1980 Autocar "Construcktor" Returns to the Road after many many Years!
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2022
- All videos on this truck can be seen here:
• 1980 Autocar "Construc...
Grab Yourself a Hat and a Shirt from the Merch Store! DieselCreek.com/
Like something you see in a video? good chance its linked in my Amazon Store: www.amazon.com/shop/dieselcreek
Save yourself 5% and help support the channel by Getting some sweet gear from Yankum Ropes here!
yankum.com/?afmc=dieselcreek
Use the code dieselcreek at checkout for 5% off your purchase!
Follow me on Instagram & Facebook @dieselcreek to see what i'm up to before it hits TH-cam!
#DieselCreek
-Custom Music made for me by Vinnie Longhi of the Semi-Supervillains
Check them out here: / tssvillains
-Wanna send me something? Sent it to:
Diesel Creek
P.O. Box 109
Burgettstown PA 15021-0109 - ยานยนต์และพาหนะ
![Yoshi Rinrada - 'มาทำไม' [Official MV]](http://i.ytimg.com/vi/r41xbfRLkLs/mqdefault.jpg)
If that's a military trailer, we have two different sized king pins. The M915's have a smaller kingpin for our fuel trailers and flatbeds. The M916's have a much larger kingpin for the low boys. It's the only truck we use to tow a lowboy, that low boy pin may be bigger than the jaws will close on. Just an idea.
Oh, that is a consideration I hadn't thought of since I've never been in the military. Using different king pin sizes seems pretty terrible.
@@kmg501 there are reasons for the different sizes considering the military has many pieces of large equipment to haul.
Love the old Autocar!
Great video Matt!
Thanks!
I agree 100% with Ryan. I think they sell a Go No Go gauge for king pins as well. They use it to check wear and tolerances on the king pin and jaws
Never heard of such a thing. Would never have considered it as the problem. Different size pin sounds like a very bad idea to me.
I KNEW the truck repairmen were slacking. It takes them three hours to arrive and change a tire, and you got half of a full restoration done in 55 minutes. :) Congrats on the progress.
My name is Lloyd from B.C. Canada, that’s a neat old Autocar, quite a show piece. I rescued a 63 IHC F-250 from a junk yard and restored it, it had a long nose butterfly hood like your Autocar, with a 290 Cummins with a 5x4 trans. I did some stuff to the 290 and ended up that I could out pull a 400 Cummins going up a steep hill carrying the same weight, they’re a great old engine. I love watching your resto jobs as I used to try and restore every piece of equipment I could find but am too old now,79, and not able to do it anymore. But I can relive those days watching you do your restorations, it’s like I’m right there too. Keep up the good work and God bless!
My favorite thing about this video is the truck is going back to WORK. I love to see the old machinery used as it was intended, not just going to car shows. Thanks for the video!
I love how if he makes a mistake, instead of not putting it in the video he corrects himself
hes just proving that he doesnt know what hes doing like he says so many times, but gets the job done anyways and learns how to do it right, trial by fire
I never give advice on these channels but it may save someone else from the trouble you had so here's a first for me. 1. When trying to get the axle out, instead of fighting with the little wedges, smack the axle center end with a sledgehammer. It will bounce back and drive the wedges out. 2. Caging the brake chamber should have released the brakes so you may have a different problem with the brakes sticking. 3. Not sure if you did because the video didn't show it but you should have filled the hub "well" with gear lube to make sure the bearings had oil right away. The spinning axle will eventually carry oil out to the end of the axle tube but it may take a bit and that's not good for the bearings. Lastly you should change the axle housing vent. If it's plugged it could build pressure as it warms up driving and force oil past old seals. Thanks Matt for what you do!
Art is right. Caging should have backed brake off you have a problem with chamber or s-cam.
Caging the brakes doesn't return yhem to the lowest possible point, you also need to back the s cam off to get the brake pads to the lowest possible point. The drum is wiser than the pads, this leaves a lip around the outside of the drum as it wears.
@@garymurt9112 Yes that lip can be that big that it's almost impossible to take the drum off...found it on a small passenger car, together with rusted solid adjusters, so no chance to loosen the pads, was a nightmare...
