How To Replace A Tire Valve Stem Without Removing The Tire
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2024
- Step by step instructions using basic tools to remove and replace your wheels valve stems. Link to tool below! #bronco #valvestem #wheels
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tool Link:
AME INTL Quick Valve Change Tool
amzn.to/3LwaaUi
Other Options:
Quick Valve Change Tool
amzn.to/3L3SBup
********************************
Laser LAS5540 5540 Tyre Valve Tool Set 3pc
amzn.to/3isloNb
(No stems included)
*******************************
B'laster 16-SL Industrial Strength Silicone Lubricant - 11-Ounces
amzn.to/3o5LXeL
Follow along on:
/ broncosandparts
@broncos.and.parts.garage on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and OBS Ford Truck Parts
FTC Disclaimer
---------
This video was not sponsored. All items were purchased with my own money unless otherwise stated and opinions are my own. If I do receive products for free, I will always disclose it, and always give my honest opinion.
This description contains affiliate links which means if you click on one of the qualified product links, I’ll receive a small commission if you decide to make a purchase. This does NOT cost you anything extra and if you don’t want to use the links you can always search Google and purchase the product separately, no worries.
Thanks ! - ยานยนต์และพาหนะ
This is on sale now!! Under $38.
amzn.to/3LwaaUi
for lube could i use a little motor oil?
I wouldn’t. But in emergency….
Thank you for this video it was just as quick and easy as you showed it. I initially ordered the kit where you have to remove the tire and got nowhere as it is not an easy task with a wide Kubota Tractor tire. This kit was well worth the extra money in time saved.
Excellent clear no waffle video. 👍🏻👏🏻👏🏻👏🏻
Glad it was helpful!
Thanks I never knew you could do it so easy, I will give it a go.👍
Links for kit in video description.
Excellent! Very well done! No BS! No blah blah blah! I was really impressed with your video! I wish all TH-cam videos didn't have so much BS, people listening to themselves talk. Again! Well done!
Thank you
Great heads-up on that tool. Great video.
Thanks. I thought it was pretty neat. Small insurance.
Great video, I needed to do this very thing two months ago to my Bronco. I didn’t know a tool like this existed and had to take my tire to the tire shop.
Thank you!!
Wasn't it cool that the video shows him fixing a Bronco wheel , just like yours !
Dude that's cool😎👍...like how U explain everything....Thank You
No problem. Thank you
Adding this to my Trail kit. Thats cool.
Not a bad option for a few bucks
Great Job !! Looks pretty straight forward
Thanks
this is so helpful! thank you!
Hope it helps
Very nice knowledge 👌 thankyou very much.
Thanks for liking
Your video was honest and awesome
Th is. It was fun to make
Great video. I’m doing this project for 4 tires later this week. Wish me luck.
Take ur time. Don’t bent the j-hook. Lots of lube. Pretty straight fwd
How did it go ?
@@Tonyscasa worked out perfectly
My old valve stem fell into the tire. It’s ok bc the tire is on a trailer that sits in the yard. Everything else worked as you showed. Thank you.
Won’t be an issue
@@BroncosandPartsGaragegreat guy!
Wow! That is awesome! I need that tool! LOL
That's what I get for being cheap. Not replacing those when I change my tires. The hook tool isn't my biggest concern. I don't mind pushing the rubber piece into the tire to be removed next time I have to change tires. So I really just need the funnel and puller parts.
Right on. Out. You don’t want that bouncing around throwing off your balance.
Update: got tool. I now have 2 end pieces of valve stems in the tire. Spinner handle part is in pieces, hands all beat up. First attempt, the edge ripped off the new stem where it was going in. Once I find my valve stems that I set aside for the job, then I will attempt a second one. Wish I had the dead blow hammer. The hook tool looked like a bigger hook than that one. I couldn't get the tool out until it finally just pulled through the rubber and dropped that piece of rubber into the tire.
Update: Now that I used my splitting maul, it went right in without a problem. Then I pulled it out, into place. 👍🏼
Love the Alcoa’s.
I run the same wheel on my ‘74 Bronco.
Forged and tuff!!! We sell them used.
Excellent tools.
In the field- priceless. Link in description of video
Thanks for the tip
No problem!
Thanks for sharing
Thanks for watching!
you can use any funnel that fits, a piston circlip install tool also works.
i've done them with soap and a screwdriver in a pinch.
