I mine on windows with wsl2. And i also mine to that taiwan pool. You can create web wallet for now. And send bigger chunks later to nonkyc exchange. Also you need at least 200 spectre per transaction
Webb wallet too many transactions consolidate transactions and resend to yourself and so I did a little over 3000 coins disappeared and it will not let me send remaining coins out and the prefix address is correct that I'm trying to send to and it changed the receiving address in the web wallet rigs are still mining to the previous address?
You mustn't be able to read then, I was able to spin up a half dozen hive workers just by following the GitHub. Comprehension among a lot of you is very low
Excellent Video. Just a quick question. I have the main computer up running the node and the bridge. I take it you don't need to run the node on each computer but rather just point each to that address for the main node
I've been using different flight sheets rather than using tuning per machine because then I can switch to a different coin and switch back without having to change tuning. So for instance I can set Spectre up and then switch back to Qubic without having lost huge pages and thread settings. As I understand it we still need the ability to name multiple customs in Hive, Am I missing something here?
Hi @Rabid, I got this error when tried to run a node [WARN ] [UPnP] Error adding port mapping: IO error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (os error 10060) do you know how to fix this?
Mining on my personel computer with R9-3900XT. TNN Miner causes lag while using PC even with 22 Threads Allocated. is there any way to particularly disable "CPU 0" thread like GhostRider Algo.?
very very very good video, congratulations. Here it worked and it was easy to do. congratulations. Do you have a video like this teaching how to make the DERO NODE?
You can still mine using the GOLANG node and use the golang spectre-miner which comes with it, it's what i am currently doing and it will still work perfectly fine, i don't think RUST makes any difference at that point of time...
Ya it works but they want to move everything over to rust. Also if the galang is off for 2 or 3 days it wont sync and needs a updated datadir2 which is no longer being updated but if it never gets turned off should be good all the. Miners work with both nodes but the rust actually needs more manual commands as it doesn't read localhost like galang does which everything is defaulted to.
That did it, thanks!!! My windows rigs are mining perfectly but the hive wrapper won’t install from the discord link, I’ve left messages asking for help, hopefully they can help me figure it out
Thanks for the video! By running the node it mentions the data directory and after that the windows closes, any suggestions? I tried it at 2different pc's.
The node is running but what about this: [UPnP] Attempting to register upnp... (to disable run the node with --disable-upnp) [UPnP] Error adding port mapping: IO error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (os error 10060)
I have installed everything according to the video but in the end, when I click on TNN Miner file it says that this app cannot run on your computer. It is a windows 11 64bit. Rusty-Spectre file as well as bridge seems to open and work. Any thoughts??
@@RabidMining yup - It tries to start without the message but does not bring any screen up so cannot tell if it is functioning. Set threads to 4 for that processor. But to be honest I am experimenting on 5 Beelink SP12 Mini PC's with N100 processor to replace failing ETCPOW mining. They all have Windows 11 (unfortunatly!) Seems strange just the TNN Miner acts like it needs Windows 10 or 32bit with that message.
Thanks a lot!! I've foud and downloaded. But in some PCs works and in anothers dont, wihtout error message. Simply return to c:\ promt... do you know why?
I don’t understand. I followed you perfectly, and I’m stuck on step one. I downloaded and extracted both files you said, then made a start .bat file, when I click to run it, it comes up, says a few lines, then closes itself.
5.30 you closed your notepad and opened bridge already with your worker on it?? Did I lost some where? Where you set up your bridge with your worker? Gramm...where is tnn-miner link to download without DSKORd i dont have usa dscord.
Rabid, last few days mining Spectre noticing my 7950x3d (two of them) are mining at 6.2kh/s while my 5950x's are mining at 14 to 15kh/s. Running the 7950's at 32 threads, while the 5950x's at 30 threads.
@Rabid Mining - look how Spectre value are pumping up! Make more video about Spectre and say that everyone need to mine it!! Please please make another Spectre video!
the first day worked, today i start the tnn file and says "ERROR: lost connection to dev node (mining will continue) Will try to reconnect in 10 seconds..." what i need to do? thank you
@RabidMining Thanks for the How to ! I need to go back and redo everything, I think. Miner is showing 0 accepted and 0 rejected. It does show hashrate, difficulty,, and uptime. The bridge shows uptime, but not hashrate. So, figure I missed something somewhere........