100% on that hitting the axle in the middle will free up the wedges and release the axle
I agree 100%
This brings back memories of working on my old 92 Peterbilt 379. Sounds and looks so similar in the cab. Even the low air pressure alarm sounded the same
@@arthurboyd522 yew
fesgseg
As a former truck driver, I have a suggestion: Mount some blind spot mirrors to those two poles sticking up off the front bumper. Having mirrors there will help immensely with lane changing and, in some cases, backing your rig in tight spots. I'm talking like huge blind spot mirrors, btw.
If he wanted your opinion he would have asked for it
@@bobwalton3642 No need to be so rude. Chill.
@@hayleyxyz not being rude just speaking the truth
Super truckers are great at giving out opinions without want or need. After 3 years, I got away from that industry because I couldn't handle a$$hole truckers anymore.
@@bobwalton3642 if JHVShack over there wanted your opinion he'd ask, yet he didn't so sit your keyboard warrior ass down
Matt you are a true man when you can admitt to paying your "stupid tax" when you realize later that you done something the hard way or that you made a mistake. I really like the fact you take your lumps but do not give up and get the job done. Can't wait for the shop build videos.
Matt can you register it as an antique vehicle and still use it to work limited?
@@Military-Museum-LP If PA is anything like Ohio those historical plates are only to be used for heading to and from events like car shows etc. and for driving to the shop for maintenance. I tried to get one for my bike (1981 Kawasaki KZ650) and was told if I got pulled over while commuting there would be problems. She didn't elaborate on what type of problems. Seems kinda dumb to me, and looking over the Ohio Revised Code I don't see any consequences listed (fines, etc) for using a historical plated vehicle for whatever I want, although the code does specify they are for shows etc only. I am not an attorney, and I'm definitely not your attorney, so don't take my comment as advice.
L)llama llll
My brother was a diesel mechanic in the '70's and '80's and I can remember him working on a lot of the same equipment that we see you working on,Matt. Definitely brings back some good memories of when that truck was new
Those are cone washers holding that axle in. They make a special pliers to get them out easily.
Just a friendly tip, Whenever you replace a wheel seal jack up the opposite side of the axle when finished so oil runs back in the hub and you won't run on dry bearings at first. Keep up the good work
Add half a bottle of gear oil right before axle goes in would work also. 👍
We always pre-lubed the bearings.
A couple of things. 1, Great job so far. Trucks looking great. As for the 5th wheel. There are 2 pins holding it to the mount. Take them out and turn the 5th wheel over. You then have access to all the inner workings. Clean and lube well. 2. Wow, don't hit it that hard. You will crack/break your king pin. All the inner workings of the hitch can be removed. Take it apart and clean it well, then lube it. Keep going. You will have that truck on the road in no time.
Just checking someone pointed out your point 2 because holy moley I almost booked plane tickets to PA so I could go smack him on te cheek for that.
In addition to what Mike said, there are two king pin sizes. Confirm your pin is correct, some Mil trailers are the larger, some aren't. The "lock" on the jaws acts exactly like an older door striker, there is probably old grease/mud/filth in the locking paw keeping it from activating or the spring is broken.
Also, on the inner drum seal. On Dayton style wheels you can pull the axle out and then your tires/wheels/hub/drum can come off with the single bearing nut. They make special wheel jacks to roll them off together, but can easily be accomplished with lubricated PVC pipes and slide the complete assembly.
Also, also, wheel/tire over fenders with much shorter rear flaps have become more common because of what happened with yours. As well as slinging rocks from a jobsite on to whatever you pull off that jobsite. After you buy a few windshields for your friends excavators.... you see the cost of the wheel fenders are worth every penny.
@@MrAPCProductions yeah we used greased plywood to slide the wheel tire drum assy off as one unit...that rig is epic
@@MrAPCProductions glad you said something about the fenders. I puckered when I saw those standard mud flaps go on.
I'm thinking that when you prang the pin like that, the load bounces away from the throat of the plate before the claws can close. Easy Does it, man! We had a guy who hooked up like that, and ended up overrunning the 5th wheel. With the pin on the other side of the plate we had an Helluva time getting him separated. Punched a hole in the back of the cab with the air connector block.
I can't believe I spend an hour watching these videos and it seems like 15 minutes. It's like some kind of therapy.
