I’d have to disagree. He conflates the flange with the toilet and not only doesn’t consider what he’s doing by restricting but making fun of it. Must have them Oprah turds. The best toilet? It’s got a flat spot to catch/make a shit ring - I fell for it too. I was always a Toto lover, kinda like the Apple lovers. I went with American Standard on the kids toilet and it doesn’t clog unless they put massive paper!!
It sounds like a joke to me boy. What aren’t you in to satire? The only criticism I have is your indecisiveness to understand a joke! 😂 ya know I’m playing with you . . . . . . . BOY!
When you have an open toilet drain pipe, I suggest putting a heavy rag in it or other type cover while working around it to catch any wayward tools, bolts or any other accidently dropped stuff. Hey boy, stuff happens.
@@veeko616 Hahaa, $586.23, I custom built it. Ordered the bowl, tank, guts, handle and didn’t notice until I was putting the flange nuts on and went to stand up. I literally just packed it up about an hour ago for the new house. Lifetime crapper though and that was the goal. 💩 👍
Agree, I have one, is impossible to clog. I've been clog free for 3 years. No one, friends or family has been able to clog it. I was worried at first with it being low flow but no issues at all and love it❤
One of the first things I did when I bought my house was to replace every toilet with Toto Drakes. Went from clogs every week to virtually no clogs ever. A few times when the kids used baseball mitts worth of TP, we've thrown some dish soap in and let it sit before flushing again. That usually does it. Kids. But seriously Toto Drakes ROCK!
You rock dude! I used to be maintenance man " back in the day" I was replacing bathroom floors in bathrooms and removed/ installed 50 toilets one year. Circa 1991 I was using bread to stop leaks so I could SOLDER with FIRE a new valve. Learned on the very first one to Remove the valve guts before heat. Bread worked. It stopped the dribble.Sealing the base of the toilet is an art. These products make art achieveable.
Here's a tip on your smelly silicone. Silicone that smells like vinegar is an Acetic curing silicone. Another kind of silicone that doesn't give off much of a smell is an Organotin type of Silicone like GE II. Both are 100% silicone but one just smells a lot worse than the other one. Stop using the one that smells like vinegar.
I have installed a total of five Toto Drake toilets in two of my private homes. They are the absolute best and well worth it. Never had one clog or even slow down - an incredible design.
buy type 2 silicone its non voc and doesn't have the vinegar smell, the tubes look almost exactly the same, but they'll say type 1, or type 2 somewhere on the tube
Vinegar is barely considered a VOC. Most people are referring to automotive paints, primers or clear coat when they refer to VOC. Or specific chemicals used to thin, dissolve, or slow the curing time of a catalytic reaction. Xylene, Toluene, etc. If someone can't stand the smell of vinegar for a couple days, I think that's not worth addressing.
@@tcolondovich2996 glue is what I think of when I hear VOC, specifically cyanoacrylate, but probably because that's one of the few I can actually smell
If they still made Universal Rundle commodes, it'd put that Toto to shame ; but unfortunately they got bought out, made some badass valve assemblies too @replumb ,,, possibly some content appropriate old timer content for you there. I've been in the plumbing industry all my life. Keep it homie you do good work
Thats how you know you're a good contractor. When you find a random Bucket in the back of your van and it ends up being pretty useful. Lol Great Video! 🤣👍
Bro, you have the best plumbing channel hands down. I hope one day when the times is right for you, that you go out and open your own company cuz you really got a great head on your shoulders and you do great work. Your use of social media alone is fantastic advertising and would bring in work. keep kicking ass my guy
I use a washer with a nut with round side pointing down on the toilet flange. Above the porcelain bowl base I use two metal washers with plastic trim washer between them and the round side of the nut pointing up.
I'm a plumber in Colorado. I love your vids. Been watching them since last week. I use knipex and milwaukee almost exclusively as well. You know your shit buddy. Plumbers gonna plumb. Keep making these videos please.
