A truck for cutting glass tubes or bottles. Dip a sowing thread in alcohol, wrap it around where you want cut and set it in fire. Wait a few seconds then put it under cold water. It'll crack along the thread line
Cool 😎 project…. Wonder if you can use a long single glass syringe to power the thermostatic engine instead of an additional test tube at the end?? Thx
If you added a constriction between the heated chamber and the piston it will work better. The constriction itself will help with the formation of low pressure region that would pull the piston back in
um salve do Brasil + like. máquinas como essas são incríveis. até a NASA se interessou por elas na corrida espacial usando espelhos para concentrar a radiação solar. tá uma ideia pra um vídeo: Motor Stirling solar. parabéns.
Блин!!!!!!!!!!!!!! Мистика какая -то!!!!!)))) Несколько дней уже обдумываю - не сделать ли паровой двигатель , и для опять же будущего генератора (мысли магнитные кружатся )))!!!) и даже для чего нибудь, что по по снегу двигаться будет и этот чёртов снег убирать! Само собой даже картинка подобная, на белом , "заснеженном" поле перед глазами мерещилась!!! (Мысленные эксперементы!!!) И вот тебе - на!!!))) Как говорится сон - в руку , а тут фантастика, такое совпадение - Видео - руку!)))) Не вру в натуре, немного даже в шоке!!!)) Прям какой - то знак свыше!!!))) Классный видос!!! Лайк!
did it work? cause were making project to light up an led and we saw a video in youtube that mislead us and now were going to start all over again thank you
Yes, I also did not perfect, in this engine, it is important to thorough mechanical accuracy and rigidity. This applies especially to the flywheel, it should be done on a lathe, but my flywheel is made by hand.
What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him
Great job! Thank you for sharing it. Just an observation: in the materials section (0:43) you wrote "glass siringe 20 mL", but the syringe you use is a 10mL one.
I have not experimented with different syringes and test tubes, but I think that you can use different ones. Thermoacoustic engines have a feature: less volume - higher frequency / speed, more - vice versa.
@grain, can u tell me specifically what materials did you use in the thermoacoustic engine, including the wood, those rubber things in the screws, and the measurements too of the wood and that peg that fastens the wheel? Thanks.
Una pregunta,ese motor funcionaria con el calor del sol enfocado a traves de una lupa??...y si tiene cierto torque..para poder colocar una pequeña dinamo
Yes, I also got some broken ones. Some sellers do bad packaging. And not all syringes are well suited for such use as in the video, because the piston does not move very smoothly. It is necessary to polish it with graphite or with another grinding paste.
I don’t know, try it, but if it is thicker, it may work worse. What I used can be bought, I give links under the video to the materials that you can buy. www.aliexpress.com/item/32702827031.html
Do you know if it works, if i use a test tube of 16x150ml?, because i can't find a test tube of 15x150ml nearly or it's necesary change the syringes too?
dear if u can help me it will be great. i was buy from ebay cheap strling engine.. was build it good. but try light it with 70% alchoel but it spin and stop. i need pure 95% alchoel? this make any diffrence what fire u use? tnx alot
No matter what you warm, the difference in temperature at the ends of the tube is important. You can use alcohol, gasoline, firewood, candles for heating, whatever.
Links to materials are in the video description. Steel wool is needed so that the heated air does not move independently, it is moved by the piston. www.aliexpress.com/item/32702827031.html
I love the ingenuity in the use of whatever is available. Great video!
Very very nice video. Before I didn't understand how does it work but now I have understood it!
CD-RW discs work so much better than just CD-R ones, literally doubles the speed of the engine. Great job!
Another great and educational video.
I’ve been wanting to build one of these. Beautiful, thank you!
It is fake.
The total system work depends on motor by electric.
realy the simpliest concept. great one, thanks for sharing. kinda thermoacoustic
Simply superb 👍 Village Science Factory gonna make this video 👍
Grain, that is beautiful.
Awesome work. i just found your videos and I've learnt a lot from them . I just subbed. i can't wait to see what you will be doing next. cheers!
With use sir
A truck for cutting glass tubes or bottles. Dip a sowing thread in alcohol, wrap it around where you want cut and set it in fire. Wait a few seconds then put it under cold water. It'll crack along the thread line
Buen video felicitaciones saludos desde Ecuador 🇪🇨
So beautiful meni engine thank you sir 🤝🇧🇩✔
These are awesome, any idea of the power density though? How big would a 1kw one be?
It’s really worked. Thank you sir.🇧🇩
One of the best on TH-cam
Wowww...!!
I was searching for such type engine. Nd my search has stopped on this video😊..
It's great I will try it in my home
i love this ! maybe use stainless steel wool and add a bit of water next time!
country boy why do you add water?