You should be able to use a Linux variable for the thread count. If you use " --threads $(nproc) " instead of a number it should grab the max number of threads the CPU has. (**note** I'm not sure of Hive will be able to grab the variable from the OS, but can't hurt to try. It would make setting up multiple systems easier)
Awesome guide as always! Honestly, I do not know how you figure this stuff out 🤣First OMG I cannot believe I didn't know about the tuning feature!! Are you telling me I could have always used this to set OCS on things like OZM 🙄 I have almost got this working, but I get a custom exited (exitcode=0), waiting to cooldown a bit message. No idea what I have done wrong
I will say, my wallet address keeps changing every so often. Is this something I should be worried about, since it wont match my wallet address in my HiveOS?
How about showing everyone how to trade the coin so make all this so call fast cash its pump and dump right? s you show people how t mine all these coins but never show how to sell your coins so how bout doing something good with your privilege.
Hope This helps You get Up And Running!! UPDATE: win10 users node not starting try installing this aka.ms/vs/17/release/vc_redist.x64.exe
didint start on windows ?
I mine on windows with wsl2. And i also mine to that taiwan pool. You can create web wallet for now. And send bigger chunks later to nonkyc exchange. Also you need at least 200 spectre per transaction
Webb wallet too many transactions consolidate transactions and resend to yourself and so I did a little over 3000 coins disappeared and it will not let me send remaining coins out and the prefix address is correct that I'm trying to send to and it changed the receiving address in the web wallet rigs are still mining to the previous address?
@bearrichmond3698 goto the wallet tab and push compound a few times all I do
What about Windows 11?
Just started mining Spectre yesterday. Got 3 blocks already. Bridge froze a few times and needed a restart. Thank you for the tutorial Rabid 😊
thanks a lot rabid. their documentation was absolute garbage I couldn't figure out what to do yesterday.
Np
You mustn't be able to read then, I was able to spin up a half dozen hive workers just by following the GitHub. Comprehension among a lot of you is very low
@@RabidMining absolutely garbage they need training hahahahaa
Great tutorial as usual. You don't need to tune for each CPU. Just use --threads $(nproc) and it will pick up the maximum number of threads.
Yes that was added after I think
Ty for this one, getting into it today!
Thank you for the detailed tutorial.
Glad it was helpful!
Excellent Video. Just a quick question. I have the main computer up running the node and the bridge. I take it you don't need to run the node on each computer but rather just point each to that address for the main node
Correct point the rigs toward the 1 node
So many things to do. Especially for non tech people. I wish I could just press a button to start mining 🙂
Got mine going. Getting about 4 KH/s. Good video! Running on Ryzen 5 2600 in Win10. Using 10 threads.
Thanks for the tutorial, i try with 3 CPU for this project
I've been using different flight sheets rather than using tuning per machine because then I can switch to a different coin and switch back without having to change tuning. So for instance I can set Spectre up and then switch back to Qubic without having lost huge pages and thread settings. As I understand it we still need the ability to name multiple customs in Hive, Am I missing something here?
Hi @Rabid, I got this error when tried to run a node [WARN ] [UPnP] Error adding port mapping: IO error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (os error 10060) do you know how to fix this?
Ya I get it sometimes can try to reboot or just run it seems to work with the error still.
what to expect from Ryzen 5 2400G/16GB/512GB, tnx.
And thanks for the how to aswell❤🎉🎉🎉🎉
please make a update how to mine spectre with tnn miner directly to the pool without having to setup a extra node.
Mining on my personel computer with R9-3900XT. TNN Miner causes lag while using PC even with 22 Threads Allocated. is there any way to particularly disable "CPU 0" thread like GhostRider Algo.?
Can try to drop it to 20 threads depending on what your doing.
Forgot to mention doing this way how often or when does coins land in wallet??
very very very good video, congratulations.
Here it worked and it was easy to do.
congratulations.
Do you have a video like this teaching how to make the DERO NODE?
