Cheap to Charming - 90 Minute Gun Improvement Challenge
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2022
- Cheap to Charming is Back! The show where we take a cheap gun and try to make it as good as it can be has returned for 2022, this time with a 90 minute time limit for the work on each episode
To get a ShotKam in the Fathers Day sale: bit.ly/TGSOutdoors-ShotKam
Part One sees us try and tackle the basics of gun fit in under 90 mins, and try to get this gun pointing where i am looking, and more comfortable to shoot.
Enjoy
To Become a Channel Member and give us your support:
/ @tgsoutdoors
Subscribe & hit the alarm bell for plenty more where this came from!
Podcast: open.spotify.com/show/7EYQ5dN...
Instagram: / tgs.outdoors
Facebook: / thegunshopbotley
Find Jonny on Instagram - / jonny.carter.shooting - กีฬา
Love it, as an occasional gun restorer you made me extremely thankful for my fully equipped woodworking shop!!!
Glad you kept the firedoor clear 🤣
Would love to see it after a few more hours
Though I don't especially like the checkering pattern, it was otherwise a very nice gun to begin with. I would have been happy to have owned it.
Even Jonny has to have his tea break on his own time, harsh task master🤣🤣🤣
Yes! missed this series!
@tgsoutdoors I would love a video on options to adjust older guns. I own a few Japanese O/Us but I’m 6’4”. I’d like to lengthen the stock either in a removable fashion so it can go back to original or in a nice way i.e pad options or a wood extension. Love your attitude on using and enjoying the not as mainstream guns, they are beautiful in their own way.
Good work in 90 mins! Be great to see follow up with more tweaks!
Great video. I really enjoy the cheap to cheerful series.
Perhaps you could, in the future, do a full restoration on this Betty?
It would be fun, and an insane prospect!
Nice job. well done! for the timing allowed that's an achievement.
Yet again a very entertaining video Jonny (and Sash). You have given me the inspiration to mess around with an old Webley 410 bolt action where I have refinished the stock totally and polished a few bits and fitted a rubber recoil to extend it somewhat., Still has patina but looks 100% better and have had a few positive comments. Keep up the fantastic work and hope to meet you in person at some point. Well done.
You'll be loading your own cartridges for that soon , you wont get 2.5 inch .410 cartridges in steel 🤨
Really enjoying this channel. Keep it up 😆
Loved it would like to see how nice it could be !! , Looked good on film
Fire it! You fire a gun!
One heck of a job in a small timeframe. If I ever have any stock work done and it takes longer than 1-1/2hrs I'll show them this vid and get some discount!!! Cracking job JC
Not sure you’d want it to this standard
@@tgsoutdoors 🤣🤣🤣
Its good to see the cheap to charming again.
JC, get yourself a farrier rasp, Heller makes a nice one. Just watching at the 12:17 mark and noticed that you are using a much smaller rasp. They are wonderful for heavy stock removal and leave a fine finish to boot, and have a coarse/fine side. I make infill planes, and use these farrier rasps all the time to shape ironwood, walnut, and "shatter" happy woods. they are very gentle, highly recommend. Unsolicited advice from a stranger...
Really entertaining video 👍
I think you should thin out the grip cap into a nice white stripe and put on some ebony (or something black) to match the recoil pad. And then do the comb work you want, I'd love to see what all you could come up with at the end.
Did the same thing with a 1960's under and over twin triggers Baikal though taking more time over its remodelling. It now keeps people guessing on what make it is.
I feel better now... my workshop is a bit shambolic too! Incredible job in 90mins...well done you.... I think you overdid the grip cap by quite a lot.
Tidy up the wood some more, get it to fit you a wee bit better and re-finish those barrels..... tripled its value at least.... 🙂
The pistol grip extension looks like a Cuban heel. Top laugh.
So good😂😂😂
Good video pal. I’d like to see what you could do with a full day. Let’s see what you could possibly transform with a low budget, low cost o/u multi choke gun to try and lift it up to more of a match spec gun in a full working day.
Gunsmithing video but with your brands unique filmography? We need more of this please? Even if it’s a higher end £1000-2000 gun tarting up. What could you do with an old silver pigeon in a 4 parter, where you actually spend a day on a gun rather than rush?
Lovely video, really enjoyed as always!
Hi Jonny, great video! what are the LS hats you’re wearing?
Lovely kiddo
You succeeded in making a pig's ear out of the stock! Great video!
Under £100? I'd drop three Benjamins on that gun any day of the week. Neat action; lacking the side lugs of an SKB, so not quite as nice as one of those, but still a nice poor boy's Merkel. Definitely more interesting to look at than another Rizzini/Brescia knock-off.
Given you put that big black extension in there, I would've stuck with black for the grip extension, too.
Looking forward to a follow up on what you do with the comb. Maybe you'll like the end product enough to keep it around for rainy day shoots.
One good thing about the UK, shotguns of any shape or size that you want can be had for scrap price
As charming as a pavement pizza at midnight lol
Superglue is for wounds!