Sharva Paralkar so one side is colder wich can make it even faster
вот это уже полезно. продолжаем так же
Very nice idea watching from India
What about the metal thing you attached to the back of the syringe pump,whats it called ?
Cool 😎 project…. Wonder if you can use a long single glass syringe to power the thermostatic engine instead of an additional test tube at the end?? Thx
If you added a constriction between the heated chamber and the piston it will work better. The constriction itself will help with the formation of low pressure region that would pull the piston back in
6:09
looks like it works well
Really fantastic.... I like it
It's a very nice experiment I enjoyed it, please, continue making videos.
Thanks, I will try.
@@grain8314 Sir
Please suggest me any final year project. I'm student of Mechanical Engineering. From Pakistan
do we have to replace the metal in the test tube?
Really fantastic
Very, very good!!!!
Excellent work
how long it work.and what is damage
Excellent!
um salve do Brasil + like. máquinas como essas são incríveis. até a NASA se interessou por elas na corrida espacial usando espelhos para concentrar a radiação solar. tá uma ideia pra um vídeo: Motor Stirling solar. parabéns.
Can't understand
Блин!!!!!!!!!!!!!! Мистика какая -то!!!!!)))) Несколько дней уже обдумываю - не сделать ли паровой двигатель , и для опять же будущего генератора (мысли магнитные кружатся )))!!!) и даже для чего нибудь, что по по снегу двигаться будет и этот чёртов снег убирать! Само собой даже картинка подобная, на белом , "заснеженном" поле перед глазами мерещилась!!! (Мысленные эксперементы!!!) И вот тебе - на!!!))) Как говорится сон - в руку , а тут фантастика, такое совпадение - Видео - руку!)))) Не вру в натуре, немного даже в шоке!!!)) Прям какой - то знак свыше!!!))) Классный видос!!! Лайк!
Спасибо, но я не понял, какая связь с паровым двигателем. :)
@@grain8314 Ну мысленная картинка была вся, почти как у вас, только скажем в пробирке вода. И клапан.))
Awesome video. Please help me out. How's the packing done. And after packing, should I take out the piston from the syringe.
As always, well done my friend!
Thank you!
Sir have u removed black washer which is attached up to the piston
Hey grain....can we use a metal piston and tube...please answer its urgent
Amazing 👌
Красиво сделано!
Nice idea
Awesome thanks 😊
Im amazed I will make one. Thanx
did it work? cause were making project to light up an led and we saw a video in youtube that mislead us and now were going to start all over again thank you
bravo , rar de văzut așa ceva
Thanks for sharing
Oh, come on man - please turn the last CD upside down so that it's pretty on both sides. :-)
OCD?
Amazing! Thank you for making this Awesone Tutorial. Also, i know how to make that
I don't give a shit of what you can or cannot do. Stfu dumbass
What is the time required for provide heat?
Where could I get the glass tube ?
It's a beautiful engine. I liked Stirling engine and I have made some thermoecoustic Stirling engine, but it's not as good as yours. Thanks Grain.
Yes, I also did not perfect, in this engine, it is important to thorough mechanical accuracy and rigidity. This applies especially to the flywheel, it should be done on a lathe, but my flywheel is made by hand.
@@grain8314 Yes I know. Thanks
Congratulations, this engine really is not easy to make it work.
Leandro Wagner.
Thank! You are right, without experience it is difficult.
You have a large collection on your channel on this topic!
What Is Islam?
Islam is not just another religion.
It is the same message preached by Moses, Jesus and Abraham.
Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
It reminds us that since God created us, no one should be worshipped except God alone.
It also teaches that God is nothing like a human being or like anything that we can imagine.
The concept of God is summarized in the Quran as:
{ “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)
Becoming a Muslim is not turning your back to Jesus.
Rather it’s going back to the original teachings of Jesus and obeying him
?
ahmd abdallah
Isn’t Islam that religion which instructs you to murder anyone who refuses to agree with you?
спасибо за интересные видео
И вам за просмотры и отзывы.
Great job! Thank you for sharing it.
Just an observation: in the materials section (0:43) you wrote "glass siringe 20 mL", but the syringe you use is a 10mL one.
Sure I will try it
Where can you buy heat resistant tape from?
Where do you get that fast adhesive glue? The one with the liquid and spray. It's not available on ebay UK!?
I do not know, I buy from us in Moldova. Their site is indicated on the bottle - www.somafix.com.tr/
super glue and activator
can we use steel wire
hello! where did you get the metal from 2:10? thank you!
I bent and hid the copper plate. You can use other material.
Can we use 5ml syringe?
If no then what mm testube should we use to match wit the 5ml syringe
I have not experimented with different syringes and test tubes, but I think that you can use different ones. Thermoacoustic engines have a feature: less volume - higher frequency / speed, more - vice versa.