Yup
You can still mine using the GOLANG node and use the golang spectre-miner which comes with it, it's what i am currently doing and it will still work perfectly fine, i don't think RUST makes any difference at that point of time...
Ya it works but they want to move everything over to rust. Also if the galang is off for 2 or 3 days it wont sync and needs a updated datadir2 which is no longer being updated but if it never gets turned off should be good all the. Miners work with both nodes but the rust actually needs more manual commands as it doesn't read localhost like galang does which everything is defaulted to.
That did it, thanks!!! My windows rigs are mining perfectly but the hive wrapper won’t install from the discord link, I’ve left messages asking for help, hopefully they can help me figure it out
This is a new coin? Using the spectre protocol that yonatan sompolinski created?
Is the only spectre I am aware of
Why does my cmd window keep closing by itself?
Buenos dias disculpa cuando podrias pasar el nuevo Tnn-miner desde ya muchas gracias y siempre valoro tus aportes
Thanks for the video!
By running the node it mentions the data directory and after that the windows closes, any suggestions?
I tried it at 2different pc's.
The bat file set up correct? Try to run it with just the file no bat file see if that is the issue should still sync up.
@@RabidMining
The node is running but what about this:
[UPnP] Attempting to register upnp... (to disable run the node with --disable-upnp)
[UPnP] Error adding port mapping: IO error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (os error 10060)
Not sure sometimes I get that other times I don't lol
Nice thanks rabid
for windows, how does the payout work? does it pay to your wallet every timeframe or at like 11 spectre
Each time you hit a block
@@RabidMining ahhh i see thanks!!!!
Yes it is SOLO mining so you will get the full block each time
I have installed everything according to the video but in the end, when I click on TNN Miner file it says that this app cannot run on your computer. It is a windows 11 64bit. Rusty-Spectre file as well as bridge seems to open and work. Any thoughts??
Hmm haven't tried on win 11 did you try to run as admin?
@@RabidMining yup - It tries to start without the message but does not bring any screen up so cannot tell if it is functioning. Set threads to 4 for that processor. But to be honest I am experimenting on 5 Beelink SP12 Mini PC's with N100 processor to replace failing ETCPOW mining. They all have Windows 11 (unfortunatly!) Seems strange just the TNN Miner acts like it needs Windows 10 or 32bit with that message.
Rusty miner tutorial would be sweet.
Is a new miner now lol
Hello Rabid!! Thanks for the tutorial!! Cant find the TNN Miner download in Discord... could you help me with that?
Unofficial miners channel
Thanks a lot!! I've foud and downloaded. But in some PCs works and in anothers dont, wihtout error message. Simply return to c:\ promt... do you know why?
Bridge closes hitself out afew seconds after opening, not sure whats wrong
Check the config something is set wrong
Hey, question. What is a Dev Block ?
Goes to the miner dev
@@RabidMining Pretty much what I thought, Thanks !
I don’t understand. I followed you perfectly, and I’m stuck on step one. I downloaded and extracted both files you said, then made a start .bat file, when I click to run it, it comes up, says a few lines, then closes itself.
Check the pinned comment some windows I guess need that installed
5.30 you closed your notepad and opened bridge already with your worker on it?? Did I lost some where? Where you set up your bridge with your worker? Gramm...where is tnn-miner link to download without DSKORd i dont have usa dscord.
I might have to host it on my site
When I run tnn miner it says no host what am I doing wrong
Rabid, last few days mining Spectre noticing my 7950x3d (two of them) are mining at 6.2kh/s while my 5950x's are mining at 14 to 15kh/s. Running the 7950's at 32 threads, while the 5950x's at 30 threads.
Can try to set them down a thread what are the 7950x set at for clocks and volts?
can you update it with rusty?
can you add the link for the miner for HiveOs, I'm not sure where you got it from the discord. Thanks
It's in the spectre discord maybe I'll add it to my website to copy
@@RabidMining please add copy that link
@Rabid Mining - look how Spectre value are pumping up! Make more video about Spectre and say that everyone need to mine it!! Please please make another Spectre video!