Have you used the wax less seals, I love them they cost a bit more but makes foolproof. And if something happens while you're installing, you can take it up and reuse it. Great job, personally I like Kohler Cimarron Elongated only. Thats a excellent toilet. A bit noisy though.
I was out camping with my kids for cub scouts. Pulled out our mess kits for camp lunch. And boom…found out where the little bucket you have is from. It’s a Walmart brand camp utensil kit. Comes with two of everything, plate, fork, spoon, knife, and this bowl cup thing and all in a mesh bag. Izaak trail brand I believe. Haha cheers
No, the vinegar smell is from RTV silicone which has an acetic acid cure. There are other cure types that don't smell, but the acetic acid one is pretty common.
Toto toilets are great if you want a toilet that has a powerful flush and can last the life of the house. American Standard Vormax toilets are amazing too.
@@Bigtexbbq That's what I'm wondering. My mobile home has the same toilets and it's 25yrs old. Only thing we've ever had to do is change the internals in the back of the tank maybe twice and that was only because the flapper wasn't sealing correctly. We could've just bought a $5 flapper but just went ahead and replaced it all. 🤷🏻♂️
The last Toto I bought had a weak flush...I've set 1,000's of toilets in tract homes. Toto gave me a hard time replacing it...they finally did. Western Pottery makes a great 1.2 gal., comfort height, elongated that flushes great. I shim 99.9% of my sets before tightening the closet bolts.
We had our bathroom completely renovated and expanded. I love it. A huge shower with a built in bench. The best part is the new toilet. I got the tallest one available and the best part is the super fancy bidet installed on it. It looks like the controls for a space shuttle. I can’t believe I didn’t get this sooner. Hygiene is so critical and this makes it perfect. You can control every aspect to the smallest degree. People laugh but once you’ve had one, you would not go back.
I've had a bidet toilet seat installed on mine for several years now, one of the best upgrades ever. Mine heats the water, heats the seat also - a great thing during the colder months.
I hate it when people say they're OCD about something completely reasonable. How dare he say he wants it waterproofed. That's not OCD that's just using your brain
It’s already waterproof and gas tight with the gasket and the wax ring… adding silicone doesn’t waterproof it anymore than it already is… hence the overboard “ocd” method of adding additional waterproofing
couple years ago when i bought my first house i actually learned about how good the Toto Drake is. I was gonna immediately replace both of mine with drakes. Then i realized the price.... and multiplied by two.. and i'm perfectly happy with what i've got! one day though!
I bought Drake as I could NOT fix a leaky flapper on a lowboy Eljer. It could not be fixed. I had two and have replaced everything several times but they still trickle until I took your advice and set a Drake and yes, it flushes very well! Agreed, they are great!
Got two of these toilets in my house. The only issue I have is that you have to be careful what solution you use when cleaning them, the classic ones will destroy the non-stick coating.
I had a renter for 16 years and he left the place in horrible condition. I called a Plummer who charged me $80 to jingle the handle and tell me I need a new toilet. The toilet was ENCASED. I drained it with a hand pump made for kerosene. I covered it with a trash bag and pulled it out into the yard. Then, I set my first toilet! Oatey spacers saved me. Thanks to Oatey and thanks for your videos.
In Massachusetts it's against code to caulk the bottom of the toilet. The theory is if it leaks you will see the water on the bottom of the toilet on the the tiles.
@@suburbangardenpermaculture3117 I guess it depends on if you have time 😅. Sorry about what man, hopefully you got video about it. I hear Afroman can make an awesome music video about it🤣🤣
I own a Toto Drake and I can vouch it is the best toilet I've ever used. I cannot remember it clogging ever. I also paired it with a Toto Washlet bidet. Pure heavenly toilet bliss
I agree I’ve sold hundreds of drakes in Birmingham upgraded from standard toilets Great flushing toilets What I would put in my home as well. Not cheap but worth the money
Dude I love that little can. I personally prefer to use repair flanges that have a gasket but it's only cause I'm paranoid I'm prertt sure that oatey one will work just fine. I think oatey makes one where u can use Allen keys to tighten the gasket so it will lock itself into the pipe I like those too cause it's anchoring the flange to the pipe and the floor. Again could be overkill but ik a parajoid guy.