@grain, can u tell me specifically what materials did you use in the thermoacoustic engine, including the wood, those rubber things in the screws, and the measurements too of the wood and that peg that fastens the wheel? Thanks.
All this was done without drawings, approximately. I dismantled it and forgot, I'm sorry.
But do u still remember the measurements, because I’m planning to build an engine like yours. But thanks anyways.
I needed the measurements for wood.
the woods are 2x4@@mikaelafrias7786
You are great
The steel wool acts a heat sink?
Starting of video is like ASMR
👂 🎧 👂
Engineers ASMR
Will this power a phone? Also can you scale it down a tone? Like pocket sized?
To charge the phone is not effective. I advise you a solar panel - th-cam.com/video/WWKRbpPzECc/w-d-xo.html
Why do we add a counter weight, does that not reduce the quantity of power output?
How does piston rotates
you give me very much khow how ever! thank
Yes awesome your work
How to find power to temperature ration for such engine?
@grain can it made with 1 cd or not
Nice video.Kindly explain how it works. Thanks.
en.wikipedia.org/wiki/Thermoacoustic_heat_engine
Chic parabéns 💃
Una pregunta,ese motor funcionaria con el calor del sol enfocado a traves de una lupa??...y si tiene cierto torque..para poder colocar una pequeña dinamo
Podias poner en el cd,uos imanes de neodimio...y con una bobina...pues generar la electricudad para cargar un movil,tal vez.
Perfect
nice one.
I ordered some glass syringes but the first one arrived broken so I have to wait for the others to arrive.
Yes, I also got some broken ones. Some sellers do bad packaging. And not all syringes are well suited for such use as in the video, because the piston does not move very smoothly. It is necessary to polish it with graphite or with another grinding paste.
Директо с большова диаметра и длинны спринцовки не получется ли также, просто без епруветки.
Can i ask what the different of steel wool for photography and normal steel wool? Can i use steel wool for photography?
I don’t know, try it, but if it is thicker, it may work worse. What I used can be bought, I give links under the video to the materials that you can buy. www.aliexpress.com/item/32702827031.html
Is there a leak made in the joint packing. Please elaborate
The joint packing must be airtight.
Where is the air inside cooling? if the wool is cooling the air, how long? I am skeptical.
You are right, this is not an effective design. But this is only a model to demonstrate the principle.
Do you know if it works, if i use a test tube of 16x150ml?, because i can't find a test tube of 15x150ml nearly or it's necesary change the syringes too?
Your test tube is also suitable.
@grain I have noticed a trend of steel wool and wondering what that does for the engine
Steel wool prevents the heated air from moving freely.
@@grain8314 ok thanks, I am currently trying to make one myself
Brp you deserve 5 🌟🌟 🌟 🌟 🌟
very.GOOOOOOOOOOOOOOODD job
Grain what is the thing on the syringe can anyone tell
I made it as it is ! The expansion of piston is taking place but it is not sucking back again 😕😕can u helpout
Great job!
please can someone tell me why is steel wool used?
Awesome
I think it is best and easy way to build this
From India
nice
you can see my channel #PelushB
The disk is like " this isn't the beat I had in mind"
Could you please explain the theory/principle? Why do you use the steel wool? Thanks a lot
steel wool retards the movement of warm air
@@grain8314 retard?
dear if u can help me it will be great. i was buy from ebay cheap strling engine.. was build it good. but try light it with 70% alchoel but it spin and stop. i need pure 95% alchoel? this make any diffrence what fire u use? tnx alot
No matter what you warm, the difference in temperature at the ends of the tube is important. You can use alcohol, gasoline, firewood, candles for heating, whatever.
@@grain8314 so if it spin like 4 sec and stop. mybe i have air leak? or piston leak.?... thank u so much for answer me. god bless u.
I don't know, maybe a leak or something else. It's hard to say something without seeing anything.
EXCELLENT sirji
My brother can tell me what is the material that is in the middle of the tube and what is its role
Links to materials are in the video description. Steel wool is needed so that the heated air does not move independently, it is moved by the piston. www.aliexpress.com/item/32702827031.html
Why did you use heat in the final step? How does it helps the movement?
The greater the temperature difference, the more energy the engine gives. This engine is based on temperature differences.
grain how long do we need to heat it for it to moves?
What this steel wool is compulsory to use?
Any steel wool will work, but better with thin wire.
perfekt super Video Danke
Nice
Is there any one feels uncomfortable when trimming glass
A little bit, not the worst tho
Nice video bro would you please link me products used in projects
Sub for more great experience experiments video click here #Adiikeexperiments
#professionalcyclistAdityaGupta