Agree with you! All this videos always give me a smile! Genius of mechanic! Great Music! What else....😂 Sorry if i make mistake in my message I post this from France. 😅
I watched and I don't know a damn thing about trucks.
i dig that old truck! a tip i learned when pulling axle shafts on highway trucks is to hit the outside of the axle right in the center with a few sharp snaps of a sledge. not too hard but its usually enough to pop out those cones and the axle shaft a hair. then you push the axle back in a bit and pull the cones with your fingers.
Hey Matt, your apportion plate needs to be on front bumper. When you pull a trailer it blocks the plate. This is why you see power units with the registration plate on front bumper. Love your videos
That truck is going to be the beast of a older “construcktor” autocar, hope it works flawlessly!
Just amazing that he just gets a license plate, and can drive it in the condition it is in.
Here the truck would have to pass an inspection before getting the plates, the truck would have to be tested to see that it brakes enough and evenly, the headlamps needed to be adjusted with proper equipment for it to not blind oncoming motorists, and driving the truck with no trailer, would not be allowed, as long as there are nothing covering the wheels.
Also, all of the lamps would have be to either factory lamps, or lamps that has been approved for use on that particular make and model.
Also, just adding a "random" trailer attachment like that would definitively be a big no no. :)
Also, here trucks have to pass inspections every 12 months to be road legal.
@@JohnDoe-bd5sz Where is it you have all these rules?
@@danssmokintreasures I bet its in the uk
@@JohnDoe-bd5sz i dont think matt is gonna drive it illegal down the road that wont last very long before gets busted.....the truck will get all the required documents and inspections before it hits the road.. 100% matt doesn't screw arund if u have been watchin his videos u would know
@@JohnDoe-bd5sz they have temp plates so u can get the saftey done within 10 days or something
Lifting the grader with the forks was yet another OSHA approved procedure!!
You know the Willy Wonka song popped in my head the moment I saw him do that....lol
A simple tug one or two feet forward would have opened up a lot of space and would be a lot safer.
I was like "You're seriously going to trust that with Christine?!"
@@Denpachii hard to just tug it when the blade is on the ground huh.
No. If a construction worker is truly self-employed - is not an employee - and has no employees working for him or her, OSHA has no authority to require that individual to abide by OSHA construction requirements.
Matt, one thing I believe you are in desperate need of in almost every video I've watched and that would be an industrial press. I lost count on how many times you could have used one to make the job go easier and faster. Even home projects demand time management. Love your channel, man!
I always enjoy seeing it, tks. I am 84 years old born 3-11-39. 20 years retired US Army. all good, be safe k
Matt, for never doing a wheel seal job on a big truck, you did pretty well. I was a school bus mechanic for 43+ years, so I probably have done literally 100’s of them, a couple pointers, smack the end of the axle after the bolts are out and it will “ bounce “ right out, second, I always used to fill the crater between the two bearings with 80w-90 before I put the hub back on, and then I tipped the whole rear end to the side that I had off so it would send differential grease down the tube and lube the bearings. Nice work. This truck is a beast!
Love the old tricks folks share with us here. Cheers buddy!
You will get a BIG yes on that extra oil in between the bearings , or take truck and pull up on the rock pile and let the oil run out of the diff into the bearings ! What I did 🤔
@@davidcatlette9697 most of the motor coaches actually had a plug in the axle that you could clock to the top and fill it with oil. Kinda like a planetary
Matt, What Greg said on whacking the axle to bounce the axle and release the wedges. They also make a nifty tool to grab and open the wedges for ease of removal. You got a few trucks with those axle wedges, get the tool to say you time.
I am a current school bus mechanic. I do the same trick of hitting the axle with a hammer to get the cones to pop. Just have to be careful cause they will shoot across the shop
42:36 Hahaha, I had to timestamp this. Made my day. (: Listening to two voices at once definitely makes it feel like a shop environment.
If you ain't makin mistakes you ain't lernin. There will always be mistakes the first time you do anything. My truck has the same type of wheels and I struggled for 4 hours trying to get one wheel off the hub that was stuck. I got on the internet and a guy said just give it one wack with a hammer on the top spoke, and the dang thang came right off in 1 second. Thanks for the great video, from watching you, I can now change the seals on my truck if they ever start leaking.
Back when I was a truck mechanic to do wheel seals we left the wheels, hub and brake drum all together and simply removed the hub nut and pulled the whole thing as one big assembly. You could do wheel seals in about 10 mins if you got really good at them with no need for retourqes or dealing with the god awful spoke wheel wedges.
