The Ultimate Guide to Fitting a Maxton Design Rear Diffuser on a Peugeot RCZ

In this video, I show you how to fit a Maxton Design rear diffuser on a 2010 Peugeot RCZ in. This is a relatively straightforward process, but there are a few things you need to keep in mind to make sure the diffuser is fitted correctly.
*Here's what you'll need:*
A Maxton Design rear diffuser for Peugeot RCZ
A Drill
8mm Drill Bit
8mm Spanner
8mm Rachet
A friend to help you or a jack/supporting device to hold in place
*Instructions:*
1. Elevate rear of car
2. The diffuser will be attached to the bumper using 2x bolts and 3m tape.
3. Once the diffuser is attached, lower the car.
*Here are a few tips:*
Make sure to level the diffuser before you attach it to the bumper.
Be careful not to overtighten the screws and bolts when attaching the diffuser to the bumper.
If you are having trouble installing the diffuser, ask a friend for help.
*Once you have installed the diffuser, your Peugeot RCZ will look more aggressive and sporty.*
*Enjoy the video!*
*P.S.* If you have any questions, please leave a comment below. I will do my best to answer them.
*Additional tips:*
Clean the diffuser before installation
Clean the lower bumper with alcohol before sticking the 3m tape