Was that gun in the last Holts auction? I did see one in amongst the cheaper guns for not much. I'd have bought it if I lived in the UK
I like this. Is it possible for you to use and include some shotkam footage in these?
We usually do, but had filled the card up doing other films you will have seen on both days!
@@tgsoutdoors Have you ever thought to use 2? One on your gun and another on your coaches while you shoot the same 10 clay stand? Use the long record option so that you can check up on your hold point and consistency, comparing how you do this to your coach? A nightmare I know, but you would probably be up for it. Also ... have you ever considered getting a forward camera (smart phone ) facing backwards filming how you mount the gun at the same time? Shotkam is GREAT but shooting is about more than lead, and the Proofhouse team look to have the video excellence to show this. Of course, the answer to this is probably no, no and HELL NO, but what the heck, I thought to share a concept and ask a question.
Loving your videos, and this one has inspired me to consider setting up my own workshop, thanks for that (I think)
I had a bettinsoli back in the 80's it beat me up every time I used it due to poor fit. The gun was strong but it had to go, if it had fit better I'd probably still have it now.
Did you get that in the last Holt's auction? Saw one in the catalogue
Are the Zoli shotguns an off-shoot of this old gun. The name sure rang with it!
What recoil pad was that? I’m in need of a extension like that
Loved this… on a serious note though, could you do show us how to upgrade our guns please.. such as the mk38?? To make them shoot better/feel better?? Thanks again
Some Teague Titaniums in the end and go and shoot!
@@tgsoutdoors it’s already got Teague chokes.. come on, don’t tease there’s got to be more lol 😂
Balance it slightly front heavy.
Send it to longthorne and see what they can do with it!!
Sadly the cap doesn’t look good at all.
Used to use a true oil finish on mine, but you get a build up eventually, and the shiny craggy finish lost me after a while.
Strip the wood with thinners, steel wool the stock and applied 2 coats each 24 hours apart of Matt finish oil for floorboards that I got from a flooring friend….( ridiculously expensive stuff but free for me ) delicious.
Matt finish that enhances the grain.
Given how the stock looks with the extension and the cap, it’s obviously more functional…. But new custom stock would certainly look better.
My friend Steve Middleditch an Englishman and shooting instructor in Florida now did something like this to a B25 Browning D5.Steve is not really a gunsmith as such.Certainly not back then.Not sure if the gun shot any better for him.😈He did have all the tools though including a lock Knife 🙃
I think you should paint over that fire door sign or move the bench.
I'd still trade my crappy X-9 Sporting any day of the week for this charming project 😅
It looks super 70s with that grip extension. I didn’t realize you still did gun work.
Snazzy Proofhouse cap! Are they available to buy?
They will be soon
Ah, cheap to charming; l missed these. Was worried yur maun had forgotten how to 'smith ;D
By the state of this gun - I have forgotten how to do it quickly!
@@tgsoutdoors To be fair, given this was only 90 minutes you did an excellent job. A series of 90 minute quick improvements to this same gun would be really good. Different jobs, though mind; can't go back to a previous task :D
@@johngregory8576 That might already the plan, depending on how this performed - you last words are a hell of an idea, although i'm sure it will add stress to my life!
I started with a late eighties Bettisolli 12ga non ejector and it was good enough, it went bang and hit things.
Really enjoy these cheap to charming videos.
👍🏻
What's the name of the channel that reviews bettinsolis? lol
#italiansbestkeptsecret
This has nothing to do with what I just watched. But just an idea would it be possible to do a test on shotgun barrel length and velocity? Maybe compare the shortest legal barrel length a 24 inch barrels velocity to let's say a 34 inch barrels velocity. Obviously using the same cartridge.
It would be negligible, end of !.
There was a test in a magazine about 15 years ago. The result :
14” was complete burn under normal conditions for modern powder.
There was a few feet per second between 24 and 30, but nothing that would induce a miss
Anyone know what shooting glasses Johnny uses?
Usually Hiroki 2’s but was trying out some of the Laksen eyewear in this vid
@@tgsoutdoors what’s your opinion on them? Worth the money. I did look at them a while ago but they look almost flat glass in the videos I didn’t recognise them.
I'd buy that, if you are selling it 😂
That's bubba'ed
Do a full fitting job on this gun, lad
I want to see you put the six hours into it. You now you want to, you little gun tinkerer 😀
So why is the Nibby Nobby dictating the terms? 😂😂
Got to give him something!
@@tgsoutdoors How about an ice cream or a kabob? 😉
on this one , i prefer the be for , mate , sorry .
what a joke !! fxxked up that shotgun !!!
You ruined a nice old shotgun, I feel like I just watched you kill a puppy
😂
Video would only be improved by the addition of some gangster rap… #trendsetters
You're not getting a job at Purdey's
Sure they would allow at least 2 hours
Please go back and fix it properly. I know its a cheap gun but it dosent deserve the bubba treatment.
Just wait for episode 2 🙄
Overall, not bad. That hardly means good but it wasn't all bad. Except for the grip cap. That was bad. Very, very bad. Awful, terrible, downright shite. Did you do that for comic effect? Don't.
Unfortunately, I was committed 😂