Dude I felt that toilet seat problem 😅 my supply house always gives me commercial no - lid seats, which is quite annoying because we only do resedential.
The Drake is great toilet. Just installed a Toto Neorest 700H toilet in Newport coast. 💰 Had no idea that it cost $10,000. 🤔🤷 until the customer told me the cost of it. Crazy stuff man. Had as much circuitry on that toilet that the FAU’s I install. Wild!! For something that you 💩in. It also had that terrible Toto trap way thing that to me is ridiculous. To me you can’t go wrong with your old fashion flapper style toilet.
I got the Toto drake not really knowing any better but just wanted a good platform for my bidet. It is a mighty good flusher, however I can confidently say I have clogged her a few times.
No apology necessary. 😂 Gotta do what you gotta do. When I install flooring around a flange, i make sure to leave a slot for the toilet bolts so you guys dont have to chip/cut it out, But not everyone is as considerate.
There’s a little plastic lip on the underside of the yellow flange you’re supposed to remove if you don’t use a red spacer that’s at least 1/4”. I believe in that case, you’re also supposed to use a wax rim underneath the yellow flange (then another on top when you set the toilet). Per manufacturer instructions.
@@replumb if you don’t use a red spacer, the instructions say you “MUST” (written in caps) remove the lip AND use a wax rim under the flange. Read the instructions before installing to prevent issues down the road.
be honest Mr plumba that little red bucket was one of your childhood favs when you were playing redhood going deep, deep into the woods to you harvest strawberries 😅
Dude these impressions and rebuttals are just getting better and better😂
Subscribed just for the personality fuck the rest of this shit
Can you please just slow the app , I'm a female and like to work on My own plumbing
I’d have to disagree.
He conflates the flange with the toilet and not only doesn’t consider what he’s doing by restricting but making fun of it. Must have them Oprah turds.
The best toilet? It’s got a flat spot to catch/make a shit ring - I fell for it too. I was always a Toto lover, kinda like the Apple lovers.
I went with American Standard on the kids toilet and it doesn’t clog unless they put massive paper!!
@@Apex8r I can hear your voice
@@Apex8r American Standard Cadet III is actually the best flushing toilet ever made!
Toto Drake is one solid toilet, installed hundreds of them for years for customers and put them in my own homes. Glad to hear others out there know 👍
Hey boy, in my day, we never showed up with the wrong toilet seat.
Idk if this is a joke or an actual criticism 😂
It sounds like a joke to me boy. What aren’t you in to satire?
The only criticism I have is your indecisiveness to understand a joke!
😂 ya know I’m playing with you . . . . . . .
BOY!
Ok
When your supply house sells the seat separately.. lol 😂
I’ve had a hole in the porcelain of a drake II leak and they sent a replacement tank from a normal Toto drake.
That was a long toilet install.
I love that TH-cam provides a healthy outlet for your many personalities to flourish!
Yes, that was the thought I had too - never had an interest in plumbing but I subscribed instantly because of how hilarious he is
“If you can clog up a Toto drake I think you have some kind of medical condition” LOL 😂
That’s classic!
Best Comeback ever 😂
Herpes😂🎉
Sepsis😂🎉
UC, IB or diverticulitis all three....
When you have an open toilet drain pipe, I suggest putting a heavy rag in it or other type cover while working around it to catch any wayward tools, bolts or any other accidently dropped stuff. Hey boy, stuff happens.
