Thank God you did this video. My wife's 2010 Venza had the same problem, and the Toyota dealership quoted her $3324 to fix the problem. They said the entire HVAC assembly needed replacing when it was a $138 servo motor instead.
I love that you posted this; thank you for your efforts here. Your expletives at the end, perfectly capture the pain of the required car contortionism :)
Thanks for making this video. It helps explain why there is a delay on the HVAC controls when I turn my car on and why it doesn't remember the previous settings now that the driver's side blend door is dead. The Toyota dealer charged me $178 to diagnose my driver's side heat problem in my 2013 Sienna is the servo, but they told me that it's normal for the HVAC controls to delay 30-60 seconds and not remember the last setting , even though both things showed up within a day of each other. Idiots. I wish you could fix my car. Thanks!
YOU ARE A SAVIOR!!!! I have the same exact issue with my 2019 Toyota Corolla LE. I have been quoted $1000+ for this piece. They don’t actually know how to fix the problem. Thanks man 🙌🏾🙌🏾.
Mine has the same exact issue as your car in the video but it blows no heat at all and cool air up to 70 degrees. Do you think it’s the same part that needs to be replaced.
Thank you so much for doing this video. It was definitely not easy to film. Appreciate all the info and detailed help! It is really a huge blessing for me since i'm going through the exact same issues
Great video! I have a 2014 RX350 with a similar problem. The passenger side goes from cold to warm but never gets hot. Where did you get the replacement instructions?
I don't know why you are watching the video if you are blind. I made time and effort to make this video, all the information is within said video and description. If you go to 2:53 time stamp, and actually open your eyes it says "info link in description". If you actually made the smallest amount of effort to go to the description, there is a part where I said "how to remove parts according to the service manual" and there is a link above this sentence in the description. I made time to make a video and there is a diagram of how to get to this part in that link with STEP BY STEP INSTRUCTIONS. I suggest you bring your vehicle to the dealership or someone who knows what they are doing.
Great video! Question, when you were having the problem, do you recall if the modes also didn't work? Meaning, the air blowing out was stuck on one of the modes and the rest didn't work? I'm having that problem with my 2011 and I'm wondering if this part will fix it.
All the modes worked, just the temperature didn't work. If you look at the website I linked, I believe there is another actuator motor that deals with the modes. If your modes are broken, this is not the part. You need the part that changes the modes. This part only changes the temperature.
does the air coming out from the air vent become slightly slower when we increase the temperature of the climate control?the air coming out from the vent become slower on my car...i want to know is it normal...
What's happens if the gear that the motor connects to is broken off, the white piece? A while ago I noticed a broken piece which looked actually like the one in this video. However, when I followed what you did I notice mine is missing. Then I remembered the piece I found. Looks like it deteriorated. Only the front vents left and right work. The middle and rear passenger does not... I have a wife and two little ones. Takes time but I'm cooling the car with front left and right vents only and defog
I have a camry 2014 XLE, the passenger side Heat doesn’t work and no problem with driver’s side..so now should I replace blend door acuator only on passenger side or on both sides?
If your car has dual climate control, there should be a blend door actuator for each side. The blend door actuator just mixes the temperature into the car. So, yes just replace the passenger side. No need to fix something that aint broke.
In my case Venza 2011 Temperature is changing everywhere, however not able to defrost windshield at all. Air not blowing from vent under window absolutely. How to find out from wich side need to change actuator or "blend door actuator"?
In your case, follow that link, you should be able to find another servo motor for the modes. There is a servo motor for the temperature (one in this video) and theres another servo motor for the modes. You can always go to the dealership and ask them which servo motor is for the modes, get the part number and could try to find it cheaper online or order through dealership.
Hey I have a Toyota Corolla 2016 s I have an issue with the a/c that doesn’t change modes and when I start the car it stays in auto for half a minute and I don’t know if I change that It will fix the problem.
It means your mode actuator is broken. There is a separate actuator for the modes and temperatures. You will need to search that up yourself, or just ask the dealership to guide you to the right part. You can ask for a parts diagram they will print out for you. Just go ask the parts department.
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
Thank God you did this video. My wife's 2010 Venza had the same problem, and the Toyota dealership quoted her $3324 to fix the problem. They said the entire HVAC assembly needed replacing when it was a $138 servo motor instead.
Glad I could save you $3186!
I love that you posted this; thank you for your efforts here. Your expletives at the end, perfectly capture the pain of the required car contortionism :)
Thanks for making this video. It helps explain why there is a delay on the HVAC controls when I turn my car on and why it doesn't remember the previous settings now that the driver's side blend door is dead. The Toyota dealer charged me $178 to diagnose my driver's side heat problem in my 2013 Sienna is the servo, but they told me that it's normal for the HVAC controls to delay 30-60 seconds and not remember the last setting , even though both things showed up within a day of each other. Idiots. I wish you could fix my car. Thanks!
