDrive]

Glad you found the video helpful. I really wanted to do my best to document all the details the Nissan Skyline community needed to feel confident to install the BBK themselves. I am going to figure out how to develop a direct bolt on bracket and start my own website. That's my goal for this year.

[@joeycostanzo6133]

Knowing the headaches of this install I still decided to do it. I’m not sure if I got a bad front brake kit from z1 but none of the hardware they sent me fits their bracket and neither does the stock bolts. Small issue to have but things I wish I did better: I should have bought “new” calipers from Z1. A whole kit from them is around 1300 and I spent close to that having to rebuild the ones I bought off of eBay. I could have had fresh painted and fully rebuilt calipers for almost the same price. Overall a great video. Thanks for help!

[@JDMRightHandDrive]

Hey Joey, Glad you found the video helpful. Hope you get everything sorted out and the brake install goes good for you. Thanks for watching and have fun with your GTR!👍

[@eminye1]

Good stuff man, appreciate the know how.

[@JDMRightHandDrive]

Glad to help all of the GTR boys out there.

[@kolapodasilva5838]

That brake job looks like an absolute headache with all the modifications necessary. No way i would've done my brakes if i had to do all that. I agree that a direct bolt on alternative would be great

[@JDMRightHandDrive]

I have decided to develop my own direct bolt on set. It will take time and money to pay for laser measurement and CAD design + R&D fees. More to come stay tuned.

[@focusfanatic01]

I have a 92 GTSt and a 98 GTt and the reason why I’ve never done a BBK is due to the lack of straight bolt on kits out there. If you can make this happen. Lemme know. I’m from Washington like you as well.

[@JDMRightHandDrive]

Fellow Washington GTR Nissan Skyline owner, that's awesome. I am going to definitely speak with my connections I have and see see who I can hire to help me with the R&D to create a prototype that is direct bolt on. Stay tuned, not sure how long this will take, but it is something that us Skyline owners need. Thanks for your channel support. 👍

[@devin7632]

The most affordable/ bolt on kit for the front is 350z brembo. All you have to do is drill the mounting holes to 14mm. U can buy brand new reman 350z brembos for 200$ for the pair

[@4444johnnyboy4444]

Concept Z is taking L’s left and right when it comes to ease of installation/fitment 😅

[@True60RS]

Concept Z are the ones that fit, it’s the Z1 Motorsports kit that fit like trash.

[@JDMRightHandDrive]

Just glad the brakes if finally on my car.

[@4444johnnyboy4444]

@@True60RSwhoops! Mixed my words up lol but yeah this is great knowledge

[@xymphoma]

Yeahhhh...if you made some direct bolt ons, I'd buy um from you.

[@JDMRightHandDrive]

I am going to look into developing these for the market. It will probably take me some time.

[@xymphoma]

@@JDMRightHandDrive I'm still learning how to pull my motor so my mechanic can take my pile of parts and change my oil pump. I got some time before I do brakes. =o)