Toto has never failed me but the last one I bought had a crooked logo and it’s been irritating me for the past 7 years. Cool bucket, gotta get one. 👍
Hey fellow OCD sufferer, I too would be shook for years if I saw a crooked logo.🤬🤬I feel ya brother.😂😂
Looks like a dog travel bowl
@@veeko616 Hahaa, $586.23, I custom built it. Ordered the bowl, tank, guts, handle and didn’t notice until I was putting the flange nuts on and went to stand up. I literally just packed it up about an hour ago for the new house. Lifetime crapper though and that was the goal. 💩 👍
That would also irritate the hell out of me. I would probably get some acetone and rub the logo off
It’s a packable cup for camping
Agree, I have one, is impossible to clog. I've been clog free for 3 years. No one, friends or family has been able to clog it. I was worried at first with it being low flow but no issues at all and love it❤
Hearing the words "Hey boy" always gets me 😂
I Guarantee I can clog a drake lol we had to get a dual flush toilet with a built in grinder before my logs would flush.
One of the first things I did when I bought my house was to replace every toilet with Toto Drakes.
Went from clogs every week to virtually no clogs ever. A few times when the kids used baseball mitts worth of TP, we've thrown some dish soap in and let it sit before flushing again. That usually does it. Kids.
But seriously Toto Drakes ROCK!
One of my favorite plumbing channels!
You rock dude! I used to be maintenance man " back in the day" I was replacing bathroom floors in bathrooms and removed/ installed 50 toilets one year. Circa 1991 I was using bread to stop leaks so I could SOLDER with FIRE a new valve. Learned on the very first one to Remove the valve guts before heat. Bread worked. It stopped the dribble.Sealing the base of the toilet is an art. These products make art achieveable.
Here's a tip on your smelly silicone. Silicone that smells like vinegar is an Acetic curing silicone. Another kind of silicone that doesn't give off much of a smell is an Organotin type of Silicone like GE II. Both are 100% silicone but one just smells a lot worse than the other one. Stop using the one that smells like vinegar.
It never ceases to amaze me how many small details and things you can learn as a tradesmen
Well if there are two different types what exactly is the vinegar one designed for compared to the other one that doesn't smell?
@@AustinMichael vinegar one is original, one without smell was designed to do the same job without the smell of the original.
@@Kaptiv239 Interesting. Why is it that they still make the smelly one then? Is it cheaper?
@@AustinMichaelalmost certain it's because it's cheaper.
I usually use s second wax ring just to smash into the gap around the flange when I do upstairs toilets to seal, just an option from the silicone 🤙👍
Medical condition indeed 😂 definitely a handy Lil bucket. Like it 👍
I have installed a total of five Toto Drake toilets in two of my private homes. They are the absolute best and well worth it. Never had one clog or even slow down - an incredible design.
buy type 2 silicone its non voc and doesn't have the vinegar smell, the tubes look almost exactly the same, but they'll say type 1, or type 2 somewhere on the tube
Vinegar is barely considered a VOC. Most people are referring to automotive paints, primers or clear coat when they refer to VOC. Or specific chemicals used to thin, dissolve, or slow the curing time of a catalytic reaction. Xylene, Toluene, etc.
If someone can't stand the smell of vinegar for a couple days, I think that's not worth addressing.
@@tcolondovich2996 glue is what I think of when I hear VOC, specifically cyanoacrylate, but probably because that's one of the few I can actually smell
If they still made Universal Rundle commodes, it'd put that Toto to shame ; but unfortunately they got bought out, made some badass valve assemblies too
@replumb ,,, possibly some content appropriate old timer content for you there. I've been in the plumbing industry all my life. Keep it homie you do good work
You got me to buy the Knipex bolt cutter. I went with the 10", no mess cutting bolts!
Thats how you know you're a good contractor. When you find a random Bucket in the back of your van and it ends up being pretty useful. Lol
Great Video! 🤣👍
Bro, you have the best plumbing channel hands down. I hope one day when the times is right for you, that you go out and open your own company cuz you really got a great head on your shoulders and you do great work. Your use of social media alone is fantastic advertising and would bring in work. keep kicking ass my guy
TH-cam put a review on your comment asking me to rate it so I gave you top scores, keep being awesome and keep encouraging people 🙏
I use a washer with a nut with round side pointing down on the toilet flange. Above the porcelain bowl base I use two metal washers with plastic trim washer between them and the round side of the nut pointing up.
dont worry, keep moving forward, tanks for sharing...