When you inevitably have to do the three other oil seals, on the drive axles (and possible on the front axle) look closely on the locking ring, it is not symmetrical, and that is on purpose, if you turn it around, you get a "new" row of holes, right between where they were a second ago. I commend you for repairing something you have never worked on before, and having success at that. I have never worked on a semi axle before, but have worked on a Dana 70 ( 80 ?) so I would work the semi axle, but I have never dared to take a diesel injection pump apart as you have, and I might never dare to. Keep up the great work.
Love it. Do yourself a favor after you get the 5th wheel locks working. When backing under don’t slam the pin. You can actually cause more damage. When working properly just bumping it is all it takes. It’s a rookie thing that I used to see pretty often. Can’t wait to see her the road.
Love that old truck, it’s a real weapon
That's one of coolest autocars I've ever seen,I know it's alot of work but we'll worth it ,I don't think anyone will mess with ya out there driveing that tractor.take care.
Matt, rule of thumb on flap length:
Measure from hub center to flap,
Set flap 1/3 that distance from the ground.
Wish I was 40 years younger to go up there and watch you do your thing. These are wonderful videos, and they show a determination, intelligence and cleverness that makes the USA a great as it is. Thank you Matt!
first channel that gives me a sense of reality, other channels make mechanics look like something easy and simple which is false. You have gained a follower my friend... good luck in your projects and greetings from Honduras.
Even though these bearings will get oil, I would have put a thin coating if axle grease on them and the races before re-installing them.
We had an old Diamond T with a Buda diesel and it hauled rock during the building of the LBJ around Dallas/Ft. Worth.
Had to replace a broken axle-I can *still* feel your pain!
My *absolute worst* gravel-pit repair was an old IH with a huge gas engine and cable dump. During a lift the cable slipped and it dropped so hard that that one broke an axle. It must have stressed the two-speed gear collar, as we found pieces of it when we pulled the axle. Had to drop the godawful-heavy rear right there in the side of the pit road, replace the two-speed gear, lift the rear end back up and re-engage it with the housing bolts.
Naturally, the new paper gasket tore, so we put layer upon layer of cotton string around the housing bolts, each layer bedded in axle grease, one layer piled on the next, then tightened up the housing.
This actually worked-didn’t leak a a drop and the truck was repaired. Three days!
Hey when I first got out of school in the 80's I worked on trucks for 5 years before moving on to cranes. I used to rebuild alot of fifth wheels, I would pop out the pins on flip them over onto a bench and replace everything and had a dummy pin to adjust the latches. That axle seal you were replacing ya cage the brake then back off the S cam. When you set the bearing preload on the axle hub if the locking ring does not line up with the tit slide it off flip it 180 and reinstall and will probably line up the holes on the ring are offset to the tang that is on it.
Matt you should never remove the lug nuts completely until you free the keeper wedges as some times they can come off like a shotgun blast
They can really mess you up. I have said this a few times on different channels and always get laughed at though
Those wedges are no joke, especially if they're been on for a long time.
Hey explains that in the video he knows what he is doing.
When I was younger a friend was fixing a flat on one of those split rims. The rim popped off and killed the man. My father had a cage built with thick wall pipes. Just in case it ever happened again the men would be safe. After we had the cage no rims ever come loose. But it did make you feel better with the cage
@@Itz_Twiz Yes to a certain point he does but he still hasn’t walked one who you talk to good wrenches . Nobody is above learning and he doesn’t have experience yet but he will in a few more years
That new stack assembly is a thing of beauty. Makes the old gal look 10 years younger.
I worked for a guy here in Texas and he had two of these big trucks.Nothing like driving these beasties!
Take the pivot bolts out of the fifth wheel plate, flip it over, clean and inspect the underside of the plate. You are probably missing at least one spring. That fifth looks ancient but you still might be able to get a spring kit for it. Also, take that problem very very seriously. The last thing you want is a disconnect.
Amen!
Matt, love the vid. The Autocar Construcktor is a beast! BTW, you'll need a couple of Diesel Creek flags in the flag mounts up front. I think your channel is the best for resurrecting old iron. Really have to hand it to you for the way you dive into a problem and explain the fix as you repair/replace the problem. Its amzing you have such patience for these projects. Your "hobby" is both inspirational and educational. Keep up the great work.