This one won’t deform. It’s a nice kit
Good job thank you for the info.
Thank you
I just tried this using this exact tool. The valve stem came out fine enough, but for the life of me I couldn’t get the new valve stem into the wheel. I used enough lubricant that Ron Jeremy could slide through a keyhole and hammered the absolute sh!t out of it but the end of the valve stem still wouldn’t go through the hole at the end of the valve stem guide.
Strange. I’ve used it a few times. My first was that video!
This was a super informative and easy video appreciate your quick no BS way of explaining things LOL. You are into sub my friend
Thanks for the sub!
@@BroncosandPartsGarage your video is gonna save me some trouble lol. Lost my wheel lock and found my ole '98 z28 with a flat in the garage lol. Gonna be. A few days before the wheel lock replacement gets here, lucky they still had some it was a good decade old discontinued model and they only had 20 left 🤦.
Thanks!
No problem
Huh... well that's cool! When I was a kid I worked a stint at Benny's changing tires and I replaced lots of them but never like that!
I thought it was pretty cool as well. I guess it’s been available for a long time
Good info
Glad it was helpful!
MERCI POUR LE TUTO
No pr
Thanks
No problem
Yea anytime Your video was great
Thx
I recently had a leaking valve stem. Called the tow truck and arranged time at the tire shop. But the tow guy could fix the valve on the spot almost like you did - but instead of pulling the old stem out, he broke it off and pushed the rest of the stem inside the tire. The rest was like you did it. So now I have half of a stem rolling around inside my tire... but it doesn't seem to do any harm...
Nice. Better to take out but job is done.
גאוני -BRILLIANT
Thanks
Nice to know
Thx
Ty.. I have a 2003 gm..
Glad it helped!!
What lubricant should I buy? Do I need to wire brush any corrosion? I wonder 💭 will it leak any sooner then normal ?
I used silicone spray. You can use dielectric grease too. Wire brush would depend on your wheels finish. You don't wanna destroy paint or aluminum, wheels!
Ha ha K-Y jelly might be the ticket.
Can you do a video on removing the pull out ashtray?
Pull out ashtray. (Not all the way) Remove (2) 7mm screws in the black chassis. Then under the ashtray you’ll find another 7mm screw in center. Remove. Slide ashtray out a ONE UNIT. Never try and remove the ashtray without the metal chassis. There are some harnesses to unplug.
@@BroncosandPartsGarage Thank you, saved me a lot of time!
After reading the comments you are all forgetting this tool is for when you are in the bush and can't find a tyre fitment shop to replace the valve stem. Also it for emergency use when you are out far in the bush and haven't got a way to get to a town to get a tyre fixed. Is it not better to have peace of mind knowing you can at least fix a broken valve stem if you need to? It is the same as having a puncture repair kit in your vehicle only it is for valve stems.
Bingo
Think I would be able to do this without removing the wheel from a camper trailer?
Yes. As long as the stem is “flush” on the wheel.
That was like 269 seconds pretty close to the 10 seconds you told us in the beginning lol 😅
Thanks for watching the video. The entire process to 269 seconds, but the process of leveraging, the valve stem out of the wheel with the Tool took about 10 seconds. 💥
Ok what's that hook tool called and the other one and where can I get it from?
Click on title of video. Link for amazon
Anyone tried this with the HIGH PRESSURE rubber valve stems used on light trucks? I'm guessing the hight pressure variant of stem would not insert. Would appreciate any working knowledge.
These were on F150 wheels.
i hope i can do this with the wheel still on the car... i got new tires and didn’t know they apparently wheel locked EVERY lug nut or something. like 3 different ppl tried to use the key and cracked it. now one of my tires is flat and won’t take air. 😩
th-cam.com/video/riN32Xsmm6Q/w-d-xo.htmlsi=YndEWU1bUzGcEal_
I could be simpler still with a tire that doesn’t require balancing. Simply cut the valve stem flush with the wheel and push what’s left inside the wheel. Then proceed with the tool and cone as in the video. The little knub of the stem floating around inside the tire won’t hurt a thing.
Many ways. This one’s pretty cool.
Is this a temporary fix or is this the same type of valve stem that a tire store would install?
Its the same that a tire store would install. they're relatively cheap, just make sure you get the right 'size', it should say on your old stem. easiest way to tell
Well said. And true
Tire store quality.
