This loco sounds and runs to perfection. I can't say that for my SNCB 5204 version. I'm at the second replacement and have the same problem of the sound & lights cutting out 5 seconds after upstart. I can get the sound & lights on when running. But the sound while running is the same as idle and as soon the loc stops sound and lights cut out. No brake sound when set to speed step 0 - nothing. No reaction from Piko to my emails - even in german. I'm very disappointed and instead of enjoying this loc it's only stress ! I run on NCE Power Cab DCC and wonder if the decoder is NMRA compatible - reason for the problem ??? Success with yours !
@@knarbjerg2799 Thank you for you reply. Meanwhile I succeeded to contact Piko and finally found friendly help. It was just a matter of setting CV 250 to value 1 to make the decoder available for ALL DCC Stations since the latest update on the SmartDecoder XP 5.1. Now the 5204 SNCB engine runs and sound perfect ! It is time PIKO makes the FULL CV List available for users as do other makes like ESU and Zimo just to name a few. I added a Brake Function F25 by setting CV 142 to a value of 25. You can adjust the brake distance with CV 141 and response with CV 143 for high speed / CV 144 for slow speed.. For DCC set CV 145 to 4 or 8. This adds more control fun too. All the best and success. Cheers, Filip
Amazing Nohab sound, Miniature style ,Greetings from Scotland 🏴❤️🇩🇰🇧🇻🇮🇸
Tak for en grundig og interessant præsentation 😊
Selv tak :)
Excellent DSB atmosphere poor. The good old days have come back.
Pæn model, jer er lige ved at bestille en. Bare den fandtes i brun. På nogle fotos ser de sorte vindueslister voldsomt store ud...?
Mon ikke Piko sender en brun på markedet på et tidspunkt? Det tror jeg🙂
Heja✌🏻 I like this locomotive and their sound 🤗☺️
Det er smart at den automatisk regulerer omdrejningerne. Er det med Piko dekoder eller esu? Tak for rigtig fin demo.
Det er Pikos egen dekoder
Dejlig maskine og video! 🙂
Hvilket mærke/hvem laver de signaler som er på banen? 🙂
Signalerne er fra firmaet "Banetjenesten"
Den software, som styrer signalerne er specialfremstillet og kan ikke købes nogen steder
Så mangler vi bare nogle DSB passagervogne i den korrekte 1/87 længde fra Piko
Der er da heldigvis lavet masser af korrekte DSB passagervogne fra andre producenter, så man ikke behøver sidde og vente på Piko ;o)
This loco sounds and runs to perfection. I can't say that for my SNCB 5204 version. I'm at the second replacement and have the same problem of the sound & lights cutting out 5 seconds after upstart. I can get the sound & lights on when running. But the sound while running is the same as idle and as soon the loc stops sound and lights cut out. No brake sound when set to speed step 0 - nothing. No reaction from Piko to my emails - even in german. I'm very disappointed and instead of enjoying this loc it's only stress !
I run on NCE Power Cab DCC and wonder if the decoder is NMRA compatible - reason for the problem ??? Success with yours !
Sorry to hear your NOHAB is not working properly.
Have you tried running your locomotive on a model railroad with a different dcc system?
@@knarbjerg2799 Thank you for you reply. Meanwhile I succeeded to contact Piko and finally found friendly help. It was just a matter of setting CV 250 to value 1 to make the decoder available for ALL DCC Stations since the latest update on the SmartDecoder XP 5.1. Now the 5204 SNCB engine runs and sound perfect ! It is time PIKO makes the FULL CV List available for users as do other makes like ESU and Zimo just to name a few. I added a Brake Function F25 by setting CV 142 to a value of 25. You can adjust the brake distance with CV 141 and response with CV 143 for high speed / CV 144 for slow speed.. For DCC set CV 145 to 4 or 8. This adds more control fun too. All the best and success. Cheers, Filip