Clock Tales part 3

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 13

  • @624Dudley
    @624Dudley 5 หลายเดือนก่อน +1

    I wouldn’t have thought of using the lathe to help with this chore! Thanks Ade, that’s resourceful. 👍

  • @lucianobellebono5835
    @lucianobellebono5835 5 หลายเดือนก่อน

    Grande Ades, interessante la soluzione che hai trovato per avvolgere le molle. Complimenti. Ciao

  • @djhscorp
    @djhscorp 5 หลายเดือนก่อน

    I built my own spring winder ehich works a treat. The idea of using the lathe was inspirational.Well done Ade.

  • @nobbysworkshop
    @nobbysworkshop 5 หลายเดือนก่อน

    Very interesting video Ade. I really enjoyed watching your technique setting the spring. Cheers Nobby

  • @mperry9025
    @mperry9025 3 หลายเดือนก่อน

    Thanks Ade

  • @SimonHollandfilms
    @SimonHollandfilms 5 หลายเดือนก่อน

    nice fix....you are back using the engineering tool vice...not the small Vevor vice?

  • @mervynprice7009
    @mervynprice7009 5 หลายเดือนก่อน

    That I enjoyed. Only one bit of advice for your future reference, C Bennis Supplies & Services are worth your looking up, because they supply very good quality oils. I know there is also a clockmaker's supplier who services you are doubtless using. So there will be nothing wrong with the oil you have used. Just that, I use an ISO 22 needle oil with an additive to aid its being cleaned from clothing in washing machines. This is a synthetic oil & is obviously longer lasting than a non-synthetic one. This used on my collection of micrometers. Please do not ask me how I got into having around 40 mics & all the standards to keep them accurate!! I also use their ISO 32 Sewing machine oil as a slide oil because it has fabulous rust prevention properties & I find my Super seven saddle floats on it. Clearly these two oils have got to be kept well away from roller bearings, because they will break them.

    • @ade63dug
      @ade63dug  5 หลายเดือนก่อน

      Thanks for the info . I used 3 in 1 for the springs and got mobius 8030 for the pinions but still weighing up options . Cheers Ade

  • @carlpalfreeman8094
    @carlpalfreeman8094 5 หลายเดือนก่อน

    Enjoy that one mate

  • @neilridgewell7927
    @neilridgewell7927 5 หลายเดือนก่อน

    good to see you back in the shed, nicely done mate

  • @Stefan_Boerjesson
    @Stefan_Boerjesson 5 หลายเดือนก่อน

    Nice to watch another video from You. Here drone flying is the major interest but making a chain tension part for the chain saw is waiting.
    Interesting and entertaining video. Being a child, several clocks were disassembled but never tampered with their springs. Some kind of instinct told it could be dangerous...
    About the chuck key. The teacher in metal works had a reputation of being hard. (On guy got thrown up on a 2 meter high cupboard when running the lathe backwards and not reacting on the noise.)
    The first lesson was just: "Don't ever leave the chuck key in the chuck. Then he pointed out a hole in the opposite wall several meters away, and told it was made by a flying chuck key. For newbies, it was the necessary "order".
    Maybe I fell back and pointed that out but hopefully in a respectful way. Still try to keep that in mind even as the lathe usually, not always, has a chuck protection not going down, prohibiting starting the lathe.

  • @gvet47
    @gvet47 5 หลายเดือนก่อน

    Wow if the spring would have cut the cable tie you could have really gotten cut.

  • @1ginner1
    @1ginner1 5 หลายเดือนก่อน

    OI Sunshine, Everyone knows the proper way to wind a spring is to run the chuck in reverse at 500rpm for 3.257 seconds with rubber gloves on and wearing a condom for safety. ARMCHAIR WARRIORS RULE !!!!!!. Best wishes Ade, Mal.