*- I agree with each point of recognition and encouragement you penned.*
If I can suggest,when you reassemble the cleaned bearings,always schmeer a bit of oil/grease on them to prevent metal to metal contact as you wind in the preload and for the first turns 'till the oil from the pumpkin spills out into the hub. You could use socket head cap screws for the mudflap mounts.available in hi tensile and stainless 👍Nice job pal🙃
This is very sentimental to me ! Awesome job so far ! When I was around 10 in the early 90s I remember an old tandem dump truck grandpa had, most were international S series or Ford L9000 but this was a 73 White konstuctor , with the 555 Cummins and a Allison auto. At 12 I was stockpiling on-site. Great memories!
been watching since you started the channel and i love every episode but the number 1 thing that intrigues me the most is the fact that matt does all this work alone!
that is simply amazing!
now ive been playing with trucks and equipment all my life and let me tell you that none of this is easy!
its grunt work everything is heavy and dirty and rusty. one must be very strong physically and very determined to win with these old iron creatures!
i have tons on respect for you sir!
if more men were like you this world would be a much better place!
as for the autocar. that is one of the toughest trucks ever build they last forever and just dont break
reminds me of the old pacific trucks!
probably related? but not sure?
anyway.
great video as always
youre a great achiever!
and thats why we watch your videos!
keep on the good work!
thank you!
Not very smart, either. Hes gonna end up dropping a piece of equipment on him and noone else is there to help him. The way he uses the lift forks to lift the grader and other equipment is gonna bite him on the qss someday.. He forgets things all the time and ends up figuring it out after the fact.Not a good or safe way to run a shop..
@@grandtheftautotune7715 It must be amazing to be yourself. Not too sure you'd have the testicles to speak directly to him.
@@grandtheftautotune7715 It sounds like you're completely disappointed and dissatisfied with Matt's methods of doing things..., you are very welcome to quit watching his videos.
Otherwise, quit 'cher belly aching and stop being Debbie Downer!
The true criminal is the state charging $2500 a year to own a truck
@@grandtheftautotune7715 NOT Bite your tongue...invite the devil? For shame, SMFH
Nothing to see on your channel but 😖 'nigga' tunes
As a retired truckie from down under. That rust bucket is in need of a lot of loving Matt. I'm not going to tell you what needs doing, the truck will tell you that. I look forward to watching your videos. Your a hard worker mate. 👌✌🙏
Beautiful sight of a true old legend of the heavy duty tow rig back out on the road 😊
I’ll give you a tip. When you’re doing an axle seal and you go to pull the axle out of the hub, take about a 5 lb sledge hammer and hit the axle right in the middle pretty hard, and it should pop right out. When you hit it from the back in a small area with a pick, you could risk messing the flange up
Leave the nuts holding the axle on the studs. If you take the nuts off the studs and you're a little rusty with a sledgehammer and you hit a stud you will have a problem. Probably won't get a nut started on the stud because it's mushroomed from the hammer. If it's bent or really mushroomed the axle won't come out. Leave the nuts till the axle is loose. Bunch of oil will need to be captured.
To add to both of these comments; rather than dicking around pulling the wedges, run the nuts out, put em back on a few threads, then tap the center like stated. It'll free all the wedges and crack everything else loose. Saves a bunch of time.
i drove a big rig tow truckfor 10 years and 99% i had to pull axle shaft and i agree with both but just one smallcomment to add a 10# sluge anda good full swing or ttwo makes it go alot faster
That thing has WAY more miles than you think. Cool rig.
Second tip use a greased tin and pull tires and wheel from the hub in one piece
Check the diameter of the kingpin. I read somewhere that military semi-trailers of that era had larger diameter kingpins. When I had my trucks, when removing the wheel to do brakes I left the tires on. I jacked up the wheel high enough to slide a sheet of oiled thin metal under the tires. after taking off the hub nuts and backing off the slack adjuster I just wiggled the whole assembly and slid it off the hub. That is what I did.
good points
Matt , on your mudflap problem , first shorten the length so they don't drag on the ground . Second , place pins on both sides of hanger bracket to keep the hanger level to the frame. And, PA tractor license plate are required to be on the front of the truck. Keep up the good work.
