Marine blackwater holding tank pump out and rinse system for DIY @ home into septic or sewer system

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ต.ค. 2024
  • Blackwater Bazooka by Sixo Design.
    Pump out and rinse your marine holding tank with the Blackwater Bazooka. This device is simple to use and allows you to pump out your holding tank at any RV dump station or into your own septic/sewer system/ toilet/ floor drain/sewer vent/ or containment vessel. You will not be limited to using marine pump out stations on the water or marina.
    This device does not require alterations to your vessel. All you need is access to a pressurized water supply (common garden hose bib for priming then rinsing), a 12 volt D/C power source (vehicle battery) and an approved waste container or nearby septic/sewer system. (RV dump site, sewer floor drain, toilet bowl etc.) Simply attach the device to your vessel’s waste fitting to pump out and rinse the holding tank. This device adapts to both horizontal and vertical "WASTE" ports. We custom build each unit to adapt to any configuration or specific needs.
    Email us with contact information and we will send you an invoice to pay through a secure server. Customer satisfaction is our priority.
    Visit us at the address below for more detailed information or sales inquiries.
    www.blackwater...
    John McGregor
    Mead, WA. 99021
    (509) 370-2122
    Sixodesign@gmail.com

ความคิดเห็น • 18

  • @dinolover12354
    @dinolover12354 3 ปีที่แล้ว +2

    My boat got hauled before I was able to get it pumped out. Just finished pumping out a 25 gallon tank on a 40’ sport fish with this and I am so pleased. I tried to call every on land service to get pumped out and no one was doing boats . When I started to loose suction I would prime the pump with a shot of fresh water inlet and it would continue . Easy to flush and highly recommend this product.

    • @blackwaterbazooka
      @blackwaterbazooka  3 ปีที่แล้ว +2

      Thank you very much for the review. I had this same problem with my own boat needing to be pumped out and no place to get it done at the end of last season. The only way I could find was using a shop vacuum. It works but you will only do it once. That gave me the idea for this design. After building and refining it I decided to sell them to friends who encouraged me to share them online. Sales have been as far away as Oman (near Saudi Arabia). Customers have been very pleased with their purchase. Satisfaction is our biggest priority.

  • @bosunboy
    @bosunboy 4 ปีที่แล้ว +3

    Stellar step by step video. Great job.

  • @GurnBograt1986
    @GurnBograt1986 4 ปีที่แล้ว +1

    This is pretty cool!!

  • @miamibaiz7100
    @miamibaiz7100 4 ปีที่แล้ว +1

    hello, approximately how much water is required for rinsing? How much is too much? Do not want to overflow vents. thank you

    • @blackwaterbazooka
      @blackwaterbazooka  4 ปีที่แล้ว +1

      It would depend on how many gallons your holding tank is. Mine is 16 gallons so after the tank has been emptied on the initial pump out I run the freshwater rinse hose for about 2 minutes then rinse. That fills it about 1/4 full and then pump again. If the liquid is not running fairly clear I repeat. If you are concerned about overfill just do a few rinse cycles with less time on filling. With very little practice you will get a feel for it.

  • @DougTechNews
    @DougTechNews 3 ปีที่แล้ว +1

    How far away can you be from the septic/sewer system/ toilet/ floor drain/sewer vent?

    • @DougTechNews
      @DougTechNews 3 ปีที่แล้ว +1

      Never mind. Saw it on your ebay listing, up to 100 feet.

  • @donnieburns6164
    @donnieburns6164 3 ปีที่แล้ว +1

    Great design! What are you asking for these?

    • @blackwaterbazooka
      @blackwaterbazooka  3 ปีที่แล้ว +1

      Hey Donnie thank you for your interest in our product. The price is $349 with free shipping via USPS Ground from Mead WA. 99021. We typically ship ground which could be up to 5 days travel but will expedite it if you chose that method for an additional charge. If you would like to purchase one just send me an email and I will generate an invoice for you to pay through PayPal.

  • @clintpreston81
    @clintpreston81 3 ปีที่แล้ว +1

    Hello John, I have tried to email you but the e-mail does not seem to go through. Are you still selling these direct.
    Thanks

    • @blackwaterbazooka
      @blackwaterbazooka  3 ปีที่แล้ว +1

      Hi Clint the email did go through so I responded back so let me know here if you didn't get the reply.

  • @nickstickell3204
    @nickstickell3204 4 ปีที่แล้ว +1

    How far of a head can it pull?

    • @blackwaterbazooka
      @blackwaterbazooka  4 ปีที่แล้ว +1

      The pump manufacturer documents no loss of flow at 5 feet. Beyond that it begins to diminish. If using our system as shown on the video in a vertical mounted waste port the has gravity working in a siphon action to increase the head lift distance. Also the discharge hose helps in the siphon action if it is all downhill too. Bottom line is it all depends on several factors in the setup orientation. The pump itself though is rated at 5 feet. When using the freshwater input hose the lift increases.

  • @joenestor4903
    @joenestor4903 3 ปีที่แล้ว +1

    Where can I buy one

    • @blackwaterbazooka
      @blackwaterbazooka  3 ปีที่แล้ว +1

      Hey Joe, thank you very much for the interest in our product. We are currently finishing up another production run and will have more ready to ship by end of this week(04/09/2021). If you send me a request via email then I can respond and include an invoice to pay through PayPal.
      John McGregor
      Sixodesign@gmail.com.
      (509)370-2122 cell.

  • @GlennBarres
    @GlennBarres 2 ปีที่แล้ว

    Where can I get that device

    • @blackwaterbazooka
      @blackwaterbazooka  2 ปีที่แล้ว

      Just email me and I can reply with an invoice.
      Sixodesign@gmail.com