Separator MTRC - Training and Explanation Video

Are you interested in becoming a licensed Bühler reseller? Visit bit.ly/bühler_resales to learn more. Head over to www.buhlergroup.com/trainingce... to discover all our milling training courses.

[@sanjaysharma276]

Good

[@maryannngugi3695]

Do you still need a destoner when you have this separator/classifier?

[@BuhlerGroup]

Yes, because the separator separates the grain by sorting out coarse material from fine particles. Sand and seeds are intensively removed in the coarse sand sieving area while the destoner ensures maximum removal of impurities with a higher specific weight such as stones and glass. It also classifies the grain into high-density and heavy fractions. Please let us know if we can further assist you.

[@KazanSkyrim]

Separator separates material by using perforated sheets and gravity. Every level has own its sheet with different holes' size. Than lower level, than smaller the holes.
So there is only separating by size.
Destoner use additionly fan on its top, that air flow can go through perforated sheets and lift ligther particles above heavier. And havier particles go backward to the top of perforated sheet, where they quit as waste.
Also the lighthest particles fly away in fan on top, so you should install filter or air-recirculating system to prevent air pollution in work area (or just put vent tube outside of factory if local laws permit this behavior).
There is separating not only by size, but by weight too.
Separating end product by weight and size in different containers will increase price of machine.
And a distoner are little more expensive, than just a separator.

[@diegomiguelvalles1279]

Hello! I would to know the power per hour of the three model of the Separator MTRC, please. Thanks!

[@BuhlerGroup]

Dear Diego
We just spoke to the technical responsible of our MTRC separators and he provided the following information about the different MTRC models and motors: MTRC-100/100 & MTRC-100/200 have got each two 0.3kW vibromotors at 50 Hz as well as 2x 0.35kW at 60Hz.
MTRC-150/200 has got two 0.65kW motors at 50 Hz as well as 0.65 kW at 60 Hz.
We hope we could answer your question.
Best regards, Bühler Social Media Team

[@diegomiguelvalles1279]

@@BuhlerGroup Thank you very much for the information and your kindness.

[@BuhlerGroup]

You're welcome!

[@ramkrishna2651]

We need vibro grader for green cardamom. We want go grade cardamom according to size of the pod. Which machine is suitable for this application. Have you supplied cardamom grader to anyone in india?

[@BuhlerGroup]

Dear ramkrishna2651, Thank you for your interest in our company. We are a Swiss-based machine solutions provider and have offices and production sites all across the globe. Our main areas for our solutions are Food, Animal Feed, and Advanced Materials (e. g. battery components, Die Casting). Feel free to browse through our website below to learn all about us.
Best regards, Bühler Social Media Team
www.buhlergroup.com/content/buhlergroup/global/en/homepage.html

[@nikhilchavhan2441]

What is MTRC Full From ?

[@BuhlerGroup]

Dear Sir,
Thank you for your interest in our company. Unfortunately I do not understand your question. Could you please specify which product you're interested in and provide us your e-mail address and phone number? We will then be happy to put you in touch directly with the corresponding expert.
Best regards, Bühler Social Media Team

[@ankurvyas8887]

Send to price

[@shipaljainmahaveerricemil7653]

Machine ka catalogue bhej sakte hain kya

[@BuhlerGroup]

Dear Shipal
Thank you for your interest. Please contact our milling experts directly via e-mail at [e-mail]. They will be happy to send you more information.
Best regards,
Bühler Social Media Team

[@atcfoodproducts6019]

we want vibro for all pulses and grains

[@BuhlerGroup]

Thank you for your interest.
You can directly contact us at [e-mail]
They will be happy to assist you.
Best reagrds.
Bühler Social Media Team

[@MRMGAMER35OFFICIAL]

All details
Capacity & price send me

[@BuhlerGroup]

Dear Rihan
Thank you for your interest in our company. Please fill in the following form (see link below), which will allow you to be connected to the appropriate sales expert directly. They will get back to you as soon as possible.
Best regards, Bühler Social Media Team
www.buhlergroup.com/socialcontact

[@kiritgala7393]

Pls send me price list

[@BuhlerGroup]

Thank you for your interest. Please either give us your e-mail address or contact our milling experts directly via e-mail to [e-mail]

[@NEWMILLMChJ]

Donni tozalashni mukammal echimi

[@BuhlerGroup]

Thank you :)

[@soon1748]

Qui s'appelle ce machine en français

[@BuhlerGroup]

Dear user,
Thank you for your inquiry. Please use the form within the link below to send it again and this will connect you directly to a corresponding product expert. Remember to fill in all fields and select the industry (e.g. Rice and Paddy, Confectionery and Snacks) to which your inquiry pertains.
Best regards, Bühler Social Media Team
www.buhlergroup.com/socialcontact

[@santoshbhosle8567]

Setig.wadreshen