I'm a plumber in Colorado. I love your vids. Been watching them since last week. I use knipex and milwaukee almost exclusively as well. You know your shit buddy. Plumbers gonna plumb. Keep making these videos please.
Thanks for watching man!
You couldnt pay me enough to deal w peoples shit. 😂
Here in Denver plumbers put a LOT of dope in their joints.
Have you used the wax less seals, I love them they cost a bit more but makes foolproof. And if something happens while you're installing, you can take it up and reuse it.
Great job, personally I like Kohler Cimarron Elongated only. Thats a excellent toilet. A bit noisy though.
Which waxless seal do you like best?
Those waxless seals are the best, I'll never go back to wax.
Man that bucket does look handy I think it’s a portable dog bowl.
Its a children's beach toy
Sold in Walmart as a pet bowl
Or a planter but those usually have holes
its a camping cup
I was out camping with my kids for cub scouts. Pulled out our mess kits for camp lunch. And boom…found out where the little bucket you have is from. It’s a Walmart brand camp utensil kit. Comes with two of everything, plate, fork, spoon, knife, and this bowl cup thing and all in a mesh bag. Izaak trail brand I believe. Haha cheers
The vinegar smell is an additive. Its a mould inhibitor. 100 percent silicon is odourless
No, the vinegar smell is from RTV silicone which has an acetic acid cure. There are other cure types that don't smell, but the acetic acid one is pretty common.
@@Ariel1S good man, what does the RTV stand for?
@@tombradshaw2000. RTV is acronym for- room temperature vulcanized .
@@tombradshaw2000 Realistic Toy Vaginas or sometimes Reality Television
It's a cure retarder. So it cures evenly thru the whole bead
They do that installation expertly and make it look so easy.
Toto toilets are great if you want a toilet that has a powerful flush and can last the life of the house. American Standard Vormax toilets are amazing too.
VorMax has those 2 flapper valves...interesting, just wonder how that "see-saw" connecting mechanism holds up over time.
What would make a toilet not lifetime? Other than someone being so fat they break it I don’t understand how ceramic couldn’t last.
@@Bigtexbbq That's what I'm wondering. My mobile home has the same toilets and it's 25yrs old. Only thing we've ever had to do is change the internals in the back of the tank maybe twice and that was only because the flapper wasn't sealing correctly. We could've just bought a $5 flapper but just went ahead and replaced it all. 🤷🏻♂️
@@GrabLifeByDaPoosyA bunch of regulations makes them worse than modern.
I like the Kohler vacuum Rt toilet, the best!
Making it look like the smoothest process known to man.. good work
i did research that concluded with me installing that toilet in my bathroom. it will flush anything and no gross bowl rim. but it is a little loud.
The last Toto I bought had a weak flush...I've set 1,000's of toilets in tract homes. Toto gave me a hard time replacing it...they finally did. Western Pottery makes a great 1.2 gal., comfort height, elongated that flushes great. I shim 99.9% of my sets before tightening the closet bolts.
Great Job, the only other thing I would do is plug the drain so I wouldn't lose any tools or parts down the drain.
Can attest to accidentally dropping a flange bolt down and the. Losing a drain snake thinking I could get the bolt afterwards
My dad did that once...............only once. 😂😂
That red bucket is a treasure for sure ❤
That medical condition line had me lol
This video is so good for us for learning more
We had our bathroom completely renovated and expanded. I love it. A huge shower with a built in bench. The best part is the new toilet. I got the tallest one available and the best part is the super fancy bidet installed on it. It looks like the controls for a space shuttle. I can’t believe I didn’t get this sooner. Hygiene is so critical and this makes it perfect. You can control every aspect to the smallest degree. People laugh but once you’ve had one, you would not go back.
I've had a bidet toilet seat installed on mine for several years now, one of the best upgrades ever. Mine heats the water, heats the seat also - a great thing during the colder months.
I tell people if you're using only toilet paper you're just smearing it.
I bought a Toto toilet 8 years ago...best toilet ever.