Awesome! Thanks guys! I’ll forever be keeping this repair kit in my tool box.
If the pulling tool is junk a brake spring tool will do the same thing and it's much sturdier.
Except….. it’s a great trail tool.
Hell Yeah
Thx
Given how it works, I feel like you could just yank it out with some pliers though, right?
There is a tool for everything and this one does it perfectly
@@BroncosandPartsGarage for sure, I'm just wondering if you feel that this is necessary
2011 Hyundai Tucson has TMPS sensors. Can I remove sensors out and would this or other normal valve stem would fit?
Unless anyone knows the battery size on the TPMS, then I can change it.
Don't have suv yet & just helping a friend out.
Sensors need tire removed from bead
@@BroncosandPartsGarage No, not really. The tire doesn't really need to be removed out of the wheel.
My question pertain to the normal valve stem to be installed onto the wheel & not using the TPMS sensor.
Your tpms light will be permantly on if u remove a tpms sensor.
Other than that ur good to go
@@lostgary0 The TPMS indicator light is burnt out🙂 Gaskets/O Rings worn/cracked & dead batteries.
Not really good to go until they need wheel balances. Remember TMPS has some weights vs just V Stems.
@@angelisone ya and and u would need wheel balanced after taking tpms sensor out what’s ur point ??
I’ve done it in multiple vehicles
looks like one could easily save $40 and rig it up yourself with a plastic funnel (the long skinny ones) and a thread on valve puller tool. - might need to weld or glue the pivot so it stays straight. This tool kit should really be only $10-15 given the super basic cheapness of it
Those pullers ALWAYS rip the valve stem in half. Lol. But have at it. It’s a great kit
Just take a spoke from a bicycle to remake the puller.
I always carry bike spokes in my truck!! 😉
This is actually the valve, the valve stem is part of the valve
Yawn…
probably won't work with the thicker valves, the ones that go on winter rims
can only try!
good tool but guys in florida change them for $10
Not on the trail though 😉
I would not be using spray lube on any truck or trailer tire stem aired up to 65 psi...
These were OBS ford wheels and tires. 35-40 psi. Always follow manufacturers recommendations. I’ve never seen a valve stem “shoot out” of a rim in 52 years…. Always a first I guess
This is actually just the valve, the valve stem is part of the valve.
Yawn
Tool over $30 that breaks after two uses. Tire shop can just do it for me for less than that
Not out on the trails you can’t. 😉
Or you can always just come on down and I got ya
Think out in the trails….
Why not break the bead on one side, stand on the sidewall.
Cut the old stem off from the back. Pop the new one through.
Done and inflating in under a minute.
Lol. Thanks man. That made me laugh. Out on a trail, breading a bead by? Standing on a tire? If you can do it in under a minute I’ll eat my iPhone.
Yep, take the wheel off, break the bead, remove the old valve, install the new valve, put the wheel back on.
All done in one minute.
Sorry..."under a minute."
I agree, that's a lot better way.🤪
I'll look out for your video.
Ya lost me at $32 tool.. lol
$10 to have a shop replace the valve stem.
Your missing the point here 😃 Good luck finding a shop out on the trail. Or traveling to tire store and waiting 1-2hrs.
Hah, where can you get a shop to replace a valve stem for $10?! I want to go to such a shop! In new england they charge at least $30 - if they deign to do it at all!
For $32 just break the bead
Out in the field???
Don’t Forget To Subscribe For More Content !!
Ok why does this title say without removing the tire yet the tire is removed already?
Demonstration purposes only. Changed nothing regarding the use. Thx for watching.
how can they charge 32$ for this? seriously..... it's a hook and a plastic funnel.
Out on a trail….. it’s priceless.
Just push that thing inside with a screwdriver man it's rubber
Right way vs wrong way! Perfect trail tool
I could have had the shop do it for $5. Just saying....
A shop out on the trails? Or on vacation somewhere? Hmmmm
Too many special tools. Couldn't really see
Lol. Only two tools. Thx
$38 same shit as the shop, might as well take it to the shop🫠
On a trail…. No shops around
@@BroncosandPartsGarage in your scenario you aren’t in a trail you’re in a garage🤷🏽
you can use it for years
@@anthonysalonek9462 same with the shop