Attach the switch and buzzer. Then you need to install firmware first. After that buzzer will beep when it is successfully uploaded. The click on connect with COM=AUTO, BAUD Rate=115200. Once connected your COM and Baud rate will change automatically. Mine changed from AUTO to COM 11 and BaudRate changed from 115200 to 9600 after the connection.
Attach the switch and buzzer. Then you need to install firmware first. After that buzzer will beep when it is successfully uploaded. The click on connect with COM=AUTO, BAUD Rate=115200. Once connected your COM and Baud rate will change automatically. Mine changed from AUTO to COM 11 and BaudRate changed from 115200 to 9600 after the connection.
Thats work my master ❤
A million thanks... that worked for me too!
I had the same issue. Make sure your usb cable can transfer data and power then your pc will recognize the fc.
I have same problem. How to upload firmware
Did you figure out something. I have the same problem
sir i have same problem , Did you solve the problem? how can i fix it, please help ,
Connect the buzzer and the button. Then, use a different usb cable. My cable had a problem and replaced. All was fine.
I have same problem sir. How to upload firmware on pixhawk flight controller. Please make a video on that. Sir.
Did you solve problem?
anyone knows how to fix this??? have the same issue , pls help
Same thing to me it doesn't work
Your pixhawk not initializing. You need to install firmware first.
And I changed cable also. It won't work.
conecte pixhawk to jlink and uplaod bootloader