Lol
can you share the install link, the discord link for hiveos.
the first day worked, today i start the tnn file and says "ERROR: lost connection to dev node (mining will continue)
Will try to reconnect in 10 seconds..." what i need to do? thank you
Try to restart the node pc
@RabidMining Thanks for the How to ! I need to go back and redo everything, I think. Miner is showing 0 accepted and 0 rejected. It does show hashrate, difficulty,, and uptime. The bridge shows uptime, but not hashrate. So, figure I missed something somewhere........
Weird....That was my Win 11 machine. I copied to my win 10 machine and, just changed the damonn-address with no other changes, and it works just fine.
Weird
@@RabidMining Interestingly, I tried to run it later and it worked just fine. Even hit a block within 3 seconds of launching.
@KrisC.777 nice
You should be able to use a Linux variable for the thread count. If you use " --threads $(nproc) " instead of a number it should grab the max number of threads the CPU has.
(**note** I'm not sure of Hive will be able to grab the variable from the OS, but can't hurt to try. It would make setting up multiple systems easier)
If it's in the wrapper, yes, nproc will work. I'm not sure if it was added to that one or not.
after editing the sprbridge config it doesnt show the rigs only warns that im not synced
Is the node synced?
How to download TNN miner? I can't find it on Discord. Thanks!
bro you can do with tw-pool? because i dont have idea how to setup this
finally its working with tw-pool just use the url and set the same parameters and its done
Some reason I can not find the bin, bridge, or config file after downloading the Gethub file. Any suggestions why I can not find them?
Did you extract them?
Yes I did and it is just showing the .exe and .bat files.
@MatthewSmith-ze7to some you won't have till you run it bridge should have the YAML file with it
Nervermind I figured it out.
How do you onow you hit a block?
Thank you!!!
You're welcome!
Can someone tell me if you can still mine with tnn version .36
I can't start running node, when click on start file, just shows for a sec and closing. Anybody know what it could be? thanks
Same problem here, no solution yet.
@@tunney86 it worked, one guy recommended to install latest microsoft visual c++ wnd re run node
@@tunney86 found solution, it worked. install latest microsoft visual c++ version and re run node, one guy recommended and yes I have it running
Same problem
@@jimw4346 latest microsoft visual c++ version, install it and no problems
Could someone help me by leaving the Installation URL to copy and paste!!!!
Lol
Might put the links on my site YT doesn't let them to be pasted correctly
when setting up the tnn start folder it open then closes
Might be a extra space or something somewhere
Awesome guide as always! Honestly, I do not know how you figure this stuff out 🤣First OMG I cannot believe I didn't know about the tuning feature!! Are you telling me I could have always used this to set OCS on things like OZM 🙄
I have almost got this working, but I get a custom exited (exitcode=0), waiting to cooldown a bit message. No idea what I have done wrong
Yup could use it for any miner maybe try to restart the node pc
32 Thread CPUs / 24 threads limit?
They are at 32 was just explaining the tuning process
can i mine 2 different coin at the same time on the same pc
Yes
I will say, my wallet address keeps changing every so often. Is this something I should be worried about, since it wont match my wallet address in my HiveOS?
No is normal don't worry coins end up at the same spot
Thanks 🙏
whats the value, where to exchange?
It's at the end of the video
Thanks brother
No problem
what about profit
when i run the miner its say unable to run2d.bin ??? what i do wrong ?
Haven't seen that in is the bat file correct?
How much is minned allready?
5% or something low
thanks
can we run this on multiple computeur with one wallet ?
Yes
Earnings are down network hashrate at 49 mh lol and going 7950x 2.50 dollars aday
Gracias por el tutorial, no puedo descarga el Tnn-miner Saludos
one word maybe next time about profit?
how to mining with linux
How about showing everyone how to trade the coin so make all this so call fast cash its pump and dump right? s you show people how t mine all these coins but never show how to sell your coins so how bout doing something good with your privilege.
Exchanges are at the end
норм
i got like 2 days no more payout before it was every 2 hours or so : ( hmm but i try again on my linux ^^
@RabidMining but in hiveos i have to run rust?
I dont havee discord can u link discord?
Thanks
I'll make a website page
Hey buddy I hope you're not mining the 32 thread cpus @ 24 threads! 🫣🤣
Lol no they are on 32