I hate it when people say they're OCD about something completely reasonable. How dare he say he wants it waterproofed. That's not OCD that's just using your brain
It’s already waterproof and gas tight with the gasket and the wax ring… adding silicone doesn’t waterproof it anymore than it already is… hence the overboard “ocd” method of adding additional waterproofing
Also the 52 other people that liked your post don’t know shit about plumbing.
couple years ago when i bought my first house i actually learned about how good the Toto Drake is. I was gonna immediately replace both of mine with drakes. Then i realized the price.... and multiplied by two.. and i'm perfectly happy with what i've got! one day though!
Great idea for tile over tile floor where most use double wax rings
😅 this guy is awesome...love the videos w commentary
I use to do commerical plumbing. High-rises, condos, hospitals etc. I can honestly say You're the Truth!! A real Tradesmen. Skills!
Hate the round bowls,but TOTO is fabulous 👌
They make the Drake in Elongated as well. I would never buy a round toilet.
Just installed two of them for my parents. I wish I could have used a riser kit. The flanges on both were high, and I had to shim the fronts.
Man ur vids are the best made my day
😩hey”boy 💩😂😂😂 I love your videos🫡
I bought Drake as I could NOT fix a leaky flapper on a lowboy Eljer. It could not be fixed. I had two and have replaced everything several times but they still trickle until I took your advice and set a Drake and yes, it flushes very well! Agreed, they are great!
The company i work for only uses toto toilets. They are the best.
Yes, Flush power. Kohler is a close 2nd in flush power but much more stylish designs. Kohler is best to me by far. Totos look like army toilets.
Omg how you installed that angle stop was genius
These videos and voices are one of the best parts of my day 😂
You know what you're doing. Congrats brutha.
you make it look easy wiggling those ferrules off, i tried the other day and struggling for 10 minutes😂
Yeah let’s hear about this
It's the beauty of speeding up a video lol
Got two of these toilets in my house. The only issue I have is that you have to be careful what solution you use when cleaning them, the classic ones will destroy the non-stick coating.
I had a renter for 16 years and he left the place in horrible condition. I called a Plummer who charged me $80 to jingle the handle and tell me I need a new toilet. The toilet was ENCASED. I drained it with a hand pump made for kerosene. I covered it with a trash bag and pulled it out into the yard. Then, I set my first toilet! Oatey spacers saved me. Thanks to Oatey and thanks for your videos.
Thank you sir!
Unfortunately my only medical condition is being 6 and a half feet tall with tootsie rolls just as long.
You restrcting up that flanges size I could clog that up in a heart beat 😂😂 bust out laughing bro thank you
In Massachusetts it's against code to caulk the bottom of the toilet. The theory is if it leaks you will see the water on the bottom of the toilet on the the tiles.
Cool story
He didn't caulk the toilet, he caulked the flange, which can be caulked or grouted to prevent movement.
I was told not to caulk the back side👊
@@stevef.9659 you didn’t watch the entire video… he clearly used a white caulk to seal the gap on the toilet base.
In a lot of places its common to caulk the toilet and leave the back open . Best of both worlds
Flang extension. I might need to get one of those.
Home Depot has a 99 dollar toilet kit that will flush 1000grams and it is amazing.
That's the Malarkey Master Model 2
I........I..... I dont WANT to flush 1,000 grams, thats alotta coke, man!! Why the fk would i do that??
@@suburbangardenpermaculture3117 you do that when the cops are right outside your door with a warrant
@@masoquistaeo personal experience: no, they don't. When they have a warrent outside your door, they bust in your window and toss in a Flash Bang.
@@suburbangardenpermaculture3117 I guess it depends on if you have time 😅. Sorry about what man, hopefully you got video about it. I hear Afroman can make an awesome music video about it🤣🤣
you had me cracking up on clogging the toto drake lol 🤣
Not sure if this will pass inspection in Mongolia bud. Boy I’d redo this if I was you.