I love it when good advice is shared 👍
Another GREAT video Matt! Life is "learn as you go". As you go and tackle jobs I too learn! Thanks for the Lessons! As many videos as it takes, I will still wait for each and every one of them. Thanks for you very hard work!
i really do love that old auto Car. That is a real truck. Pure class.
Matt, you really need to weld up at least 2 truck stands for that thing. That lil bottle jack can lift the weight, but your safety req's a wee bit more support. Stay safe man, we really enjoy watching you struggle every week to complete projects the rest of us would most likely fail at. You're doing a great job at the videos too, you've come a long way and it shows.
Cheers for the weekly content.
Some large wooden blocks would suffice.
He's very careful not to get under it and usually does support it. Pretty sure he lifted the grader and worked next to it instead of moving it with dozer just to troll us up a bit.
My grandfather delivered in a Model TT which is in a museum. My dad started driving in 1939 and then an M8 in WWII. He retired in the late 1980s and died in 2012. That whole side of my family were Local 299 teamsters. I went the maternal way and became first a UAW worker then a high school teacher, but I still have diesel in my blood. Love the Autocar.
I have a Model TT tow truck in my garage. The dogs and I go for rides and run errands in it.
Local 299 across from Tiger Stadium on Trumbul Avenue.
I LOVE your two old AUTOCARS ! (but may be a bit biased) I am amazed at your level of patience and have to say your are brilliant at problem solving, then fixing, all while explaining concisely on video. Major props Matt !
It would be nice to see both of them brought back to life but this one is still great
Awesome video, Sir! That old girl will surely repay your time and affection seeing as she IS old nowadays but not tired. Sounded even better after the exhaust repairs, I'd swear-as well as looks great.
Appreciate you taking the time and trouble to bring us folks along on your adventures, lol
I have a feeling we are going to see a "disassembling and cleaning a 5th wheel" video in the near future! 😂 Really enjoy your videos!
Is that release bar on the wrong side??
@@nightsailor1 there's no right or wrong. It depends on who made the fifth wheel and when
I heard you honk the air horn, your electric "City" horn has to work also. The wipers have to work on all speeds it has, (if electric) and if it has washers, they have to work also! Don't forget about reflectors also! Go to the DMV and get a book that tells you all the requirements for the DOT inspection! Air brake leak down test, and warning buzzer and light have to come on a 60 PSI. I cut my teeth driving a 71 Diamond Reo, and a few old Autocars, great trucks to learn on back in the day! That shot of looking out over that big ol hood, brought back many memory's of a time long ago past! Thanks Matt!
If I can add to your valuable suggestion; at 39:30, service air hose near the fitting show some surface ''abrasion'' and for some DMV/DOT it is enough to ground you until repair. Be well ;-)
You worked hard on this project. Lots to do.
Your content is getting better and better. I can’t believe you do all of this alone. I’m envious. Great job.
Thanks Matt, great update, Being Ex military we used to run a different sized King Pin to standard road users, check that diameter, also with the older style turntable / 5th wheel the release handle should pull and turn to release the locking mechanism not saying the one you have does that but worth checking instead of pulling it apart , Good luck mate, looking forward to the next Diesel creek upload
A 3" pin won't slip into a 2.5" receiver that easily. I'd say the original pin was swapped out.
Unless they use some other size I've never heard of.
Surely 3in is standard in the US now
Beem that way for 30yrs in Australia
@@fowletm1992 I don't know, they only pull half the weight....
@@1one3_Racing
Fair point
Prob only need 2.5 for single trailers
As soon as you started wriggling the hub I said to my phone "he hasn't backed the brakes off"
Not because I'm smarter, just because I've done it. More than once. I didn't get the puller out but. That was next level!
You should mount your tail lights on the inside of the frame. If you blow a tire it will rip your light right off the frame.
Just got my auto car Construcktor t- shirt in the mail Love It!
Don’t worry about leaving a cliff hanger, you worked incredibly hard. The only relief you really had was cordless electric tools lol.
Nice work Matt! The straight exhaust pipe probably added $5000 value to the old truck! Before you go anywhere you need to give the truck a good tilt towards the side with the seal that you replaced to make sure the bearing is lubricated well.
