This YOU MUST know about VINYL CUTTERS

#commissionsearned #sponsored #vinylcutter #decalbusiness #carstickers
In this video we are going to share a few things that you must know about vinyl cutters, what products you will be able to make, from: car decals, vinyl banners, car magnets, wall decals and a lot more. All the information we share here and the vinyl cutters we talked about is from actual experience. We either own or have worked with each and every cutter we covered. The first vinyl cutter is the Silhouette Cameo 4 12" and you can get it for under $300.00 dollars. The second vinyl cutter is the Uscutter Titan 3 and you can get it for a little over $1000.00 dollars. Our friend Eduardo has owned this cutter for a few years and totally loves it. The third and most expensive - but totally worth its weight in gold, is the Graphtec CE6000-60. All the links to all the products are down below.
OUR SECOND CHANNEL: / @evaristobrothers
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Get your blank shirts here: bit.ly/3RA6DdF
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Siser color guide: amzn.to/3ZuQJ60
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Get your equipment & materials through uscutter: uscutter.com/?ref=StickerAfic...
RTAPE CLEARCHOICE AT75: uscutter.com/Rtape-Clear-Choi...
00:00 Introduction
00:14 Digital printer - best way to make stickers
00:34 Main reason why we use vinyl cutters
01:01 Silhouette Cameo 4 12"
01:20 3 reasons why we love Cameo 4
02:19 Uscutter Titan 3
02:44 Is Titan cutter worth it?
03:51 Graphtec CE6000-60
04:56 Our most recent projects
05:20 Products we make with a vinyl cutter
05:53 Type of customers that will keep you busy
06:17 About outsourcing products
06:46 Things to remember before buying cutter

[@RDIdecals]

OUR SECOND CHANNEL: www.youtube.com/@EvaristoBrothers
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Siser color guide: amzn.to/3ZuQJ60
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Get your equipment & materials through uscutter: uscutter.com/?ref=StickerAficionado
RTAPE CLEARCHOICE AT75: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape/?ref=StickerAficionado

[@bandotrax]

Cameo 4 and Cameo 4 Pro. They get the job done plus I'm not bothered by the machine making sounds, I'm used to machines making noise.

[@RDIdecals]

Yes, we love our Cameo 4 and don’t mind the noise either. Thanks for watching!

[@SublimationGuy]

I have not been using my Cameo as much as I would like but I have enjoyed it so far! Outsourcing is sometimes hard with all of the equipment easily available to buy sometimes lol!

[@RDIdecals]

We don’t use our cameo 4 as much either 😅. Thanks for watching!

[@Gollog99]

Hello,
Thank you in advance for all the informative videos.
I have a question about cameo 4:
Cutting width is 30cm/12inch, but what maximum roll width can you feed?
I couldn't find anything about that.
Thanks for the answer and best regards from Austria

[@RDIdecals]

Hello! According to what we found on the web, you can up to 10 feet in length without using a cutting mat. Thanks for watching!

[@Gollog99]

@@RDIdecals thx for your answer, this is what i also found, but i could not find anything to the roll width, is it possible to feed the cameo with a 13 inch role, i know 12inch cutting width, but in austria i could not find any reseller who has 12 inch oracle 651, and i have no ides how i cut a 40 inch role to 12 inch 🙂

[@maximum5409]

Hi guys, can you tell me what type of vinyl you use for making your t-shirts Thanks 😊

[@RDIdecals]

We use htv brand SISER EASY WEED

[@maximum5409]

@RDIdecals Ok, thank you 😊

[@danbailey96]

Graphtec has a better software now in the studio...cut software to design and cut your vinyl
I mainly use vinyl master pro it's a great software.

[@RDIdecals]

Hello Dan! Thanks for sharing this with us 😎