I love the commentary 😂 I'm a mechanic for a living and those cuss words are the language of my people 🤣
Thanks so much for posting this video. I was able to replace my own blend door actuator. Saved me a ton of money and I’m feeling accomplished 👊🏻
YOU ARE A SAVIOR!!!! I have the same exact issue with my 2019 Toyota Corolla LE. I have been quoted $1000+ for this piece. They don’t actually know how to fix the problem. Thanks man 🙌🏾🙌🏾.
Mine has the same exact issue as your car in the video but it blows no heat at all and cool air up to 70 degrees. Do you think it’s the same part that needs to be replaced.
Seriously, thanks for doing this man! I heard my own voice in take 2 so I know the feeling even when not trying to record. 🤬
Got same issue today with my 2013 Venza, will order $50 actuator on Amazon.. thank you.
got the same on my Venza 2013... Thanks a lot for the sacrifice ! appreciated!
Thank you so much for doing this video. It was definitely not easy to film. Appreciate all the info and detailed help! It is really a huge blessing for me since i'm going through the exact same issues
Your video helped me identify the problem, thanks a lot!
Thanks man. Mitchel says to remove the entire dash. With your video i was done I. Half an hour.
Great video! I have a 2014 RX350 with a similar problem. The passenger side goes from cold to warm but never gets hot. Where did you get the replacement instructions?
I don't know why you are watching the video if you are blind. I made time and effort to make this video, all the information is within said video and description. If you go to 2:53 time stamp, and actually open your eyes it says "info link in description". If you actually made the smallest amount of effort to go to the description, there is a part where I said "how to remove parts according to the service manual" and there is a link above this sentence in the description. I made time to make a video and there is a diagram of how to get to this part in that link with STEP BY STEP INSTRUCTIONS. I suggest you bring your vehicle to the dealership or someone who knows what they are doing.
Great video! Question, when you were having the problem, do you recall if the modes also didn't work? Meaning, the air blowing out was stuck on one of the modes and the rest didn't work? I'm having that problem with my 2011 and I'm wondering if this part will fix it.
All the modes worked, just the temperature didn't work. If you look at the website I linked, I believe there is another actuator motor that deals with the modes. If your modes are broken, this is not the part. You need the part that changes the modes. This part only changes the temperature.
Can that cause the hotness in driver side only
does the air coming out from the air vent become slightly slower when we increase the temperature of the climate control?the air coming out from the vent become slower on my car...i want to know is it normal...
Very detailed! Thank you!
What's happens if the gear that the motor connects to is broken off, the white piece? A while ago I noticed a broken piece which looked actually like the one in this video. However, when I followed what you did I notice mine is missing. Then I remembered the piece I found. Looks like it deteriorated. Only the front vents left and right work. The middle and rear passenger does not... I have a wife and two little ones. Takes time but I'm cooling the car with front left and right vents only and defog
Sorry you probably already fixed it by now hopefully, but if you found the same servo motor as mine, and its broken, you will need to replace it.
I have a camry 2014 XLE, the passenger side Heat doesn’t work and no problem with driver’s side..so now should I replace blend door acuator only on passenger side or on both sides?
If your car has dual climate control, there should be a blend door actuator for each side. The blend door actuator just mixes the temperature into the car. So, yes just replace the passenger side. No need to fix something that aint broke.
shift happened! thanks. I feel your pain
In my case Venza 2011 Temperature is changing everywhere, however not able to defrost windshield at all. Air not blowing from vent under window absolutely. How to find out from wich side need to change actuator or "blend door actuator"?
In your case, follow that link, you should be able to find another servo motor for the modes. There is a servo motor for the temperature (one in this video) and theres another servo motor for the modes. You can always go to the dealership and ask them which servo motor is for the modes, get the part number and could try to find it cheaper online or order through dealership.
thanks for this video, appreciate you.
Good video, nice job
So I have a question the blend door tooth on driver side is broken and it stays on cold all the time . What do I need to replace in this case ?
If im not mistaken you will have to do the same thing here, replace the entire servo motor.
Hey I have a Toyota Corolla 2016 s I have an issue with the a/c that doesn’t change modes and when I start the car it stays in auto for half a minute and I don’t know if I change that It will fix the problem.
It means your mode actuator is broken. There is a separate actuator for the modes and temperatures. You will need to search that up yourself, or just ask the dealership to guide you to the right part. You can ask for a parts diagram they will print out for you. Just go ask the parts department.
Excellnet job!
My venza driverside ac act funny. The driverside only blow warm air. But if i put it on heat for sometime and put it back to cold then it gets cold.
How many hour job do u charge for this. Labor ? $
I know this is old, but you should talk louder, unless you had the car in the bedroom and didnt want to wake the wife
Yea I agree, but its just weird talking to yourself to make a video
Hhhhhh