HOW TO: Install OneWheel GT Enduro Tire & Float Life Savers

This video will show you exactly how to do a OneWheel tire swap. Specifically the Enduro tire on the Onewheel GT. Also threw on the Float Life Savers! Hopefully you will be able to learn something and laugh at my struggles

[@baileyanderson2166]

i dropped a like for the part where you took the tire off

[@RichieValentine]

I appreciate the trial/error and humor! This is going to be helpful when I get my Enduro... I just ordered it today!

[@ohiohuncho]

If I can do it with bare minimum tools, you can too! Good luck 👍🏼

[@RemingtonTerritory]

You’re really funny man, keep up the good work. maybe we could shred in the future.

[@ohiohuncho]

Thanks my friend!

[@RemingtonTerritory]

@@ohiohuncho my green bang bumpers reflect on the ground at night so it looks like I have a green light. Do those blue ones do the same thing?

[@juliosapere8010]

That’s an awesome easy approach you showed that you can do it with just your hands

[@jeremyshearer]

You don’t need to take off sensor.. flip board over remove front bumper then unplug the motor off the sensor then the axle bolts

[@KaizenOz]

You don’t need to take it fully apart, remove front bumper, unplug motor cable, remove axle bolts and motor drops out

[@Lifelivenaged]

That looked a bit much

[@rocketman724]

I hope this guy is a lot better at riding than he is at modifying a Onewheel……

[@elitevisualsllc]

Are those life savers in the blue raz or teal color?

[@lico464]

Mine set at a high psi too. It was set at 60. It doesn’t scrape but I get pretty bad speed wobbles and the stability is sketchy. I’m thinking it could be warped too.

[@c0pyimitati0n]

Lol 60psi is extremely low
Try setting a stock Vega tire 😂 That fucker usually takes over 100psi to set. (And it's perfectly fine, people worry too much but the tire can absolutely handle setting at that high of psi)

[@RemingtonTerritory]

@@c0pyimitati0n I think you’re high. My first bead set at 36 and the other at 42. I would suggest using bead buddy or tire lubricant if you are setting above 50 on a regular basis.

[@luciaabreu6011]

struggling putting it back on :(

[@ohiohuncho]

you can do it

[@c0pyimitati0n]

Yo, where in Ohio are you? I'm in Dayton if you ever wanna float

[@zollie3576]

քʀօʍօֆʍ ❤️

[@theartistsplane3575]

Do not remove the power cable! Remove the motor cable! If you disconnect your battery you will brick your board!!!!!!

[@Tactical_Taco]

A lot of people are misinformed on this. It only bricks if you go to change out the battery. As in opening the battery box using specialized tools and disconnecting the battery from the BMS.

[@deemontes7265]

Keep that bad tire and round it out with a thick file tool