As I Watch Wes Work, here on TH-cam. I noted he always soaked his bearings in oil prior...
I love this rig! All the beautiful old cast parts, hubs, winch, etc. are top notch and you CANNOT beat the industrial orange color! Awesome!
Oh my, so many comments! I just wanna say; stinkin' cool! You've got yourself a mad machine there, Matt! Love it! As with all of your videos really 😎
Matt, great video for a Sunday afternoon! I think some custom “Diesel Creek” mud flaps would be a cool future add-on to the truck!
Had to laugh on a video or so back when you were struggling in the metal (gravel) with your floor jack and I was thinking - "man I bet there isn't going to be a day too soon for your new workshop", to where I had hardly thought it and you said virtually the same thing! Haha, hopefully that day isn't too far away - you deserve it! PS. Hopefully you share the build of it too Matt.
Thats what i like to see.. this old gal goin back to work.. she may be old but she aint tired, plenty of life in her yet.. they sure dont make them like that anymore.. shes a fine rig! 😁👍🇦🇺
You're right nothing is ever easy, I commend you on sticking to it!
Been waiting all day for an upload. Keep up the good work Matt.
Great job, Matt! LEDs always are polarity sensitive, unlike incandescent bulbs.
Actually the newer ones aren't all polarity sensitive.
Love that tractor I wouldn’t paint it it looks good it sounds good I put a lot of clutches in Springs in a fleet of trucks exactly like that they were solid great video
CONSTRUKTOR!!! The name alone deserves the love! Man I love there old Autocars! I'm so glad you are saving one and using it to haul real equipment. Thank you for taking us on your journey with this awesome piece of rugged iron.
Matt, I'd take the windshield out and seal and repair the rust and any missing metal under the seal, new seal won't last long with a compromised base metal. Love your channel, evertime I watch I gives me the motivation to work on both my '48 Willys pickups.
Cool trucks, get out there and give ‘‘em some love
if im not mistaken that truck has a aluminum cab I believethat's what he said I the first video of it
@@stingray427ss4 - There sure was a lot of rust on the roof when he was replacing the marker lights to be aluminum.
@@flick22601 I could very much be wrong then
@@flick22601 I was wrong I went and looked back at the first video matt said he thought it was aluminum I didn't read the caption saying it was steel
To save on mud flaps, get another set of brackets and mount them in front of the front drive axle. You don’t need mud flaps if you’re pulling a trailer, and if you’re working off road, it doesn’t matter if you have them or not. Move the mud flaps from the rear brackets to the front brackets any time except for when you are running bobtail on the highway.
Thanks Matt, love watching progress on that Autocar!
The smoke trail was insane. I love the videos with a lot of engine smoke while the machine is running
Yep you could see a 220 or 250 coming a mile off and for sure could smell them
Matt, I learned a trick to make removing the axle wedge locks easier. Take an old pair of channel locks and grind the top jaw down to almost a knife blade but leave the bottom jaw alone. Remove all the axle nuts and hit the end of the axle shaft, this should bounce it out some. Shove the axle back in and use your new wedge lock tool to open the wedges more and pull them out easy. Hope this helps. I used to work on trucks and tractors in my younger years and still love watching your channel. They probably make a tool for removing those wedge locks but an old truck mechanic showed me how to make one using a old pair of channel locks and now I’m sharing it with you.
The tool dealers sell those wedge pliers.
Hey Matt always love your videos
got a few tips for ya
I'm a diesel mechanic up here in Canada that might help ya out
I sees ya figured out about backing off the brakes to remove the hub easier great job brother
Tip 1
To remove then cones on the axles put the nuts back on the axle just at the end of the treads then hit the center of the axle hard with a sludge hammer and the vibration from hitting the axle will pop the cones out exactly like the wedges for the spoke wheels ( leaving the nuts on will stop the cones from flying off )
Tip#2 pre lube your inner bearing - little lube on your unitized seal when installing then little lube on the spindle to allow the hub to slide on easy - put the hub half way on to alway you to fill the hub with oil then hub goes on pre lube the outer bearing befor installing - install hub
Torque the inner nut to 250 lbs spin the hub 1 full rotation Torque again to 250 and repeat a 3rd time, then back off the nut 1 full turn
Then Torque to 50lbs do not rotate the hub wile torqu8ng this 50 lbs the back off 1/4 turn and that should be good
Tip 3 the lock ring has the tab and holes on it -if the dowel is 1/2 way in the hole of the lock ring ,flip the ring over it is designed that it will line up 1/2 a hole length from one side of the ring to the other
Then last Torque the outer nut to 250lbs
Great Video! Loved the way,you took the bull by the horns,and showed everybody who’s Boss.