Bro you do great fucken job clean ass fuck love it
The last 5 seconds made me laugh so hard I subscribed. Thank you sir. I needed that
Sioux Chief Nylon T bolts are the best. Cut with a saw blade, leaves no rust stains & the flange or toilet will break before they will!
What is the grey colored tool he used in 0:37 to tighten that nut ? What is it called ? Thanks !
I own a Toto Drake and I can vouch it is the best toilet I've ever used. I cannot remember it clogging ever. I also paired it with a Toto Washlet bidet. Pure heavenly toilet bliss
It's fine
You do a nice job every time
Nice clean work. 👍👌👏
The little red folding bucket is what I need 😅👍🏽
These videos are very helpful!!
I love these videos
I love your content, well done
I agree
I’ve sold hundreds of drakes in Birmingham upgraded from standard toilets
Great flushing toilets
What I would put in my home as well.
Not cheap but worth the money
Dude I love that little can. I personally prefer to use repair flanges that have a gasket but it's only cause I'm paranoid I'm prertt sure that oatey one will work just fine. I think oatey makes one where u can use Allen keys to tighten the gasket so it will lock itself into the pipe I like those too cause it's anchoring the flange to the pipe and the floor. Again could be overkill but ik a parajoid guy.
I clogged a Toto Drake several times. One time a plunger wouldn’t even work we had to snake it. 😊
Dude I felt that toilet seat problem 😅 my supply house always gives me commercial no - lid seats, which is quite annoying because we only do resedential.
Thanks, now I'm doing it myself. might call you tomorrow for repairs
Thanks for the toilet advice
The Drake is great toilet. Just installed a Toto Neorest 700H toilet in Newport coast. 💰 Had no idea that it cost $10,000. 🤔🤷 until the customer told me the cost of it. Crazy stuff man. Had as much circuitry on that toilet that the FAU’s I install. Wild!! For something that you 💩in. It also had that terrible Toto trap way thing that to me is ridiculous. To me you can’t go wrong with your old fashion flapper style toilet.
I’m such a huge fan of yours, as a fellow young business owner I feel all of your pains. You do awesome work my friend way to be ❤🙏
👍💯❤️🔥🙂Good job Evan keep up the good work 😊
I learned in plumbing I turned those acorn nuts upside down to more center the the nut and stud.
😮❤❤❤❤❤👏👏👏👏👍😎✌🤟
Nice thanks man for sharing 👍 giving us some ideas 💡 😀 thank you man really appreciate it 👍
Phenomenal work brother man😮
that was so satisfying to watch
I missed this guy on my feed. Where have you
Been bro ?
Maybe you didn’t like one of my videos and the algorithm got messed up
I got the Toto drake not really knowing any better but just wanted a good platform for my bidet. It is a mighty good flusher, however I can confidently say I have clogged her a few times.
No apology necessary. 😂
Gotta do what you gotta do.
When I install flooring around a flange, i make sure to leave a slot for the toilet bolts so you guys dont have to chip/cut it out, But not everyone is as considerate.
Excellent job!
Great work bro, thanks for the content!
Suga Sean really does have every side hustle
I like the kholer 360 series also, which seems similar in how the flush works.
I took a Toto for a drive, very nice, great power, very comfortable.
There’s a little plastic lip on the underside of the yellow flange you’re supposed to remove if you don’t use a red spacer that’s at least 1/4”. I believe in that case, you’re also supposed to use a wax rim underneath the yellow flange (then another on top when you set the toilet). Per manufacturer instructions.
It comes with a gasket you can’t use instead
@@replumb if you don’t use a red spacer, the instructions say you “MUST” (written in caps) remove the lip AND use a wax rim under the flange. Read the instructions before installing to prevent issues down the road.
The impressions fucking SEND me🤣🤣🤣🤣🤣🤣🤣🤣
The little bucket is a collapsible cup from an ozark trail camping mess kit
HAHA replumb messed up gotta go to Home Depot 😂 love the channel
be honest Mr plumba that little red bucket was one of your childhood favs when you were playing redhood going deep, deep into the woods to you harvest strawberries 😅