A lot of resistance by the machines.
Christine isn't the only princess on the pea here, Matt.
But I'm confident you'll solve the problem.
Tom😎
nothing better than a sunday morning diesel creek video !!makes my morning soooooo much better !
Just remember when you hook up the winch, you can add gin poles and use the truck as a lift as well. Also, sorry about the problems with the fifth wheel. Nice content, Matt. Thanks a lot.
paint the roof and that front massive bumper awesome truck
Awesome truck Matt. Glad to see it back on the road! Can't wait to see what all you use it for.
I didn’t think the brake shoes would clean up that good. Good job Matt!
Haha sometimes you’re the reason for the safety meeting, other days you’re the one they call when they need to do something sketchy
Awesome tractor. I absolutely love old Autocars. There has never been a truck built as beautiful as an Autocar. What a beast.
Yup it's a lot easier to get the drum off if you back the slack adjuster off...😆 🤣, I did the same thing years ago on my first big rig brake job! I love the old Autocar by the way and I really enjoy you videos.
From working years in the field, a tip. When doing brakes and wheel seals, etc, Yes, cage the brake first. Do not take the wheels off, leave on the hub as an assembly, pop the axle shaft in the center to remove the split cone washers. If not using a crane or lifting device, Lift the truck enough to put a small sheet of plywood twice the width of the dual under the wheels. (You wont need plywood if working on concrete.) Now, On a piece of cardboard, twice the width of the dual wheels also, put a thin layer of grease, set the truck down until just touching the cardboard, remove the lock nuts, then with the wheels just resting on the card board, you should be able to pull the wheel assembly off, sliding on the grease. A pressure washer works great to remove all the oil, dirt etc. Then when assembling, you may need a bit more grease on the cardboard, slowly line up the spindle to not damage the seal, push the assembly back on. The etc, reassemble.
I was going to suggest that idea kinda... except we used a piece of sheet alum (cause we had it, old trailer side) and put motor oil on it...lol. If you do enough, ya figure the easy way. ~ U&R Express inc.~
Been watching your content for quite awhile now and absolutely love your channel. Your so down to earth And funny. Keep up the good work . I always want to see what you come up with each week, Cheers!
I'm really happy that you put a nice looking stack on that old girl. I LOVE those older trucks and when they look nice, it always puts a big smile on my face.
great job. your persistence paid off.
Tip, if the seal has a spring that is used for tension , pack the seal with grease so when you "persuade" the seal back on, that the spring wont pop out . Once grease, diff fluid, or brake fluid has soaked into brake pads or shoes no matter how clean them , once they get hot, the matter will come out and cause a lock up of that wheel. Replace only.
My favorite video of yours yet! I LOVE seeing these old classic pieces of iron having the work done to get them back on the road and doing the job they were built to do. And putting a flapper cap on the exhaust stack... *chef's kiss*
loved seeing her driving down the road!
GOOD JOB! Great Show! Thanks again!
Matt if you hit the center of the axle it will “bounce “ the axle off the hub. The keepers will come out also.
Yep. Leave the nuts on a couple turns to catch the keepers so they don't go into LEO and give it a couple good heavy whacks right dead center. Pops out every time.
I was coming to say that. Learned that from an old timer that was watching me get my butt kicked by them. 2 good hits and it came out.
Yeah that never works when the cones are mushroomed into the threads from the nuts being torqued .
Matt, ensure the differential vent on top of the diff is clear.
If it’s plugged, that will cause condensation buildup in the diff.
was bout to comment the same thing
You're doing a fantastic job getting the Auto car back on the road! Can't wait for the next video,when you can go cruising with that trailer!! Keep up the amazing work Matt!!
Seems you’ve been getting better quality items lately. Always enjoy watching someone else doing the work. Enjoyed this one so much I’m watching it twice and I have nothing to work on myself today… oh and yeah you did get a lot done in a week!
Beautiful how these guys put this older stuff in service instead of going in debt..